Signal Conditioning Modules
OP5000 Series
|
Model Name
|
Family
|
I/O Type
|
Channels
|
Mode
|
Voltage (V) |
Current (mA) |
Gain
|
| OP5210 | Type A Carrier | Dual Mezannine Carrier |
|
|
|
|
|
| OP5311 | Type A Mezzanine | Opto-Isolated Digital Input |
16
|
Sink
|
5-30
|
5-10
|
|
| OP5312 | Type A Mezzanine | Opto-Isolated Digital Ouput |
16
|
Sink
|
5-30
|
100
|
|
| OP5313 | Type A Mezzanine | Prototype Board |
16
|
|
|
|
|
| OP5320-1 | Type A Mezzanine | Analog Differential Input Amplifier |
16
|
Bipolar
|
|
|
0.5
|
| OP5320-2 | Type A Mezzanine | Analog Output Amplifier |
16
|
Bipolar
|
±16
|
|
2
|
| OP5320-3 | Type A Mezzanine | Analog Output Amplifier |
16
|
Bipolar
|
±16
|
|
1
|
| OP5220 | Type B Carrier | Dual Mezannine Carrier |
|
|
|
|
|
| OP5222 | Type B Carrier | Single Mezannine Carrier with voltage amplifier | |||||
| OP5330 | Type B Mezannine | Analog Output |
16
|
Bipolar
|
±16
|
|
|
| OP5340 | Type B Mezannine | Analog Input |
16
|
Bipolar
|
±20 to ±100
|
|
|
| OP5350 | Type B Mezannine | Prototype Board |
16
|
|
|
|
|
| OP5236-1 | Type C I/O Carrier | Differential LVDS |
32
|
Differential
|
|
|
|
| OP5236-2 | Type C I/O Carrier | TTL Isolated |
32
|
TTL
|
5
|
|
|
| OP5237-1 | Type C I/O Carrier | High Voltage Digital In/Out |
62
|
32 Dout Sink
30 Din Source |
150
|
6-1000
|
|
| OP5237-2 | Type C I/O Carrier | High Voltage Digital In/Out |
62
|
32 Dout Source
30 Din Source |
150
|
6-1000
|
|
| OP5231 | Type C I/O Carrier | Fiber Optic Digital Inputs and Outputs |
32 | In / Out | - | - | - |
| OP5232 | Type C I/O Carrier | Amplitude Modulation Board | 16 | In / Out | ±4 | - | - |
| External Board | High Voltage Analog Out |
2
|
Bipolar
|
±75
|
|
|
|
| External Board | High Voltage Analog Out |
8
|
Bipolar
|
±5
|
±1000
|
|
|
| OP5251 | Type C I/O Carrier | Digital Inputs and Outputs | 32/32 | Dout Sink Din sink/source |
4-30 | 0-100 | |
| OP5252 | Type C I/O Carrier | Digital Outputs | 64 | Dout Sink | 4-30 | 0-100 | |
| OP5253 | Type C I/O Carrier | Digital Inputs | 64 | Din sink/ source | 4-30 | ||
| OP5961 | External Board | High Current Relays |
8
|
Contact
|
250VAC - 30VDC
|
8000
|
|
| OP5511 | External Board | High Voltage and High Current Input Module | 8 | Inputs | 600V | 50 Amp. |
Test-Drive Modules (OP6000 Series)
Test-Drive Modules are compatible with the Test-Drive Simulator Chassis
|
Module Name |
Function | Applications | Voltage range | Current Limit or Power Limit | rms Current protection | Short Circuit protection |
| BASE MODULE with POWER MODING | Digital outputs (high current) | Ignition, Crank, other power bus simulation | 0 to 16 volts | 25 Amp Continuous | No | Yes |
| PULSE DRIVEN LOAD MODULE | Analog/Digital/PWM inputs | Frequency Measurement Speed Sensor Measurement | 0 to 16 volts | N/A | N/A | Yes |
| ANALOG SENSORS MODULE | Analog outputs | Pressure transducer, condition temperature (engine coolant), Potentiometer (pedal sensor, volume) | 0 to 16 volts | 200mA continuous 300mA pulsed | Amplifier Thermal Protection | Yes |
| Current Limit Protection | ||||||
| SWITCH MODULE | Digital outputs | Any switch, Gear level, Doors locked, Seat belt on, Brake/Glass limit switch | 0 to 16 volts | 2 Amp continuous | No | Yes |
| PULSE OUTPUT MODULE | Analog outputs | Wheel speed sensor, variable frequency | -12 to 12 volts (analog) | 200mA continuous 300mA pulsed | Yes | Yes |
| 0 to 16 volts (digital) | ||||||
| RESISTIVE SENSOR MODULE | Resistor Simulation 5Ω to 2MΩ |
Temperature, Thermistors | 0 to 24 volts | 250 mW | Yes | Yes |
| REFERENCE PULSE GENERATOR MODULE | Engine specific Signals Generators | Crank, Cam spark, injector knock Timing | -12 to 12 volts or 0 to 16 volts | 200mA continuous 300mA pulsed | Resettable Thermal Fuse Shutdown | Yes |
| 24 digital inputs | 0 to 16 volts | N/A | N/A |
.png)