> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/accessories-conditioning-modules/accessories/op8210-connection-interface-series/op8216-db37-to-optical-fiber-interface.md).

# OP8216 DB37 to Optical Fiber Interface

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2F23o05wkxj92wVvG2ZnXA%2Fimage.png?alt=media&amp;token=95a30665-0128-4c8c-b65c-814f584346b2" alt=""><figcaption><p>OP8216-32-3</p></figcaption></figure>

## Description

The OP8216 is a **DB37 connector-to-fiber-optic channel** interface **output (TX)** or **input (RX)** depending on selected configuration.

The board  can hold **optical transceivers** to

* **Converts logic signals into fiber-optic signals (transmit channels)** or
* **Convert** **fiber-optic signals into digital logic signals (receive channels)**.&#x20;

This **ensures optical digital input and output isolation** between the **OPAL-RT simulator** and the device under test (DUT).&#x20;

The transceivers are compatible with **plastic optical fiber cables** (**650 nm wavelength**). Their **frequency range is DC to 25 MHz**, corresponding to a **50 Mbps baud rate**, for **distances up to 50 meters**.

The **20 ns minimum pulse width** allows use as an **isolated digital I/O card in DC mode** or with **low-speed communication protocols**.

## Configurations

### OP8216-16-1

* **16-channel Tx panel**: DB37 to 16 fiber-optic outputs (Tx)

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FfVP8ckBR9GfaNm6kw4yi%2Fimage.png?alt=media&amp;token=8bcba338-70dd-4a61-8ce6-6df9a4176028" alt=""><figcaption><p>OP8216-16-1 front view</p></figcaption></figure>

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2F57GuveTKRnfSwW6OtnKX%2Fimage.png?alt=media&amp;token=79df7b63-1faa-4dfe-87a7-d307a0273caf" alt=""><figcaption><p>OP8216-16-1 rear view</p></figcaption></figure>

* The configuration includes **one (1)** 5 ft (1.5 m) **DB37 male-to-male cable**.

### OP8216-32-1

* &#x20;**Two 16-channel Tx panels**: DB37 to 16 fiber-optic outputs (Tx)

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2F191cU0tLG9ItmXIGhGGe%2Fimage.png?alt=media&amp;token=d5a0dd0a-eb0b-4e39-8e30-dec2b117e847" alt=""><figcaption><p>OP8216-32-1 front view</p></figcaption></figure>

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FxK5Nbl1E1ilqu5P5TCxL%2Fimage.png?alt=media&amp;token=4110b07c-722e-4713-933a-cbc62a942cb7" alt=""><figcaption><p>OP8216-32-1 rear view</p></figcaption></figure>

* The configuration includes **two (2)** 5 ft (1.5 m) **DB37 male-to-male cables**.

### OP8216-16-2

* **16-channel Rx panel**: DB37 to 16 fiber-optic inputs (Rx)

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2F8m4MchjO3KEmug6snYdD%2Fimage.png?alt=media&amp;token=547aa79b-2db7-4306-a798-41c2baa692ac" alt=""><figcaption><p>OP8216-16-2 front view</p></figcaption></figure>

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2F57GuveTKRnfSwW6OtnKX%2Fimage.png?alt=media&amp;token=79df7b63-1faa-4dfe-87a7-d307a0273caf" alt=""><figcaption><p>OP8216-16-2 rear view</p></figcaption></figure>

* The interface includes **one (1)** 5 ft (1.5 m) **DB37 male-to-male cable**.

### OP8216-32-2

* **Two 16-channel Rx panel**: DB37 to 16 fiber-optic inputs (Rx)

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FT3ES4FXVumPtWi2UW8HM%2Fimage.png?alt=media&amp;token=6d608796-5757-4228-b02d-349626ef5992" alt=""><figcaption><p>OP8216-32-2 front view</p></figcaption></figure>

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FxK5Nbl1E1ilqu5P5TCxL%2Fimage.png?alt=media&amp;token=4110b07c-722e-4713-933a-cbc62a942cb7" alt=""><figcaption><p>OP8216-32-2 rear view</p></figcaption></figure>

* The configuration includes **two (2)** 5 ft (1.5 m) **DB37 male-to-male cables**.

### OP8216-32-3

* **16-channel Tx panel**: DB37 to 16 fiber-optic outputs (Tx)
* **16-channel Rx panel**: DB37 to 16 fiber-optic inputs (Rx)

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FwrWc2kdkqUdAC0IYpyq1%2Fimage.png?alt=media&amp;token=4ca63bf5-8bcd-4d92-acf0-0e851269a8bf" alt=""><figcaption><p>OP8216-32-3 front view</p></figcaption></figure>

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FxK5Nbl1E1ilqu5P5TCxL%2Fimage.png?alt=media&amp;token=4110b07c-722e-4713-933a-cbc62a942cb7" alt=""><figcaption><p>OP8216-32-3 rear view</p></figcaption></figure>

* The configuration includes **two (2)** 5 ft (1.5 m) **DB37 male-to-male cables**.

## Specifications <a href="#specifications" id="specifications"></a>

These are **specifications** relative to the **OP8216 connection interface only**.&#x20;

<table data-search="false"><thead><tr><th width="374">Specification</th><th>Description</th></tr></thead><tbody><tr><td><strong>Receiver type</strong></td><td>AFBR-2624Z PIN diode</td></tr><tr><td><strong>Transmitter type</strong></td><td>AFBR-1624Z 650 nm wavelength</td></tr><tr><td><strong>Connector type</strong></td><td>Avago’s Versatile Link family</td></tr><tr><td><strong>Maximum Tx/Rx frequency</strong></td><td><ul><li><strong>50 Mbps</strong> when connected to I/O modules OP5351, OP5352, and OP5367.</li><li><strong>10 Mbps</strong> when connected to I/O  modules OP5353 and OP5360.</li><li><strong>2 Mbps</strong> when connected to I/O module OP5369.</li></ul></td></tr><tr><td><strong>Minimum Tx pulse width</strong></td><td>20 ns</td></tr><tr><td><strong>Transmitter input electrical signal</strong></td><td>TTL-level compatible +3.3 V or +5 V.</td></tr><tr><td><strong>Receiver output electrical signal</strong></td><td>TTL-level compatible +5 V.</td></tr><tr><td><strong>External power supply</strong></td><td>12 VDC (±20%) 10 W is required  on  PCB connector, <a href="#j1-power-connector-pin-assignment">see below</a>).</td></tr></tbody></table>

## Channel description <a href="#channel-description" id="channel-description"></a>

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FzVomu2QrXY1NlsVxuHmZ%2Fimage.png?alt=media&amp;token=0acd6403-f1f5-40f0-8113-85217027d257" alt=""><figcaption></figcaption></figure>

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FZcqmZApHh68VizNxImO4%2Fimage.png?alt=media&amp;token=42b7fe13-75e4-4f07-b108-2216d1cd8017" alt=""><figcaption></figcaption></figure>

## Example calculation for optical power budget <a href="#example-calculation-for-optical-power-budget" id="example-calculation-for-optical-power-budget"></a>

To ensure that the OP8216 is compatible with different equipment and fiber-optic setups, an optical power budget must be established and calculated.

An optical power budget involves knowing the following:

* Fiber optic link distance.
* Fiber optic link attenuation and loss factor.&#x20;
* Connectors and amplifiers throughout the fiber optic link.
* Receiver sensitivity.
* Transmitter power.

For the OP8216, the transmitter has an optical output power of -4.5 dBm (min) to +2 dBm (max) \[for 1 mm POF[^1]].

The receiver has a sensitivity of -22 dBm to +2 dBm.

For 1 mm POF, worst-case attenuation can be estimated to be 0.27 dB/m from -40 to +85°C at 650 nm.

These numbers can be used to present an example of an optical power budget, where the OP8216 transmitter is connected to the OP8216 receiver through a 50 m, 1 mm POF link.&#x20;

Assuming there are no connectors or amplifiers, and that we are using a 50m fiber optic link between the OP8216 transmitter and receiver, we can calculate:

0.27 dB/m × 50 m = 13.5 dB losses through 1mm POF.

-4.5 dBm - 13.5 dB = -18 dBm at the receiver.  -18 dBm is within the receiver sensitivity specification, so the link will work properly.

We can thus confirm that this example 50 m link would be compatible with the OP8216 transmitter and receiver.

{% hint style="info" %}
Presented values are used as an **example calculation only**.  Please **replace values with measured or known values for your specific application**.
{% endhint %}

## DB37 pin assignments <a href="#db37-pins-assignment" id="db37-pins-assignment"></a>

{% columns %}
{% column width="75%" %}

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FotDQ5NksCaB2sPALw0Ek%2Fimage.png?alt=media&amp;token=a51e634c-0424-481e-960c-b192ab8c0a8e" alt=""><figcaption><p>OP8616 16-channel output (Tx)</p></figcaption></figure>

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FAsi1AH5Kx2ipgxLtNb40%2Fimage.png?alt=media&amp;token=a9244ef2-3e3e-42e0-9518-3f3ec654588f" alt=""><figcaption><p>OP8616 16-channel input (Rx)</p></figcaption></figure>

{% endcolumn %}

{% column width="25%" %}

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FGvCj1trWbXub3yo92Ua5%2Fimage.png?alt=media&amp;token=c7242545-3b67-4e80-a41a-edbbdae8e190" alt=""><figcaption><p>OP8216 DB37 pin assignments</p></figcaption></figure>
{% endcolumn %}
{% endcolumns %}

<table data-search="false"><thead><tr><th align="center">DB37 pin number</th><th align="center">Signal name</th><th align="center">Fiber-optic connector number</th><th align="center">DB37 pin number</th><th align="center">Signal name</th><th align="center">Fiber-optic connector number</th></tr></thead><tbody><tr><td align="center"><strong>1</strong></td><td align="center">CH00</td><td align="center">00</td><td align="center"><strong>20</strong></td><td align="center">GND</td><td align="center">00</td></tr><tr><td align="center"><strong>2</strong></td><td align="center">CH01</td><td align="center">01</td><td align="center"><strong>21</strong></td><td align="center">GND</td><td align="center">01</td></tr><tr><td align="center"><strong>3</strong></td><td align="center">CH02</td><td align="center">02</td><td align="center"><strong>22</strong></td><td align="center">GND</td><td align="center">02</td></tr><tr><td align="center"><strong>4</strong></td><td align="center">CH03</td><td align="center">03</td><td align="center"><strong>23</strong></td><td align="center">GND</td><td align="center">03</td></tr><tr><td align="center"><strong>5</strong></td><td align="center">CH04</td><td align="center">04</td><td align="center"><strong>24</strong></td><td align="center">GND</td><td align="center">04</td></tr><tr><td align="center"><strong>6</strong></td><td align="center">CH05</td><td align="center">05</td><td align="center"><strong>25</strong></td><td align="center">GND</td><td align="center">05</td></tr><tr><td align="center"><strong>7</strong></td><td align="center">CH06</td><td align="center">06</td><td align="center"><strong>26</strong></td><td align="center">GND</td><td align="center">06</td></tr><tr><td align="center"><strong>8</strong></td><td align="center">CH07</td><td align="center">07</td><td align="center"><strong>27</strong></td><td align="center">GND</td><td align="center">07</td></tr><tr><td align="center"><strong>9</strong></td><td align="center">CH08</td><td align="center">08</td><td align="center"><strong>28</strong></td><td align="center">GND</td><td align="center">08</td></tr><tr><td align="center"><strong>10</strong></td><td align="center">CH09</td><td align="center">09</td><td align="center"><strong>29</strong></td><td align="center">GND</td><td align="center">09</td></tr><tr><td align="center"><strong>11</strong></td><td align="center">CH10</td><td align="center">10</td><td align="center"><strong>30</strong></td><td align="center">GND</td><td align="center">10</td></tr><tr><td align="center"><strong>12</strong></td><td align="center">CH11</td><td align="center">11</td><td align="center"><strong>31</strong></td><td align="center">GND</td><td align="center">11</td></tr><tr><td align="center"><strong>13</strong></td><td align="center">CH12</td><td align="center">12</td><td align="center"><strong>32</strong></td><td align="center">GND</td><td align="center">12</td></tr><tr><td align="center"><strong>14</strong></td><td align="center">CH13</td><td align="center">13</td><td align="center"><strong>33</strong></td><td align="center">GND</td><td align="center">13</td></tr><tr><td align="center"><strong>15</strong></td><td align="center">CH14</td><td align="center">14</td><td align="center"><strong>34</strong></td><td align="center">GND</td><td align="center">14</td></tr><tr><td align="center"><strong>16</strong></td><td align="center">CH15</td><td align="center">15</td><td align="center"><strong>35</strong></td><td align="center">GND</td><td align="center">15</td></tr><tr><td align="center"><strong>17</strong></td><td align="center"> Not used</td><td align="center"> </td><td align="center"><strong>36</strong></td><td align="center">  Not used</td><td align="center"> </td></tr><tr><td align="center"><strong>18</strong></td><td align="center"><strong>+5 V (out)</strong></td><td align="center"> </td><td align="center"><strong>37</strong></td><td align="center">GND</td><td align="center"> </td></tr><tr><td align="center"><strong>19</strong></td><td align="center">  Not used</td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td></tr></tbody></table>

## J1 connector (power) - Pin assignment <a href="#j1-power-connector-pin-assignment" id="j1-power-connector-pin-assignment"></a>

| Marking                    | Signal name |
| -------------------------- | ----------- |
| “**+**” marking on PCB[^2] | **+12 V**   |
| “**-**” marking on PCB     | **GND**     |

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FNoOiLFZWrywITYJ5pNkA%2Fimage.png?alt=media&amp;token=a8bc5662-0a99-4639-b280-9d623aa832bd" alt="" width="563"><figcaption><p>J1 connector (power)</p></figcaption></figure>

## OP8216 (Tx) PCB connectors view <a href="#op8216-16-1-pcb-connector-view" id="op8216-16-1-pcb-connector-view"></a>

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FSREHoGiM8MKsba9SdixH%2Fimage.png?alt=media&amp;token=27ec164e-38e8-4fc3-b05a-49acdcef9e7c" alt=""><figcaption><p>OP8216-16 (Tx) PCB top view</p></figcaption></figure>

## OP8216 (Rx) PCB connectors view <a href="#op8216-16-2-pcb-connector-view" id="op8216-16-2-pcb-connector-view"></a>

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2Fvs0u1o5Hz8IBTdd22UKt%2Fimage.png?alt=media&amp;token=0cefb1ff-5baa-432d-a414-b92764408ef0" alt=""><figcaption><p>OP8216-16 (Rx) PCB top view</p></figcaption></figure>

[^1]: Plastic Optical Fiber

[^2]: Printed circuit board


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/accessories-conditioning-modules/accessories/op8210-connection-interface-series/op8216-db37-to-optical-fiber-interface.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
