> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/accessories-conditioning-modules/accessories/op8210-connection-interface-series/op8219-inverters-decoders-interface-panel.md).

# OP8219 Inverters /Decoders Interface Panel

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FAa55Ez7vKUwG3wTDfrzT%2FZ81_8124.png?alt=media&amp;token=c484aaf2-0e08-4ed9-b581-45b427f7e2ef" alt=""><figcaption></figcaption></figure>

## Description

The OP8219 is a signal interface unit used between the **OPAL-RT simulator** and the [**Festo LabVolt 2kW Doubly-Fed Induction Generator Research System**](https://www.festo.com/us/en/p/2-kw-dfig-simulation-system-id_PROD_DID_587300?page=0\&tab=PRODUCT).

It is used in the **OPAL-RT Rapid Control Prototyping Energy Conversion Kit RCP EC2K \[v2]**.

It is designed to be installed on a **standard 19″ rack** and uses **standard DB37 connectors**, located at the back, to connect with the **OPAL-RT simulator**.

* The **DB9 Encoder IN** **connectors** in the **front** are **compatible** with the **encoder module in the LabVolt 2 kW dynamometer (8505-A).**
* The **DB9 Inverter OUT connectors** in the **front** are compatible with the **DB9 terminals** on the **LabVolt IGBT/Chopper module (8857-1)**.

{% hint style="danger" %}
Since **the inverter DB37 connector supplies a 5 V power to the simulator Digital Out** card, **user should not connect any power supply to the simulator Digital Out connector**.
{% endhint %}

## Configurations

The **OP8219** offers a **single configuration** as described above and it includes **two (2)** 5 ft (1.5 m) **DB37 male-to-male cables** and a **12 V power supply**.

## Front interface <a href="#heading-title-text" id="heading-title-text"></a>

The OP8219 front interface consists of:

* **Two DB9 connectors** for encoder signals **coming from the LabVolt dynamometer** and identified as:
  * Encoder-1 IN
  * Encoder-2 IN
* **Two BD9 connectors** for the **PWM signals** **sent to the LabVolt IGBT Chopper/Inverter units** and identified as:
  * Inverter-1 OUT
  * Inverter-2 OUT
* **Eight digital input (DI)** connectors numbered **0 to 7** with a positive (yellow) and a negative (black) connectors.
* **Four digital output (DO)** connectors, numbered **12 to 15**, with a positive (red) and a negative (black) connectors.
* A **green LED status indicator** that **turns on** when the board is **connected to a 12 V source**.

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FwlEumuySXHtuOLSh1VSk%2Fimage.png?alt=media&amp;token=01f835e8-72a6-46ee-b127-99ad5140ef8c" alt=""><figcaption></figcaption></figure>

### Rear interface

The rear interface consists of:

* **Encoder** (**P1**) **DB37 connector**: It sends encoder signals to  the digital in (DI) of the simulator.
* **Inverter** (**P2**) **DB37 connector**: It receives the PWM pulses from the simulator.
* **12 V input connectors**: There are three form factor connectors to connect a 12 VDC source. **Only one should be used**.
* **Jumpers P4** and **P6**:  If connected, the **inverter signals** are **not inverted** when sent to the LabVolt inverters. **The jumpers must always be connected.**

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FTTln1USZaqnVNFxzqPRp%2Fimage.png?alt=media&amp;token=e5936b65-2fb6-49d6-961b-41169d88b741" alt=""><figcaption><p>OP8219 rear interface view from the top</p></figcaption></figure>

## Connect the power supply

This interface requires requires a **12 VDC power source**.

After the interface [installation](https://www.opal-rt.com/docs/accessories-conditioning-modules/accessories/op8210-connection-interface-series/install-and-connect.md), connect the **included power supply** to a **wall outlet** and to the **6-pin Molex connector** at the **rear of the interface**.

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FmiD3XQ5FzCLBdXM6TWkt%2Fimage.png?alt=media&amp;token=7f338cbe-80f5-4a62-bbed-4f1dd7e81977" alt="" width="375"><figcaption></figcaption></figure>

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2F4gdcqA2o04pu7PpGWwy5%2Fimage.png?alt=media&amp;token=a548b1dd-f30e-462d-970c-2793165a0561" alt="" width="375"><figcaption></figcaption></figure>

## Pin assignments

### Encoder connections <a href="#encoder-connection" id="encoder-connection"></a>

* **Rear**
  * **One DB37 female connector** at the rear is identified as ENCODER (P1)
* **Front**
  * **Eight banana 4 mm connectors** are identified **Digital Inputs 0 to 7** with positive connectors (yellow) and negative connectors (black).
  * **Two (2) DB9 female connectors identified** as **Encoder-1 IN** and **Encoder-2 IN**.

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FKU69vIRswm0e38Kfqr4K%2Fimage.png?alt=media&amp;token=ed9b87df-980b-4d77-9b94-df6839efdac4" alt=""><figcaption></figcaption></figure>

#### DB37 pin assignment <a href="#db37-pin-assignment" id="db37-pin-assignment"></a>

<table data-search="false"><thead><tr><th width="113.33331298828125" align="center">DB37F pin (rear)</th><th width="113.99993896484375" align="center">Simulator signal</th><th>Connector type</th><th width="147.3333740234375" align="center">OP8219 (front)</th><th width="99.9998779296875" align="center">DB37F pin (rear)</th><th width="120" align="center">Simulator signal</th><th>Connector type</th><th align="center">OP8219 (front)</th></tr></thead><tbody><tr><td align="center"><strong>1</strong></td><td align="center">+DIN00</td><td rowspan="8"><strong>Banana plug</strong><br><strong>yellow connectors</strong></td><td align="center">Digital input 0+</td><td align="center"><strong>20</strong></td><td align="center">Vuser_RTN</td><td rowspan="8"><strong>Banana plug</strong><br><strong>black connector</strong></td><td align="center">Digital input 0-</td></tr><tr><td align="center"><strong>2</strong></td><td align="center">+DIN01</td><td align="center">Digital input 1+</td><td align="center"><strong>21</strong></td><td align="center">Vuser_RTN</td><td align="center">Digital input 1-</td></tr><tr><td align="center"><strong>3</strong></td><td align="center">+DIN02</td><td align="center">Digital input 2+</td><td align="center"><strong>22</strong></td><td align="center">Vuser_RTN</td><td align="center">Digital input 2-</td></tr><tr><td align="center"><strong>4</strong></td><td align="center">+DIN03</td><td align="center">Digital input 3+</td><td align="center"><strong>23</strong></td><td align="center">Vuser_RTN</td><td align="center">Digital input 3-</td></tr><tr><td align="center"><strong>5</strong></td><td align="center">+DIN04</td><td align="center">Digital input 4+</td><td align="center"><strong>24</strong></td><td align="center">Vuser_RTN</td><td align="center">Digital input 4-</td></tr><tr><td align="center"><strong>6</strong></td><td align="center">+DIN05</td><td align="center">Digital input 5+</td><td align="center"><strong>25</strong></td><td align="center">Vuser_RTN</td><td align="center">Digital input 5-</td></tr><tr><td align="center"><strong>7</strong></td><td align="center">+DIN06</td><td align="center">Digital input 6+</td><td align="center"><strong>26</strong></td><td align="center">Vuser_RTN</td><td align="center">Digital input 6-</td></tr><tr><td align="center"><strong>8</strong></td><td align="center">+DIN07</td><td align="center">Digital input 7+</td><td align="center"><strong>27</strong></td><td align="center">Vuser_RTN</td><td align="center">Digital input 7-</td></tr><tr><td align="center"><strong>9</strong></td><td align="center">+DIN08</td><td rowspan="4"><strong>Encoder-1 IN</strong><br><strong>DB9F</strong><br><em>See pin assignment below</em></td><td align="center">Ch-A</td><td align="center"><strong>28</strong></td><td align="center">Vuser_RTN</td><td rowspan="4"><strong>Encoder-1 IN</strong><br><strong>DB9F</strong><br><em>See pin assignment below</em></td><td align="center">GND</td></tr><tr><td align="center"><strong>10</strong></td><td align="center">+DIN09</td><td align="center">Ch-B</td><td align="center"><strong>29</strong></td><td align="center">Vuser_RTN</td><td align="center">GND</td></tr><tr><td align="center"><strong>11</strong></td><td align="center">+DIN10</td><td align="center">Ch-Z</td><td align="center"><strong>30</strong></td><td align="center">Vuser_RTN</td><td align="center">GND</td></tr><tr><td align="center"><strong>12</strong></td><td align="center">+DIN11</td><td align="center">Ch-X</td><td align="center"><strong>31</strong></td><td align="center">Vuser_RTN</td><td align="center">GND</td></tr><tr><td align="center"><strong>13</strong></td><td align="center">+DIN12</td><td rowspan="4"><strong>Encoder-2 IN</strong><br><strong>DB9F</strong><br><em>See pin assignment below</em></td><td align="center">Ch-A</td><td align="center"><strong>32</strong></td><td align="center">Vuser_RTN</td><td rowspan="4"><strong>Encoder-2 IN</strong><br><strong>DB9F</strong><br><em>See pin assignment below</em></td><td align="center">GND</td></tr><tr><td align="center"><strong>14</strong></td><td align="center">+DIN13</td><td align="center">Ch-B</td><td align="center"><strong>33</strong></td><td align="center">Vuser_RTN</td><td align="center">GND</td></tr><tr><td align="center"><strong>15</strong></td><td align="center">+DIN14</td><td align="center">Ch-Z</td><td align="center"><strong>34</strong></td><td align="center">Vuser_RTN</td><td align="center">GND</td></tr><tr><td align="center"><strong>16</strong></td><td align="center">+DIN15</td><td align="center">Ch-X</td><td align="center"><strong>35</strong></td><td align="center">Vuser_RTN</td><td align="center">GND</td></tr><tr><td align="center"><strong>17</strong></td><td align="center"></td><td></td><td align="center"></td><td align="center"><strong>36</strong></td><td align="center"></td><td></td><td align="center"></td></tr><tr><td align="center"><strong>18</strong></td><td align="center"><strong>Vuser</strong></td><td></td><td align="center"></td><td align="center"><strong>37</strong></td><td align="center"><strong>Vrtn</strong></td><td></td><td align="center"></td></tr><tr><td align="center"><strong>19</strong></td><td align="center"></td><td></td><td align="center"></td><td align="center"></td><td align="center"></td><td></td><td align="center"></td></tr></tbody></table>

#### DB9 pin assignments <a href="#db9-pin-assignments" id="db9-pin-assignments"></a>

| DB9F pin number | Signal name | DB9F pin number | Signal name |
| --------------- | ----------- | --------------- | ----------- |
| **1**           | GND         | **6**           | Channel A-  |
| **2**           | Channel X+  | **7**           | Channel B-  |
| **3**           | Channel A+  | **8**           | Channel Z-  |
| **4**           | Channel B+  | **9**           | Channel X-  |
| **5**           | Channel Z+  |                 |             |

### Inverter Connection <a href="#inverter-connection" id="inverter-connection"></a>

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FKb4jjiCVmcoZnOQHImH0%2Fimage.png?alt=media&amp;token=4257a883-7a98-4619-ab30-a8d284a01e8b" alt=""><figcaption></figcaption></figure>

#### DB37 Pin Assignment <a href="#db37-pin-assignment.1" id="db37-pin-assignment.1"></a>

<table data-search="false"><thead><tr><th>DB37 pin (rear)</th><th>Simulator Signal</th><th>Connector type</th><th>Banana plug and DB9 (front)</th><th>DB37 pin (rear)</th><th>Simulator Signal</th><th></th><th>Banana plug and DB9 (front)</th></tr></thead><tbody><tr><td><strong>1</strong></td><td>+DOUT00</td><td rowspan="6"><strong>Inverter-1 OUT</strong><br><strong>DB9M</strong></td><td>Inverter 1-DB9M pin 1</td><td><strong>20</strong></td><td>Vuser_RTN</td><td rowspan="6"><strong>Inverter-1 OUT</strong><br><strong>DB9M</strong></td><td>Pin 8</td></tr><tr><td><strong>2</strong></td><td>+DOUT01</td><td>Inverter 1-DB9M pin 2</td><td><strong>21</strong></td><td>Vuser_RTN</td><td>Pin 8</td></tr><tr><td><strong>3</strong></td><td>+DOUT02</td><td>Inverter 1-DB9M pin 3</td><td><strong>22</strong></td><td>Vuser_RTN</td><td>Pin 8</td></tr><tr><td><strong>4</strong></td><td>+DOUT03</td><td>Inverter 1-DB9M pin 4</td><td><strong>23</strong></td><td>Vuser_RTN</td><td>Pin 8</td></tr><tr><td><strong>5</strong></td><td>+DOUT04</td><td>Inverter 1-DB9M pin 5</td><td><strong>24</strong></td><td>Vuser_RTN</td><td>Pin 8</td></tr><tr><td><strong>6</strong></td><td>+DOUT05</td><td>Inverter 1-DB9M pin 6</td><td><strong>25</strong></td><td>Vuser_RTN</td><td>Pin 8</td></tr><tr><td><strong>7</strong></td><td>+DOUT06</td><td rowspan="6"><strong>Inverter-2 OUT</strong><br><strong>DB9M</strong></td><td>Inverter 2-DB9M pin 1</td><td><strong>26</strong></td><td>Vuser_RTN</td><td rowspan="6"><strong>Banana plug</strong><br><strong>black connectors</strong></td><td>Pin 8</td></tr><tr><td><strong>8</strong></td><td>+DOUT07</td><td>Inverter 2-DB9M pin 2</td><td><strong>27</strong></td><td>Vuser_RTN</td><td>Pin 8</td></tr><tr><td><strong>9</strong></td><td>+DOUT08</td><td>Inverter 2-DB9M pin 3</td><td><strong>28</strong></td><td>Vuser_RTN</td><td>Pin 8</td></tr><tr><td><strong>10</strong></td><td>+DOUT09</td><td>Inverter 2-DB9M pin 4</td><td><strong>29</strong></td><td>Vuser_RTN</td><td>Pin 8</td></tr><tr><td><strong>11</strong></td><td>+DOUT10</td><td>Inverter 2-DB9M pin 5</td><td><strong>30</strong></td><td>Vuser_RTN</td><td>Pin 8</td></tr><tr><td><strong>12</strong></td><td>+DOUT11</td><td>Inverter 2-DB9M pin 6</td><td><strong>31</strong></td><td>Vuser_RTN</td><td>Pin 8</td></tr><tr><td><strong>13</strong></td><td>+DOUT12</td><td rowspan="4"><strong>Banana plug</strong><br><strong>red connectors</strong></td><td>DOUT 12+</td><td><strong>32</strong></td><td>Vuser_RTN</td><td rowspan="4"><strong>ana plug</strong><br><strong>black connectors</strong></td><td>DOUT 12-</td></tr><tr><td><strong>14</strong></td><td>+DOUT13</td><td>DOUT 13+</td><td><strong>33</strong></td><td>Vuser_RTN</td><td>DOUT 13-</td></tr><tr><td><strong>15</strong></td><td>+DOUT14</td><td>DOUT 14+</td><td><strong>34</strong></td><td>Vuser_RTN</td><td>DOUT 14-</td></tr><tr><td><strong>16</strong></td><td>+DOUT15</td><td>DOUT 15+</td><td><strong>35</strong></td><td>Vuser_RTN</td><td>DOUT 15-</td></tr><tr><td><strong>17</strong></td><td>N/C</td><td></td><td>N/C</td><td><strong>36</strong></td><td>N/C</td><td></td><td>N/C</td></tr><tr><td><strong>18</strong></td><td><strong>Vuser (5 V)</strong></td><td></td><td>N/C</td><td><strong>37</strong></td><td><strong>Vrtn</strong></td><td></td><td>N/C</td></tr><tr><td><strong>19</strong></td><td>N/C</td><td></td><td>N/C</td><td> </td><td> </td><td></td><td> </td></tr></tbody></table>

{% hint style="danger" %}
**The OP8219 powers the simulator Digital Out card with 5V power supply at pin 18**, so the user do not need to power the simulator digital out card using external power supply. If the user powers the digital out card with voltage higher than 5 V, there is a chance that the digital buffer IC in the OP8219 get damaged. Thus, **it is not recommended to power the simulator digital out card by external power supply**.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/accessories-conditioning-modules/accessories/op8210-connection-interface-series/op8219-inverters-decoders-interface-panel.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
