> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/accessories-conditioning-modules/i-o-conditioning-modules/op8e04-high-input-voltage-module.md).

# OP8E04 High Input Voltage Module

The **OP8E04** module provides four adjustable gains to scale four (4) high-voltage input signals, from a maximum of ±600V (DC or peak) to ±16V, an amplitude that is compatible with the A/D converter voltage levels of OPAL-Rt  HIL/RCP platforms (for example OP5340 and OP5342).

## Features <a href="#features" id="features"></a>

* 4 channels
* 4 selectable gains for scaling signals from ranges ±100V, ±200V, ±400V, ±600V to ±16V
* Individual gain selection
* ±18 V power supply status monitoring

## Board layout <a href="#board-layout" id="board-layout"></a>

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FGlr32iPyfraWMgv0VLCN%2Fimage.png?alt=media&amp;token=42c68400-10a3-4522-9d9d-5d564e2241c0" alt=""><figcaption><p><strong>OP8E04 - Top View</strong></p></figcaption></figure>

## Channel description <a href="#channel-description" id="channel-description"></a>

The electrical circuit of each channel is represented by the figure below.

Each channel on the board is equipped with two rotary screws that allow you to set the maximum input voltage.

The circuit attenuates the high-voltage input signal according to the gain selected and brings the signal down to a ±18V signal, using +18V and -18V DC sources

The module also provides status monitoring of the ±18 V power supply.

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FOknrX0PLBzTmzP9wiYhf%2Fimage.png?alt=media&amp;token=0d1281de-c294-4972-aac0-a5d58087b5d5" alt=""><figcaption></figcaption></figure>

The module can also be used with no scaling (See the section Voltage Range Selection below).

The output signal of the module, which gets connected to the simulator's A/D converter via the DB37 connector of the carrier, is isolated from the simulator by a 499 Ohm resistor.

### Typical application diagrams <a href="#typical-application-diagrams" id="typical-application-diagrams"></a>

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2F1amTECYEWQm2SbU60KDZ%2Fimage.png?alt=media&amp;token=341d62eb-4c4a-4362-a3c6-0d5ea432c598" alt=""><figcaption></figcaption></figure>

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FIao0hBw0foadw50o0Vfh%2Fimage.png?alt=media&amp;token=5f8e922f-b36d-47eb-9f3f-e625dad64df3" alt=""><figcaption></figcaption></figure>

### Voltage range selection <a href="#voltage-range-selection" id="voltage-range-selection"></a>

Screws must be in the correct positions to set the appropriate voltage ranges.

The following table provides the positions according to their voltage ranges:

<table><thead><tr><th>Mezzanine Mode Selection Mode</th><th width="129.79998779296875">SW1 Position</th><th width="129.7999267578125">SW2 Position</th><th></th></tr></thead><tbody><tr><td><strong>16 V default</strong></td><td>C</td><td>C</td><td><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FWryBGskN71BdaySZEmau%2Fimage.png?alt=media&amp;token=7fedd35f-e003-46cb-9378-51d18b90bbf1" alt="" data-size="original"></td></tr><tr><td><strong>±100 V</strong></td><td>2</td><td>C</td><td><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FrOhzDs6Gt6o1H1iJNy27%2Fimage.png?alt=media&amp;token=d8680f67-c202-41a5-80cd-12e7e391e094" alt="" data-size="original"></td></tr><tr><td><strong>±200 V</strong></td><td>1</td><td>C</td><td><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2Fek2iGwzaezhy65nhNbdZ%2Fimage.png?alt=media&amp;token=867319e7-33cf-4d84-ad6e-e72e66387fdb" alt="" data-size="original"></td></tr><tr><td><strong>±400 V</strong></td><td>C</td><td>2</td><td><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FZNHmegu8QIGpPWK4wQcn%2Fimage.png?alt=media&amp;token=4e538179-a1d9-4e85-ac80-f3b8d90f907e" alt="" data-size="original"></td></tr><tr><td><strong>±600 V</strong></td><td>C</td><td>1</td><td><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FMNT4faEqUhZJJUgJK1Ye%2Fimage.png?alt=media&amp;token=9e151237-7e43-49c5-a3f4-fa2984a40641" alt="" data-size="original"></td></tr></tbody></table>

### Model gain selection <a href="#model-gain-selection" id="model-gain-selection"></a>

Because the OP8E04 scales the input signals to ±16V, it is necessary to scale the values back to their high-voltage range in the model to ensure that the model represents the proper/real amplitudes.

The table below gives the gain value for each range.

| Input Range | BW (-3dB) | Gain to use in the model |
| ----------- | --------- | ------------------------ |
| **± 100V**  | ≈ 30Khz   | 0.16                     |
| **± 200V**  | ≈ 45Khz   | 0.08                     |
| **± 400V**  | ≈ 70Khz   | 0.04                     |
| **± 600V**  | ≈ 85Khz   | 0.026                    |

## Pin assignment <a href="#pin-assignment" id="pin-assignment"></a>

Refer to the [OP8E00 Modules Pin Assignment](https://www.opal-rt.com/docs/accessories-conditioning-modules/i-o-conditioning-modules/op8e00-conditioning-modules-general-information/modules-pin-assignment.md) table.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/accessories-conditioning-modules/i-o-conditioning-modules/op8e04-high-input-voltage-module.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
