> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/accessories-conditioning-modules/i-o-conditioning-modules/op8e09-input-voltage-amplifier-global-isolation.md).

# OP8E09 Input Voltage Amplifier - Global Isolation

The **OP8E09** module is designed as a buffer amplifier for four (4) low-voltage inputs signals coming from the unit under test. It also provides global isolation between the unit under test and the simulator.

## Features <a href="#features" id="features"></a>

* 4 channels
* Global isolation
* Individually configurable gain
* Maximum input range ±16V

## Board layout <a href="#board-layout" id="board-layout"></a>

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FT0khGksPjrFULRgdKhpT%2Fimage.png?alt=media&amp;token=29d387e6-af37-4722-b822-29eebf42ee6e" alt=""><figcaption><p><strong>OP8E09 - Top view</strong></p></figcaption></figure>

## Channel description <a href="#channel-description" id="channel-description"></a>

The gain of each channel can be increased to reach the full ± 16V output range of the OP5340 mezzanine of the simulator by using resistors to adjust R-optional.&#x20;

### Resistor settings <a href="#resistor-settings" id="resistor-settings"></a>

An R-optional socket is available for each channel, as shown below. The following table gives with commonly used gains and resistor values to select appropriate resistors.

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2F4dc1DbrvdZhTK6KUpKYf%2Fimage.png?alt=media&amp;token=c7763451-7741-41ec-8249-1ef2d9fc8ef2" alt=""><figcaption></figcaption></figure>

<table data-search="false"><thead><tr><th>Desired Gain (V/V)</th><th>RG (Ω)</th><th>Nearest 1% RG (Ω)</th></tr></thead><tbody><tr><td><strong>1</strong></td><td>NC</td><td>NC</td></tr><tr><td><strong>2</strong></td><td>50.00k</td><td>49.9k</td></tr><tr><td><strong>5</strong></td><td>12.50k</td><td>12.4k</td></tr><tr><td><strong>10</strong></td><td>5.556k</td><td>5.62k</td></tr><tr><td><strong>20</strong></td><td>2.632k</td><td>2.61k</td></tr><tr><td><strong>50</strong></td><td>1.02k</td><td>1.02k</td></tr><tr><td><strong>100</strong></td><td>505.1k</td><td>511</td></tr><tr><td><strong>200</strong></td><td>251.3</td><td>249</td></tr></tbody></table>

With the numbers above, by installing, for example, a 5.62KΩ resistor on the R-optional socket, you change the gain from 1 to 10. A ±1.5V input signal will then be seen as a ±15V signal.

### Maximum frequency <a href="#maximum-frequency" id="maximum-frequency"></a>

The maximum frequency without slew-rate induced distortion is 50KHz

<figure><img src="https://609051844-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FGba4ytXQss1VNonuRAzM%2Fuploads%2FsDRaisxkVmaU7ZkMxYOR%2Fimage.png?alt=media&amp;token=ede514a1-31b5-4b0a-8579-ee3e8222e1fa" alt=""><figcaption></figcaption></figure>

## Pin assignment <a href="#pin-assignment" id="pin-assignment"></a>

Refer to the [OP8E00 Modules Pin Assignment](https://www.opal-rt.com/docs/accessories-conditioning-modules/i-o-conditioning-modules/op8e00-conditioning-modules-general-information/modules-pin-assignment.md) table.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/accessories-conditioning-modules/i-o-conditioning-modules/op8e09-input-voltage-amplifier-global-isolation.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
