> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/cmde-add-on/model-and-simulation/configure-devices-within-a-ring.md).

# Configure Devices within a Ring

Before deploying the project, the **CMDE Add‑On** must be configured with a [Hardware Configuration](https://www.opal-rt.com/docs/cmde-add-on/hardware-configurations-reference/default-hardware-configurations.md) that defines the target FPGA board(s) and the available firmware features.

## Enable the desired number of devices

Expand the CMDE Add-On and select the **Ring page**. Then enable the desired amount of devices.&#x20;

<figure><img src="https://2869406741-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fgtd2gZ5PvjsRaV45Czvu%2Fuploads%2FS0uJl9Rqa985VEqgwUsS%2Fimage.png?alt=media&amp;token=7de9d8a7-c90a-480e-93ff-20b193f4c36d" alt=""><figcaption></figcaption></figure>

A [**Device section**](https://www.opal-rt.com/docs/cmde-add-on/model-and-simulation/configure-devices-within-a-ring/device-section.md) is automatically added to the configuration tree for each enabled device.

Save the system definition and close it.

## Add and Connect Simulation Models with the CMDE Add-On

Some default hardware configurations (e.g., *1xRing\_25xBQ79XXX\_7822R*) support multiple device types and include corresponding models based on the selected device. The connections between these models and the CMDE Add-On can be created automatically.&#x20;

Enable the desired amount of devices. Ensure the **Include Simulation** Models is checked.

<figure><img src="https://2869406741-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fgtd2gZ5PvjsRaV45Czvu%2Fuploads%2F2tWYLl9jBIDumovJgtCD%2Fimage.png?alt=media&amp;token=bbaf39e8-3332-4554-bc2a-5dfeee131255" alt=""><figcaption></figcaption></figure>

A corresponding model is created in the **Models** section of the System Definition tree for each enabled device.

### **Make the connections**

1. On the ring page click **Connect To Simulation Models** and wait for the connections to be done.
2. Click **Configure Mappings** to open the **System Configuration Mappings** window and confirm the connections made.

<figure><img src="https://2869406741-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fgtd2gZ5PvjsRaV45Czvu%2Fuploads%2FL5G3k4zA8ji44BVVLFXH%2Fimage.png?alt=media&amp;token=619962b2-2a38-40e5-9cbb-1168ec549fa7" alt=""><figcaption></figcaption></figure>

3. Save the system definition and close it.

The System Definition screen should display the connections made as well.

<figure><img src="https://2869406741-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fgtd2gZ5PvjsRaV45Czvu%2Fuploads%2FVhl3fYMQ5aM7KNTnOcMx%2Fimage.png?alt=media&amp;token=b67888f3-660b-4799-b530-dcc707f76538" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/cmde-add-on/model-and-simulation/configure-devices-within-a-ring.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
