> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/courseware/electric-courseware/electric-motor-drives/brushed-dc-motor-dcm-drive/exercises.md).

# Exercises

After completing the following series of exercises, the student will understand the characterization and control of a DC motor.\
Real-time simulation results are shown in the laboratory panel.

## Parameters Identification <a href="#parameters-identification" id="parameters-identification"></a>

### Back-emf Constant <a href="#back-emf-constant" id="back-emf-constant"></a>

1. Open the model with the default settings.
2. Gradually apply a field voltage of **460 V** for the DC machine.
3. Gradually apply a field voltage of **460 V** for the DC motor under test.
4. Connect <mark style="color:$danger;">**K1**</mark> as shown in figure 10.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FZ5yiIELBXYOOHqgDoqwk%2Fimage.png?alt=media&amp;token=7508415e-4269-4b63-8b9f-069a3e4941dd" alt=""><figcaption><p><strong>Figure 10</strong>: DC Machine Armature Connected to the Inverter</p></figcaption></figure>

5. Apply different voltage values and fill out the following table Speed and Voltage Values for the Determination of Back-emf Constant below.

<table data-search="false"><thead><tr><th>Applied Voltage (V)</th><th>Armature voltage of MUT (V)</th><th>Speed of MUT (rpm)</th></tr></thead><tbody><tr><td><strong>0</strong></td><td></td><td></td></tr><tr><td><strong>46</strong></td><td></td><td></td></tr><tr><td><strong>92</strong></td><td></td><td></td></tr><tr><td><strong>138</strong></td><td></td><td></td></tr><tr><td><strong>184</strong></td><td></td><td></td></tr><tr><td><strong>230</strong></td><td></td><td></td></tr><tr><td><strong>276</strong></td><td></td><td></td></tr><tr><td><strong>322</strong></td><td></td><td></td></tr><tr><td><strong>368</strong></td><td></td><td></td></tr><tr><td><strong>414</strong></td><td></td><td></td></tr><tr><td><strong>460</strong></td><td></td><td></td></tr></tbody></table>

6. Plot the speed values (x-axis) vs armature voltage (y-axis).
   * Show your graph.
   * Find the slope of the plotted line.
   * What is the value of the back-emf constant in V/rpm?
   * What is the value of the back-emf constant in V.s/rad?
   * Compare the estimated back-emf constant with the value of [Parameters of the DC Motor under test table](https://www.opal-rt.com/docs/courseware/electric-courseware/electric-motor-drives/brushed-dc-motor-dcm-drive/panels-overview.md#table-6-parameters-of-the-dc-motor-under-test).\
     What do you observe?

{% hint style="info" %}
1 rad/s = 9.5493 rpm.
{% endhint %}

### Armature resistance <a href="#armature-resistance" id="armature-resistance"></a>

1. Disconnect <mark style="color:$danger;">**K1**</mark>, then set the applied voltage to **0 V**.
2. Connect <mark style="color:$danger;">**K2**</mark> as shown in figure 11.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2Fl4TJeKSV3q6gYPtXp6Nk%2Fimage.png?alt=media&amp;token=616a87a5-b19b-494a-9367-06ff104274a2" alt=""><figcaption><p><strong>Figure 11</strong>: MUT Armature Connected to the Inverter</p></figcaption></figure>

3. Connect <mark style="color:$danger;">**K3**</mark> as shown in figure 12.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FXjcKq7nXMHCfrrYYM0Dr%2Fimage.png?alt=media&amp;token=a24b5786-64a9-4377-8443-c15ad60650a4" alt=""><figcaption><p><strong>Figure 12</strong>: Connection of the DCM Resistive Load</p></figcaption></figure>

4. Apply different voltage values and fill out Speed, Voltage, and Current Values for the Determination of *R*<sub>*a table*</sub> 11.\
   The values of *V*<sub>*a*</sub>, *I*<sub>*a*</sub>*,* and *N* can be directly taken from the displays under the Tab “**Parameters Identification Ra**”.

<table data-search="false"><thead><tr><th>Applied Voltage (V)</th><th>Va (A)</th><th>Ia (A)</th><th>N (rpm)</th><th>Ra (Ω)</th></tr></thead><tbody><tr><td><strong>0</strong></td><td></td><td></td><td></td><td></td></tr><tr><td><strong>46</strong></td><td></td><td></td><td></td><td></td></tr><tr><td><strong>92</strong></td><td></td><td></td><td></td><td></td></tr><tr><td><strong>138</strong></td><td></td><td></td><td></td><td></td></tr><tr><td><strong>184</strong></td><td></td><td></td><td></td><td></td></tr><tr><td><strong>230</strong></td><td></td><td></td><td></td><td></td></tr><tr><td><strong>276</strong></td><td></td><td></td><td></td><td></td></tr><tr><td><strong>322</strong></td><td></td><td></td><td></td><td></td></tr><tr><td><strong>368</strong></td><td></td><td></td><td></td><td></td></tr><tr><td><strong>400</strong></td><td></td><td></td><td></td><td></td></tr><tr><td><strong>460</strong></td><td></td><td></td><td></td><td></td></tr></tbody></table>

4. From table 11, compute the average value of the armature resistance.
5. Compare the obtained result for armature resistance with the value of [**Parameters of the DC Motor under test table**](https://www.opal-rt.com/docs/courseware/electric-courseware/electric-motor-drives/brushed-dc-motor-dcm-drive/panels-overview.md#table-6-parameters-of-the-dc-motor-under-test).
6. How accurate is the estimation? Explain.

{% hint style="info" icon="lightbulb-on" %}
Hint: Use [equation (4) to compute R<sub>a</sub>](https://www.opal-rt.com/docs/courseware/electric-courseware/electric-motor-drives/brushed-dc-motor-dcm-drive/virtual-test-bench-overview.md#determination-of-the-armature-resistance-ra) with the back-emf constant \[V/rpm] found earlier.
{% endhint %}

### Armature Inductance  <a href="#armature-inductance" id="armature-inductance"></a>

1. Disconnect <mark style="color:$danger;">**K3**</mark>, then slowly decrease the applied voltage to **0 V**.
2. Block the rotor as shown in figure 13.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FcBjtKbVnkQhbiWG9V0Kr%2Fimage.png?alt=media&amp;token=78fca870-9627-45b2-9a96-452fd45748a6" alt=""><figcaption><p><strong>Figure 13</strong>: Activation of Blocked Rotor Test</p></figcaption></figure>

3. Apply a **voltage source value** of **40 V**.
   * What is the armature voltage of the DC machine?
   * What is the armature voltage of the MUT?
4. Observe the waveform under the “Parameters Identification *L*<sub>*a*</sub>” tab.
5. Use the zoom-in capability of the graph and the available cursors to measure two values of armature current at the linear part of the graph.
   * Compute *L*<sub>*a*</sub> using [**equation (6)**](https://www.opal-rt.com/docs/courseware/electric-courseware/electric-motor-drives/brushed-dc-motor-dcm-drive/virtual-test-bench-overview.md#determination-of-the-armature-inductance-la).
   * Compare the obtained result of armature inductance to the value of [**Parameters of the DC Motor under test table**](https://www.opal-rt.com/docs/courseware/electric-courseware/electric-motor-drives/brushed-dc-motor-dcm-drive/panels-overview.md#table-6-parameters-of-the-dc-motor-under-test).
   * How accurate is the estimation? Explain.

### Friction Parameters <a href="#friction-parameters" id="friction-parameters"></a>

1. Decrease the applied voltage to **0 V**.
2. Deactivate the “Block Rotor” button. If a fault occurs, click on the “Reset” button.
3. Go to the “Parameters Identification Tf & B” tab.
4. Fill out Speed, Current, and Torque Values for Friction Parameters’ Determination table 12 by varying the applied voltage.

<table data-search="false"><thead><tr><th>Applied Voltage (V)</th><th>Speed (rad/s)</th><th>Ia (A)</th><th>Tem (N.m)</th></tr></thead><tbody><tr><td><strong>0</strong></td><td></td><td></td><td></td></tr><tr><td><strong>46</strong></td><td></td><td></td><td></td></tr><tr><td><strong>92</strong></td><td></td><td></td><td></td></tr><tr><td><strong>138</strong></td><td></td><td></td><td></td></tr><tr><td><strong>184</strong></td><td></td><td></td><td></td></tr><tr><td><strong>230</strong></td><td></td><td></td><td></td></tr><tr><td><strong>276</strong></td><td></td><td></td><td></td></tr><tr><td><strong>322</strong></td><td></td><td></td><td></td></tr><tr><td><strong>368</strong></td><td></td><td></td><td></td></tr><tr><td><strong>400</strong></td><td></td><td></td><td></td></tr><tr><td><strong>460</strong></td><td></td><td></td><td></td></tr></tbody></table>

5. Based on table 12, plot the speed (x-axis) vs *T*<sub>*em*</sub> (y-axis).
   * Show your graph.
   * Find the slope of the line and the y-intercept.
   * What is the value of the friction torque *T*<sub>*f*</sub>?
   * What is the value of the friction coefficient *B*?
   * Compare the obtained *T*<sub>*f*</sub> to the total friction of [**table 9**](https://www.opal-rt.com/docs/courseware/electric-courseware/electric-motor-drives/brushed-dc-motor-dcm-drive/panels-overview.md#table-9-test-bench-mechanical-parameters).
6. Based on table 12, plot the current (x-axis) vs *T*<sub>*em*</sub> (y-axis).
   * Show your graph.
   * What is the slope of the line?

* Explain your result based on [**equation (9)**](https://www.opal-rt.com/docs/courseware/electric-courseware/electric-motor-drives/brushed-dc-motor-dcm-drive/virtual-test-bench-overview.md#determination-of-the-friction-torque-tf-and-friction-coefficient-b).

### Moment of Inertia <a href="#moment-of-inertia" id="moment-of-inertia"></a>

1. Slowly decrease the applied voltage to **0 V**.
2. Go to the “Parameters Identification J” tab.
3. Apply a **voltage source value** of **100 V**.
   * What is the armature current of the MUT?\
     This value corresponds to *i*<sub>*a*</sub> (0<sup>-</sup>) in [**equation (12)**](https://www.opal-rt.com/docs/courseware/electric-courseware/electric-motor-drives/brushed-dc-motor-dcm-drive/virtual-test-bench-overview.md#determination-of-the-moment-of-inertia-j).
4. Increase the Trigger Level to **340 rpm**, then activate the Apply Trigger for Acquisition, as presented in figure 14 below.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2F3IxAzF2Uf4SsFZuSI44y%2Fimage.png?alt=media&amp;token=f03a65c0-dfe8-4c04-befb-f1f26951d435" alt=""><figcaption><p><strong>Figure 14</strong>: Activation of Trigger Level</p></figcaption></figure>

5. Disconnect <mark style="color:$danger;">**K2**</mark> and observe the waveform of the decreasing speed.
6. Use the zoom-in capability of the graph and the available cursors to measure two speed values at the very beginning of the decreasing slope.
   * Compute the slope of the line.
   * Compute the inertia using [**equation (12)**](https://www.opal-rt.com/docs/courseware/electric-courseware/electric-motor-drives/brushed-dc-motor-dcm-drive/virtual-test-bench-overview.md#determination-of-the-moment-of-inertia-j).
   * Compare the obtained inertia with the value of [**table 9**](https://www.opal-rt.com/docs/courseware/electric-courseware/electric-motor-drives/brushed-dc-motor-dcm-drive/panels-overview.md#table-9-test-bench-mechanical-parameters).

## Current control <a href="#current-control" id="current-control"></a>

1. Deactivate the Apply Trigger for Acquisition
2. Bring the voltage source to 0 V, then connect <mark style="color:$danger;">**K2**</mark>.
3. Activate <mark style="color:$danger;">**K3**</mark>, the “Connect Load” button. Then reduce the load resistance to 15 ohms.
4. Go to “Current Control” tab and activate the current control as shown in figure 15.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FZ7b2tUgPA5IdzHVudBlF%2Fimage.png?alt=media&amp;token=65ecf408-69e3-4f84-8ef8-f4273905ce7a" alt=""><figcaption><p><em><strong>Figure 15</strong>: Activation of Current Control</em></p></figcaption></figure>

5. Apply a **reference current** of **10 A**.
   * Does the measured current follow the reference?
   * What is the speed of the DC motor under test?
   * What is the armature voltage of the MUT?
6. Increase the reference current to **15 A**.
   * Does the measured current follow the reference?
   * What is the speed of the DC motor under test?
   * What is the armature voltage of the MUT?
7. Increase the reference current to **20 A**.
   * Does the measured current follow the reference?
   * What is the speed of the DC motor under test?
   * What is the armature voltage of the MUT?
8. Increase the reference current to **25 A**.
   * Does the measured current follow the reference?
   * What is the speed of the DC motor under test?
   * What is the armature voltage of the MUT?
9. How do the speed and voltage of the MUT change with increase of reference current? Explain your observation.

{% hint style="info" %}
Show results to support your answers regarding the measured current following the reference.
{% endhint %}

## Speed control <a href="#speed-control" id="speed-control"></a>

1. Decrease the reference current to 0 A.
2. Go to the “Speed Control” tab and activate the speed control as shown in figure 16.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FZokzwdlaoXXFayfepodx%2Fimage.png?alt=media&amp;token=b3b44fc2-a957-4af7-9cfc-fcc680a63fef" alt=""><figcaption><p><strong>Figure 16</strong>: Activation of Speed Control</p></figcaption></figure>

3. Apply a **reference speed** of **200 rpm**.
   * Does the measured speed follow the reference?
   * Does the measured current follow the reference?
   * What is the armature voltage of the MUT?
   * What is the armature voltage of the DCM?
4. Increase the reference speed to **400 rpm**.
   * Does the measured speed follow the reference?
   * Does the measured current follow the reference?
   * What is the armature voltage of the MUT?
   * What is the armature voltage of the DCM?
5. Increase the reference speed to **600 rpm**.
   * Does the measured speed follow the reference?
   * Does the measured current follow the reference?
   * What is the armature voltage of the MUT?
   * What is the armature voltage of the DCM?
6. Increase the reference speed to **800 rpm**.
   * Does the measured speed follow the reference?
   * Does the measured current follow the reference?
   * What is the armature voltage of the MUT?
   * What is the armature voltage of the DCM?
7. Increase the reference speed to **1000 rpm**.
   * Does the measured speed follow the reference?
   * Does the measured current follow the reference?
   * What is the armature voltage of the MUT?
   * What is the armature voltage of the DCM?0
8. How do the armature voltages of the MUT and the DCM change with increase of reference speed? Explain your observation.

{% hint style="info" %}
Show results to support your answers regarding the measured current and speed values following the references.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/courseware/electric-courseware/electric-motor-drives/brushed-dc-motor-dcm-drive/exercises.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
