> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/courseware/electric-courseware/fundamentals-of-electrical-engineering/panels-overview.md).

# Panels Overview

## Introduction

The **Electrotechnique** model file, located in the folder **OP1110 - Fundamentals of Electrical Engineering Courseware,** is **FE\_Electrotechnique-version.zip**

The tabs constitute the interactive interface of the virtual laboratory, which includes access to settings, measurement displays, and the electrical diagram. This interface allows users to manually control the virtual laboratory by modifying network and protection settings, assembling the electrical diagram, and observing measurements.

The user interface screen is divided into two distinct parts. On the left side of the screen, there is a control panel with several sub-windows selectable by tabs:

* A **Network and Transformer sub-window** “Network and Transformer” that allows control of the operating modes and settings of power supplies, the transformer, grounding connections, and circuit breakers.
* A **Passive Loads sub-window** “Passive Loads” that enables control, adjustment, and configuration of the six passive loads.

On the right side of the screen, there is a control panel with several display sub-windows selectable by tabs:

* An **“Oscilloscope” sub-window** with interactive display settings for the respective measurement points.
* A **Measurements and Calculations sub-window** “Network and Transformer” displaying the specific topology of the ongoing experiment, measurement displays, settings, and the spectrum analyzer display.
* A **“Help” sub-window** that allows the user to understand and visualize the wiring of the ongoing experiment at any time by displaying the status of different contactors on the overall electrical diagram.

This section serves as a comprehensive reference for the features of the components present on the user interface screen.

## Transformer and circuit breaker tab

Figure 6 displays the user interface for electrical supplies in virtual laboratories. It provides interactive options to adjust the fundamental settings of power supplies, such as frequency, amplitude, and phase shift for each phase, along with buttons to enable or disable various operating modes.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FTiX70JVLcKongXiNqXfR%2Fimage.png?alt=media&amp;token=0d92a30a-4891-4a05-8929-987cc627c86c" alt=""><figcaption><p><em><strong>Figure 6:</strong> Network and Transformer tab &#x26; Passive Loads tab</em></p></figcaption></figure>

### Network <a href="#id-3.1.1-network" id="id-3.1.1-network"></a>

In the network settings, frequency, voltage, and phase can be defined using input fields or sliders. The network can be set as a single-phase network, and the phases can be defined as balanced. In case the phases are unbalanced, the voltage and phase shift of phases B and C can be independently modified. Using a button, the network can be energized.

### Transformer <a href="#id-3.1.2-transformer" id="id-3.1.2-transformer"></a>

There are three different modes for the transformer branch: short circuit, open circuit, or transformer.

### Circuit breaker <a href="#id-3.1.3-circuit-breaker" id="id-3.1.3-circuit-breaker"></a>

The rated current of the circuit breaker can be adjusted, and there are three different thermal modes as well as a choice of four magnetic modes. Three lamps indicate the status of the circuit breaker and the fault that triggered the protection. If the circuit breaker has tripped, its control needs to be reactivated.

## Control panels

<table data-search="false"><thead><tr><th width="160">Function</th><th width="139.5999755859375">Interface/
Icon</th><th>Description</th></tr></thead><tbody><tr><td><strong>Command</strong> </td><td><strong>Switches</strong> </td><td></td></tr><tr><td> <strong>A</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlqjJHVGamIytSPQN1Qb3%2Fimage.png?alt=media&amp;token=3f4aea6c-2f11-4bb7-84a2-efb15979563a" alt=""></td><td>Phase A is deactivated.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDOzt0GbdfY14L1rnuZO8%2Fimage.png?alt=media&amp;token=5d794768-584d-46ab-974b-23356c80637f" alt=""></td><td>Phase A is active.</td></tr><tr><td><strong>B</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlqjJHVGamIytSPQN1Qb3%2Fimage.png?alt=media&amp;token=3f4aea6c-2f11-4bb7-84a2-efb15979563a" alt=""></td><td>Phase B is deactivated.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDOzt0GbdfY14L1rnuZO8%2Fimage.png?alt=media&amp;token=5d794768-584d-46ab-974b-23356c80637f" alt=""></td><td>Phase B is active.</td></tr><tr><td><strong>C</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlqjJHVGamIytSPQN1Qb3%2Fimage.png?alt=media&amp;token=3f4aea6c-2f11-4bb7-84a2-efb15979563a" alt=""></td><td>Phase C is deactivated.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDOzt0GbdfY14L1rnuZO8%2Fimage.png?alt=media&amp;token=5d794768-584d-46ab-974b-23356c80637f" alt=""></td><td>Phase C is active.</td></tr><tr><td><strong>Power up</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlqjJHVGamIytSPQN1Qb3%2Fimage.png?alt=media&amp;token=3f4aea6c-2f11-4bb7-84a2-efb15979563a" alt=""></td><td>The voltage source is deactivated; the circuit is de-energized.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDOzt0GbdfY14L1rnuZO8%2Fimage.png?alt=media&amp;token=5d794768-584d-46ab-974b-23356c80637f" alt=""></td><td>The voltage source is activated; the circuit is energized.</td></tr><tr><td><strong>Phase Inversion</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlqjJHVGamIytSPQN1Qb3%2Fimage.png?alt=media&amp;token=3f4aea6c-2f11-4bb7-84a2-efb15979563a" alt=""></td><td>Phases are not inverted.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDOzt0GbdfY14L1rnuZO8%2Fimage.png?alt=media&amp;token=5d794768-584d-46ab-974b-23356c80637f" alt=""></td><td>Phases are inverted.</td></tr><tr><td><strong>Single-phase network</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlqjJHVGamIytSPQN1Qb3%2Fimage.png?alt=media&amp;token=3f4aea6c-2f11-4bb7-84a2-efb15979563a" alt=""></td><td>The voltage source is three-phase.</td></tr><tr><td></td><td> <img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDOzt0GbdfY14L1rnuZO8%2Fimage.png?alt=media&amp;token=5d794768-584d-46ab-974b-23356c80637f" alt=""></td><td>The voltage source is single-phase.</td></tr><tr><td><strong>Balanced phases</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlqjJHVGamIytSPQN1Qb3%2Fimage.png?alt=media&amp;token=3f4aea6c-2f11-4bb7-84a2-efb15979563a" alt=""></td><td>Phases are not balanced.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDOzt0GbdfY14L1rnuZO8%2Fimage.png?alt=media&amp;token=5d794768-584d-46ab-974b-23356c80637f" alt=""></td><td>Phases are balanced.</td></tr><tr><td><strong>Control</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlqjJHVGamIytSPQN1Qb3%2Fimage.png?alt=media&amp;token=3f4aea6c-2f11-4bb7-84a2-efb15979563a" alt=""></td><td>Circuit breaker control is not activated.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDOzt0GbdfY14L1rnuZO8%2Fimage.png?alt=media&amp;token=5d794768-584d-46ab-974b-23356c80637f" alt=""></td><td>Circuit breaker control is activated.</td></tr><tr><td><strong>Thermal reset</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlqjJHVGamIytSPQN1Qb3%2Fimage.png?alt=media&amp;token=3f4aea6c-2f11-4bb7-84a2-efb15979563a" alt=""></td><td>Thermal protection is not tripped.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDOzt0GbdfY14L1rnuZO8%2Fimage.png?alt=media&amp;token=5d794768-584d-46ab-974b-23356c80637f" alt=""></td><td>Thermal protection is tripped.</td></tr><tr><td><strong>No protection</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlqjJHVGamIytSPQN1Qb3%2Fimage.png?alt=media&amp;token=3f4aea6c-2f11-4bb7-84a2-efb15979563a" alt=""></td><td>The circuit is protected; the protection is activated.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDOzt0GbdfY14L1rnuZO8%2Fimage.png?alt=media&amp;token=5d794768-584d-46ab-974b-23356c80637f" alt=""></td><td>The circuit is unprotected; the protection is deactivated.</td></tr><tr><td><strong>Fuses</strong> </td><td><strong>LED indicators</strong></td><td></td></tr><tr><td><strong>Circuit breaker</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FXMiLDY930zdIxkjo95dF%2Fimage.png?alt=media&amp;token=9aa49fe8-ce8d-4e15-a037-24bb1e2c66c2" alt=""></td><td>The circuit breaker is tripped.</td></tr><tr><td><p></p><p> </p></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FufLjD7C7DrroYd7lWCeW%2Fimage.png?alt=media&amp;token=110185b6-9735-44f2-960a-f9fe284c02b7" alt=""></td><td>The circuit breaker is intact.</td></tr><tr><td><strong>Thermal</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FXMiLDY930zdIxkjo95dF%2Fimage.png?alt=media&amp;token=9aa49fe8-ce8d-4e15-a037-24bb1e2c66c2" alt=""></td><td>The thermal component of the circuit breaker is tripped.</td></tr><tr><td><p></p><p> </p></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FufLjD7C7DrroYd7lWCeW%2Fimage.png?alt=media&amp;token=110185b6-9735-44f2-960a-f9fe284c02b7" alt=""></td><td>The thermal component of the circuit breaker is intact.</td></tr><tr><td><strong>Magnetic</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FXMiLDY930zdIxkjo95dF%2Fimage.png?alt=media&amp;token=9aa49fe8-ce8d-4e15-a037-24bb1e2c66c2" alt=""></td><td>The magnetic component of the circuit breaker is tripped.</td></tr><tr><td><p></p><p> </p></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FufLjD7C7DrroYd7lWCeW%2Fimage.png?alt=media&amp;token=110185b6-9735-44f2-960a-f9fe284c02b7" alt=""></td><td>The magnetic component of the circuit breaker is intact.</td></tr></tbody></table>

### Passive loads tab&#x20;

The user interface for passive loads used in virtual laboratories is presented in Figures 4 and 5. It includes interactive adjustment devices for resistances, inductances, and capacitances for each phase, as well as buttons to enable/disable balanced coupling mode for three-phase loads. When the “Balanced Circuit” option is activated, it is not possible to adjust phases B and C. Additionally, the “Star grounded” button can be selected but is not used in this protocol.

In this tab, the circuit configuration can be chosen. If in the “Measurements and Calculations” tab the “Automatic Tab” button has been selected, the complete configuration is made automatically. There are eight different automatic configurations:

* Open circuit
* A1 + B1//C1
* A1//C1
* A + B//C
* H bridge
* A1//B1 + A2 + B2//C2
* A//B
* Short circuit

There are four different components to adjust: Z\_1\_series, Z\_1\_parallel, Z\_2\_series, and Z\_2\_parallel. In the following exercises, only Z\_1\_series and Z\_1\_parallel will be used. For each phase (A, B, C), there is an impedance (series or parallel) to adjust, and there are 8 different adjustment possibilities: Short circuit, open circuit, R, C, L, RC, RL, and RLC. Depending on the choice made, the selected value can now be entered in the corresponding window.

<table><thead><tr><th width="160">Function</th><th width="139.60003662109375">Interface</th><th>Description</th></tr></thead><tbody><tr><td><strong>Star grounded</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlqjJHVGamIytSPQN1Qb3%2Fimage.png?alt=media&amp;token=3f4aea6c-2f11-4bb7-84a2-efb15979563a" alt=""></td><td>The star point is floating.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDOzt0GbdfY14L1rnuZO8%2Fimage.png?alt=media&amp;token=5d794768-584d-46ab-974b-23356c80637f" alt=""></td><td>The star point is grounded.</td></tr><tr><td><p><strong>Balanced Circuit</strong></p><p><strong>(there is a button for each impedance)</strong></p><p> </p></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlqjJHVGamIytSPQN1Qb3%2Fimage.png?alt=media&amp;token=3f4aea6c-2f11-4bb7-84a2-efb15979563a" alt=""></td><td>The phase impedances are not balanced.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDOzt0GbdfY14L1rnuZO8%2Fimage.png?alt=media&amp;token=5d794768-584d-46ab-974b-23356c80637f" alt=""></td><td>The phase impedances are balanced.</td></tr></tbody></table>

### Measurements and calculations tab <a href="#id-3.3-measurements-and-calculations-tab-inlineextension" id="id-3.3-measurements-and-calculations-tab-inlineextension"></a>

In the “Network and Transformer” tab, the currently configured circuit is displayed. The voltage source, transformer, and passive load are visible, along with various measurements. There is a button for “Automatic tab.” When this is activated, no manual modifications can be made to the diagram.

For each element, you can choose whether it is a single-phase or three-phase circuit. In the transformer section, you can select the desired option here, which can also be done in the “Network and Transformer” tab. In the impedance section, different options can be selected, similar to the “Assembly” selection in “Passive load.” Additionally, the measurement locations are highlighted in red.

The measurements are displayed in the lower part. On one hand, there’s the Fortescue transformation of the network, and on the other hand, there are four different measurement displays. For each display, there are 20 different options to choose from, corresponding to the respective phase. The corresponding measurement points are visible in the “help” tab.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FfqqPspEftBnSF4WtBqog%2Fimage.png?alt=media&amp;token=f4b5bec3-ab3e-4574-8a23-beddf5faf272" alt=""><figcaption><p><em><strong>Figure 7:</strong> Example 1 of the user interface of the “Network and Transformer” tab</em></p></figcaption></figure>

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FA3EOcuTUBGtRIOw4PSUs%2Fimage.png?alt=media&amp;token=88e8dd75-1565-4f33-b955-981595e0b2f8" alt=""><figcaption><p><em><strong>Figure 8:</strong> Example 2 of the user interface of the “Network and Transformer” tab</em></p></figcaption></figure>

<table><thead><tr><th width="160">Function</th><th width="140.4000244140625">Interface</th><th>Description</th></tr></thead><tbody><tr><td><strong>Automatic tab</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlqjJHVGamIytSPQN1Qb3%2Fimage.png?alt=media&amp;token=3f4aea6c-2f11-4bb7-84a2-efb15979563a" alt=""></td><td>The configuration is not set automatically.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDOzt0GbdfY14L1rnuZO8%2Fimage.png?alt=media&amp;token=5d794768-584d-46ab-974b-23356c80637f" alt=""></td><td>The configuration is done automatically by choosing the configuration in the “Charge passive” section.</td></tr></tbody></table>

### Oscilloscope tab <a href="#id-3.4-oscilloscope-tab-inlineextension" id="id-3.4-oscilloscope-tab-inlineextension"></a>

To observe the time-domain waveforms of different signals measured in steady-state and transient conditions in the virtual laboratory, a 4-channel digital storage oscilloscope with a generic triggering system is available. It is equipped with a 4-channel spectrum analyzer and allows for adjusting measurement, phase, and gain for each channel.

The controls of the oscilloscope are as follows:

* Channel and signal selection for measurement.
* Selection of measurement signals from a predefined list.
* Individual gain adjustment for each channel.

The “Trigger” function has the following controls:

* Trigger adjustment.
* Selection of the signal source used for triggering.
* Selection of the triggering mode (Normal or Single Sweep).
* Selection of the rising or falling edge of the signal source used for triggering.
* Selection of the signal source level used for triggering.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlnbgNV1mxhW8tqhL9ye5%2Fimage.png?alt=media&amp;token=c8cdcccd-d7f0-47cf-ae8c-2e716b4b4d74" alt=""><figcaption><p><em><strong>Figure 9:</strong> User interface of the “Oscilloscope” tab</em></p></figcaption></figure>

<table><thead><tr><th width="160">Function</th><th width="140.4000244140625">Interface</th><th>Description</th></tr></thead><tbody><tr><td><strong>Reset Trig 1</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlqjJHVGamIytSPQN1Qb3%2Fimage.png?alt=media&amp;token=3f4aea6c-2f11-4bb7-84a2-efb15979563a" alt=""></td><td>The trigger is not reset.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDOzt0GbdfY14L1rnuZO8%2Fimage.png?alt=media&amp;token=5d794768-584d-46ab-974b-23356c80637f" alt=""></td><td>The trigger is reset</td></tr><tr><td><strong>Autoscale X</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlqjJHVGamIytSPQN1Qb3%2Fimage.png?alt=media&amp;token=3f4aea6c-2f11-4bb7-84a2-efb15979563a" alt=""></td><td>The X-axis scale is not adjusted automatically.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDOzt0GbdfY14L1rnuZO8%2Fimage.png?alt=media&amp;token=5d794768-584d-46ab-974b-23356c80637f" alt=""></td><td>The X-axis scale is adjusted automatically.</td></tr><tr><td><strong>Autoscale Y</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlqjJHVGamIytSPQN1Qb3%2Fimage.png?alt=media&amp;token=3f4aea6c-2f11-4bb7-84a2-efb15979563a" alt=""></td><td>The Y-axis scale is not adjusted automatically.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDOzt0GbdfY14L1rnuZO8%2Fimage.png?alt=media&amp;token=5d794768-584d-46ab-974b-23356c80637f" alt=""></td><td>The Y-axis scale is adjusted automatically.</td></tr></tbody></table>

### Help tab <a href="#id-3.5-help-tab-inlineextension" id="id-3.5-help-tab-inlineextension"></a>

The complete electrical diagram is visible in the “Help” tab. Furthermore, for each configuration, lights illuminate to indicate the current connections. This allows for visual tracking of the setup.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/courseware/electric-courseware/fundamentals-of-electrical-engineering/panels-overview.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
