> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/courseware/electric-courseware/power-electronics/ac-to-dc-rectifiers/single-phase-diode-bridge-rectifier/exercises/part-1-single-phase-diode-bridge-rectifier-resistive-load.md).

# Part 1 - Single-phase Diode Bridge Rectifier - Resistive Load

## Varying resistive load (without smoothing capacitor, C=0) <a href="#exercise-1-varying-resistive-load-without-smoothing-capacitor-c-0" id="exercise-1-varying-resistive-load-without-smoothing-capacitor-c-0"></a>

Open the Single-Phase Diode Bridge Rectifier panel, choose in the menu **Pre-Selected**: Single Phase: Varying Resistive Load without smoothing capacitor.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FVr5c7o38DreBHI0WFTNc%2Fe7864b09-f39f-4727-a94e-d7ef217f2ed7.png?alt=media&amp;token=fad7a8dd-4833-458f-9fc9-e90c93bb5bc0" alt=""><figcaption><p><strong>Figure 11</strong>: Single-Phase Diode Bridge Rectifier Panel with a Resistive Load of 16.5 ohms</p></figcaption></figure>

### Default parameters <a href="#default-parameters" id="default-parameters"></a>

* AC Source Voltage : Ve= 120 V
* Frequency: 60 Hz
* R= 16.5 Ω

Keep the AC Source Voltage to 120 V, observe the waveforms, and calculate the average output current (load current) and fill out table 4 for different values of the resistance R.

### Effect of varying resistive load

<table><thead><tr><th>R (Ω)</th><th width="80">16.5</th><th width="80">25</th><th width="80">50</th><th width="80">100</th><th width="79.996826171875">200</th></tr></thead><tbody><tr><td><strong>Average load current (A)</strong></td><td></td><td></td><td></td><td></td><td></td></tr></tbody></table>

1. Calculate the output frequency and compare it with the input frequency.
2. Compare the input current with the output current and the input voltage with the output voltage.
3. Deduce the role of the single-phase diode bridge rectifier.
4. Justify the shape of the output voltage and output current.
5. Calculate the form factor and the ripple factor.

## Varying resistive load (with smoothing capacitor) <a href="#exercise-2-varying-resistive-load-with-smoothing-capacitor" id="exercise-2-varying-resistive-load-with-smoothing-capacitor"></a>

In the panel, choose under **Pre-Selected**: Single Phase: Varying Resistive Load with smoothing capacitor.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2F8QJIwy8j400576LQPCK0%2F1ae8a86e-f154-464f-b6da-8fe3a64b7cb7.png?alt=media&amp;token=84257fef-20ea-4d44-b5f9-fd5a145b4121" alt=""><figcaption><p><strong>Figure 12</strong>: Single-Phase Diode Bridge Rectifier Panel with R=16.5 ohms and C= 470 µF</p></figcaption></figure>

Complete tables 5, 6, and 7 for different values of the smoothing capacitor.

### **Case 1**: C= **470 µF** <a href="#case-1-c-470-f" id="case-1-c-470-f"></a>

<table><thead><tr><th>R (Ω)</th><th width="80">16.5</th><th width="80">25</th><th width="79.99993896484375">50</th><th width="80">100</th><th width="80">200</th></tr></thead><tbody><tr><td><strong>The maximum peak value of output voltage (V)</strong></td><td><br><br></td><td><br><br></td><td><br><br></td><td><br><br></td><td><br><br></td></tr><tr><td><strong>The minimum peak value of output voltage (V)</strong></td><td><br><br></td><td><br><br></td><td><br><br></td><td><br><br></td><td><br><br></td></tr><tr><td><strong>Form factor</strong></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td><strong>Ripple factor</strong></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td><strong>THD of AC-source Current (%)</strong></td><td></td><td></td><td></td><td></td><td></td></tr></tbody></table>

### **Case 2**: C= **1100 µF** <a href="#case-2-c-1100-f" id="case-2-c-1100-f"></a>

<table><thead><tr><th>R (Ω)</th><th width="80">16.5</th><th width="80">25</th><th width="79.99993896484375">50</th><th width="80">100</th><th width="80">200</th></tr></thead><tbody><tr><td><strong>The maximum peak value of output voltage (V)</strong></td><td><br><br></td><td><br><br></td><td><br><br></td><td><br><br></td><td><br><br></td></tr><tr><td><strong>The minimum peak value of output voltage (V)</strong></td><td><br><br></td><td><br><br></td><td><br><br></td><td><br><br></td><td><br><br></td></tr><tr><td><strong>Form factor</strong></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td><strong>Ripple factor</strong></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td><strong>THD of AC-source Current (%)</strong></td><td></td><td></td><td></td><td></td><td></td></tr></tbody></table>

### **Case 3**: C= **0.1 F** <a href="#case-3-c-0.1-f" id="case-3-c-0.1-f"></a>

<table><thead><tr><th>R (Ω)</th><th width="80">16.5</th><th width="80">25</th><th width="79.99993896484375">50</th><th width="80">100</th><th width="80">200</th></tr></thead><tbody><tr><td><strong>The maximum peak value of output voltage (V)</strong></td><td><br><br></td><td><br><br></td><td><br><br></td><td><br><br></td><td><br><br></td></tr><tr><td><strong>The minimum peak value of output voltage (V)</strong></td><td><br><br></td><td><br><br></td><td><br><br></td><td><br><br></td><td><br><br></td></tr><tr><td><strong>Form factor</strong></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td><strong>Ripple factor</strong></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td><strong>THD of AC-source Current (%)</strong></td><td></td><td></td><td></td><td></td><td></td></tr></tbody></table>

Now, set **R to 25 Ω**.

1. Compare the values of peak-to-peak output voltages (without and with smoothing capacitor).
2. How does the ripple factor increase?
3. What’s the relationship between the peak-to-peak output voltage and the resistance (when C is constant)?
4. For which capacitor value is the filtering considered more effective?
5. For which value of capacitor filtering is the minimum output voltage equal to 10% of the maximum peak value of the output voltage?
6. What is the effect of increasing the capacitor filtering on the total harmonic distortion (THD) of the AC-source current?


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/courseware/electric-courseware/power-electronics/ac-to-dc-rectifiers/single-phase-diode-bridge-rectifier/exercises/part-1-single-phase-diode-bridge-rectifier-resistive-load.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
