> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/courseware/electric-courseware/power-electronics/ac-to-dc-rectifiers/single-phase-diode-bridge-rectifier/panels-overview.md).

# Panels Overview

## Understand the panels

The **Single-phase Diode Bridge Rectifier** model file, located in the folder **OP1130 - Power Electronics Courseware,** is **PE\_SinglePhaseDiodeRectifier-version.zip**

When starting the demo, the panel in figure 8 appears first with the default settings.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FlZKxSPBPfZ5dvM6suQ9z%2F1e46d47b-2bc8-49ab-b14a-6f785dea3ae7.png?alt=media&amp;token=04598226-c6cb-4a7f-90d1-9a1e7a70983a" alt=""><figcaption><p><strong>Figure 8</strong>: Start-Up Panel of the Single-Phase Diode Bridge Rectifier Laboratory</p></figcaption></figure>

The panel is to be operated as follows:

* In the upper right corner, under **Pre-Selected** the student can select the type of load, which is either resistive (with and without a smoothing capacitor) or inductive.
* Once load type is selected, the student can select the load value\
  For a resistive load, the scenarios are shown in figure 9; while figure 10 presents the inductive load scenarios

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2Fj6wokH2GdMwTQL0jbvAp%2F4598c5e6-6275-48c3-974c-790121d31bbb.png?alt=media&amp;token=2f46ac46-fe92-4be4-9338-6330c67d3fe7" alt="" width="450"><figcaption><p><strong>Figure 9</strong>: Changing the Resistive Load Value</p></figcaption></figure>

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FcqLB4zsqKExIUqOJRs7G%2F07bd2b59-7890-4da8-859b-d80e44e4cc8c.png?alt=media&amp;token=45c42d99-b458-4583-b04f-883a551dd447" alt="" width="495"><figcaption><p><strong>Figure 10</strong>: Changing the Inductive Load Value</p></figcaption></figure>

* In the lower left corner, the student can change control parameters and can switch control buttons (to enable/disable their associated functions).\
  Table 1 summarizes the control parameters, while table 2 is dedicated to the control buttons.
* After setting the control parameters, the students can observe the waveforms displayed in four scopes.\
  More details about the displayed waveforms are given in table 3.

### Control parameters of the single-phase diode bridge rectifier

| Control Parameters           | Default Value | Interval of Variation |
| ---------------------------- | ------------- | --------------------- |
| **AC Source Voltage (V)**    | 120           | \[0; 200]             |
| **AC Source Frequency (Hz)** | 60            | 50 or 60              |

### Control and switch buttons

<table data-search="false"><thead><tr><th width="151.800048828125">Control Buttons</th><th width="109"></th><th>Associated Functions</th></tr></thead><tbody><tr><td><strong>Trigger</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FmCCXwLxNfnusTG57ctI1%2Fimage.png?alt=media&amp;token=a2ff9f82-df34-4768-8cb0-8aa0691c3aa9" alt="" data-size="original"></td><td>The waveforms are not triggered. They “move”.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FUpmZx9ygHqew2DbZOpZ1%2Fimage.png?alt=media&amp;token=1003acc2-6c2a-4139-b5f4-f58e26f12fcf" alt=""></td><td>The waveforms are triggered with respect to a reference signal.</td></tr><tr><td><strong>Data Acq.</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FzdXCKRPC0zshf2sAcTLX%2Fimage.png?alt=media&amp;token=a5ccc256-839e-4ac9-9c89-ce84310c3969" alt="" data-size="original"></td><td>Data acquisition is disabled.</td></tr><tr><td></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2Fmuf6v9q6HLSv6W9acBLY%2Fimage.png?alt=media&amp;token=9e8198c2-e300-45bd-b9f9-3b61b0304f84" alt=""></td><td>Data acquisition is enabled and allows to record .mat files for offline studies, in particular harmonic analysis.</td></tr><tr><td><strong>HELP/BACK</strong></td><td><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FMdwKyVPMEEsxUFycsDRI%2Fimage.png?alt=media&amp;token=e9f43ea1-0735-4598-81a6-034f8757d907" alt="" data-size="original"></td><td>Open the Help page, where a summary of the single-phase diode bridge rectifier is given.</td></tr><tr><td> </td><td></td><td>Close the Help page and go back to the simulations.</td></tr><tr><td><strong>Switch</strong></td><td> <img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2F0t1bGhLuSQTYYaKXnBcp%2Fimage.png?alt=media&amp;token=9dc36b39-6962-4c6d-a8d6-8d6f866c1775" alt=""></td><td>AC Source frequency, 50 or 60 Hz.</td></tr></tbody></table>

On scope localization, the indices used will be like those of matrix elements.\
Hence, the scope located in the upper left corner (first row, first column) is denoted Scope<sub>11</sub>, while the scope in the upper right corner (first row, second column) is Scope<sub>12</sub>.\
By the same token, the scope in the lower left corner is Scope<sub>21</sub> while the scope in the lower right corner is Scope<sub>22</sub>.

### Scopes and displayed waveforms

| Scope                      | Content of Scopes & Displayed Waveforms |
| -------------------------- | --------------------------------------- |
| **Scope**<sub>**11**</sub> | Load and AC Source voltages             |
| **Scope**<sub>**21**</sub> | Diode D1 Voltage                        |
| **Scope**<sub>**12**</sub> | Load and AC Source currents             |
| **Scope**<sub>**22**</sub> | Diode D1 Current                        |

{% hint style="info" %}
The “Save File” under Scope Parameters allows the student to give different file names for data acquisition.\
It is possible to save up to eleven .mat files with the name “FileSavedcurrents\_X (where X can be anywhere from 0 to 10).\
The student can give X values via the “Save File”, and press “Data Acq.” for acquiring data.\
The data acquired can be used for offline harmonic studies. The saved data are in the following folder: *C:\OPAL-RT\TestDrive\v2.9.0.16\Models\Package2\_1\_CPU\package2\_1\_cpu\_sm\_master\OpNTtarget*
{% endhint %}

{% hint style="info" %}
The knobs “y-scale/div” can be used to modify the range settings in the y-axis for the scopes.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/courseware/electric-courseware/power-electronics/ac-to-dc-rectifiers/single-phase-diode-bridge-rectifier/panels-overview.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
