> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/courseware/electric-courseware/power-electronics/ac-to-dc-rectifiers/three-phase-diode-bridge-rectifier/exercises/part-1-three-phase-diode-bridge-rectifier-resistive-load.md).

# Part 1 - Three-phase Diode Bridge Rectifier - Resistive Load

## Varying resistive load (without smoothing capacitor C=0) <a href="#exercise-1-varying-resistive-load-without-smoothing-capacitor-c-0" id="exercise-1-varying-resistive-load-without-smoothing-capacitor-c-0"></a>

Open Three-Phase Diode Bridge Rectifier panel, choose in menu **Pre-Selected**: Three Phase: Varying Resistive Load without smoothing capacitor.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FPvjWg4ilw2lFvp2dhVr6%2Fimage.png?alt=media&amp;token=eb09fea6-55f9-4eb0-aa0b-16dd4f3ee89f" alt=""><figcaption><p><strong>Figure 16</strong>: Three-Phase Diode Bridge Rectifier Panel with a Resistive Load of 16.5 ohms</p></figcaption></figure>

### Default parameters <a href="#default-parameters" id="default-parameters"></a>

* AC Source Voltage : Ve= 120 V
* Frequency: 60 Hz
* R= 16.5 Ω

### Impact of varying resistive load

1. For R = 16.5 ohms and Ve=120, measure the following values:
   * the maximum peak value of the output voltage
   * the minimum peak value of the output voltage
   * the average output voltage
2. Compare these values with the calculated ones
3. Set Ve to 120V and the frequency to 60 Hz, and complete the following table for many values of R

<table data-search="false"><thead><tr><th>R (Ω)</th><th width="80" align="center">16.5</th><th width="80" align="center">25</th><th width="80.0001220703125" align="center">50</th><th width="80" align="center">100</th></tr></thead><tbody><tr><td><strong>Measured maximum peak value of the output current (A)</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td></tr><tr><td><strong>Calculated maximum peak value of the output current (A)</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td></tr><tr><td><strong>Measured minimum peak value of the output current (A)</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td></tr><tr><td><strong>Calculated minimum peak value of the output current (A)</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td></tr><tr><td><strong>Measured average output current (A)</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td></tr><tr><td><strong>Calculated average output current (A)</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td></tr><tr><td><strong>THD of AC-source current (%)</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td></tr></tbody></table>

4. Justify the shape of the output voltage and output current.
5. What is the effect of increasing the resistance value on THD?
6. Deduce the role of the three-phase diode bridge rectifier and compare it with the single-phase diode bridge rectifier.

## Varying resistive load (without smoothing capacitor C=0) <a href="#exercise-1-varying-resistive-load-without-smoothing-capacitor-c-0" id="exercise-1-varying-resistive-load-without-smoothing-capacitor-c-0"></a>

Open Three-Phase Diode Bridge Rectifier panel, choose in menu **Pre-Selected**: Three Phase: Varying Resistive Load without smoothing capacitor.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDxruHSCdsFPySecCdG48%2Fimage.png?alt=media&amp;token=d8859adb-44b0-4794-92f3-8829a4baa426" alt=""><figcaption><p><strong>Figure 16</strong>: Three-Phase Diode Bridge Rectifier Panel with a Resistive Load of 16.5 ohms</p></figcaption></figure>

### Default parameters <a href="#default-parameters" id="default-parameters"></a>

* AC Source Voltage : Ve= 120 V
* Frequency: 60 Hz
* R= 16.5 Ω
* C= 470 µF

### Impact of varying resistive load

Complete the following tables for different values of the smoothing capacitor.

#### Case 1: C=470 µF

<table data-search="false"><thead><tr><th>R (Ω)</th><th width="80" align="center">16.5</th><th width="80" align="center">25</th><th width="80.0001220703125" align="center">50</th><th width="80" align="center">100</th><th width="79.5968017578125">200</th></tr></thead><tbody><tr><td><strong>The maximum peak value of output voltage (V)</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td></td></tr><tr><td><strong>The minimum peak value of output voltage (V)</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td></td></tr><tr><td><strong>Form factor</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td></td></tr><tr><td><strong>Ripple factor</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td></td></tr><tr><td><strong>THD of AC-source Current (%)</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td></td></tr></tbody></table>

#### Case 2: C=1100 µF

<table data-search="false"><thead><tr><th>R (Ω)</th><th width="80" align="center">16.5</th><th width="80" align="center">25</th><th width="80.0001220703125" align="center">50</th><th width="80" align="center">100</th><th width="79.5968017578125">200</th></tr></thead><tbody><tr><td><strong>The maximum peak value of output voltage (V)</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td></td></tr><tr><td><strong>The minimum peak value of output voltage (V)</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td></td></tr><tr><td><strong>Form factor</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td></td></tr><tr><td><strong>Ripple factor</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td></td></tr><tr><td><strong>THD of AC-source Current (%)</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td></td></tr></tbody></table>

#### Case 3: C=0.1 F

<table data-search="false"><thead><tr><th>R (Ω)</th><th width="80" align="center">16.5</th><th width="80" align="center">25</th><th width="80.0001220703125" align="center">50</th><th width="80" align="center">100</th><th width="79.5968017578125">200</th></tr></thead><tbody><tr><td><strong>The maximum peak value of output voltage (V)</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td></td></tr><tr><td><strong>The minimum peak value of output voltage (V)</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td></td></tr><tr><td><strong>Form factor</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td></td></tr><tr><td><strong>Ripple factor</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td></td></tr><tr><td><strong>THD of AC-source Current (%)</strong></td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td align="center"> </td><td></td></tr></tbody></table>

Now, set R to 25 Ω.

* Compare values of the peak-to-peak output voltages (without and with smoothing capacitor).
* How does the ripple factor change with and without the smoothing capacitor?
* What’s the relation between the peak-to-peak output voltage and the resistance (when C is constant)?
* For which capacitor value is the filtering considered more effective?
* What is the effect of increasing the capacitor filtering on the total harmonic distortion (THD) of the AC-source current?


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/courseware/electric-courseware/power-electronics/ac-to-dc-rectifiers/three-phase-diode-bridge-rectifier/exercises/part-1-three-phase-diode-bridge-rectifier-resistive-load.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
