> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/courseware/electric-courseware/power-electronics/three-phase-three-level-neutral-point-clamped-converter.md).

# Three-phase Three-level Neutral-point Clamped Converter

This document is intended to teach the students about the Three-Phase Three-Level Neutral-Point Clamped converter, operating in inverter and rectifier modes, using real-time simulation exercises.

A description of the circuit is given first, allowing the student to understand the major components of the scheme, namely, the converter bridge topology, the voltage levels, and waveforms, the PWM generator, the filtering process, the load, the measurements and finally the power flow.

The simulation panels follow, with a thorough description of the different scenarios, the control parameters and buttons, the scopes with their associated waveforms.

Finally, simulation exercises covering the two possible modes (i) inverter and (ii) rectifier are proposed. In inverter mode, the load is a combination in series of a resistance, an inductance, and an AC-source. Additionally, the power flow is shown in real-time. The possibility to add or remove an LC filter, shows the students the impact of harmonics and the benefits of filtering. In rectifier mode, the AC-source on the load side becomes the generator, while the DC source is disconnected and the PWM generator is disabled. The students observe the waveform when the diodes are the sole conducting elements. The possibility to add a resistive load is given again with a full observation of the power flow.

## Authors <a href="#authors" id="authors"></a>

* [Danielle S. Nasrallah](https://www.linkedin.com/in/danielle-s-nasrallah-p-eng-ph-d-4308b95/), P. eng., Ph.D. OPAL-RT Technologies
* [Wolf Peter Jean Philippe](https://www.linkedin.com/in/wolf-peter-jean-philippe-371b4854/), Ph. D. OPAL-RT Technologies

{% hint style="info" %}
While every effort has been made to ensure accuracy in this publication, no responsibility can be accepted for errors or omissions.\
Data may change, as well as legislation, and you are strongly advised to obtain copies of the most recently issued regulations, standards, and guidelines.\
This publication is not intended to form the basis of a contract.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/courseware/electric-courseware/power-electronics/three-phase-three-level-neutral-point-clamped-converter.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
