> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/courseware/electric-courseware/renewable-energy/battery-energy-storage-system-bess/panels-overview.md).

# Panels Overview

## Understand the Panel <a href="#understanding-the-panel" id="understanding-the-panel"></a>

The **Battery Energy Storage System** model file, located in the folder **OP1142 - Renewable Energy,** is **RE\_BESS-version.zip**

When starting the demo, the panel in figure 3 appears first with the default settings.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2FDSHc3Qi4L7rt3gpWU8OK%2F8000e5ec-8c18-4427-a2e5-95149b465e20.png?alt=media&amp;token=9562d1dd-5fbe-44da-b705-4519d95577b7" alt=""><figcaption><p><strong>Figure 3</strong>: Start-Up Panel of the Battery Energy Storage System Laboratory</p></figcaption></figure>

The panel is to be operated as follows:

* In the top left corner, under **Operation Modes**, the student can select (via the switch button) to operate the BESS either as islanded or grid connected mode.
* Also, under Operation Modes, the student can set the bus of the BESS as “PV” or “PQ” mode.\
  In “PV” mode, the active power (P) and the voltage are controlled, while in “PQ” mode, both active and reactive power are controlled.

#### Control Parameters of the BESS

In the middle left corner, under **Setpoints**, the student can change the control parameters, which are summarized in the following table.

| Control Parameters                       | Default Value | Interval of Variation |
| ---------------------------------------- | ------------- | --------------------- |
| **Active Power Reference Pref (p.u.)**   | 0             | \[-1; 1]              |
| **Reactive Power Reference Qref (p.u.)** | 0             | \[-1; 1]              |
| **Voltage Reference Vref (p.u.)**        | 1             | \[0.95; 1.05]         |

## Content of scopes and displayed waveforms

After setting the control parameters, the students can observe the waveforms displayed in six scopes.\
More details about the displayed waveforms are given in table 2.

<table data-search="false"><thead><tr><th width="118">Scope</th><th>Content of Scopes &#x26; Displayed Waveforms</th></tr></thead><tbody><tr><td><strong>Scope</strong><sub><strong>1</strong></sub></td><td>Battery voltage</td></tr><tr><td><strong>Scope</strong><sub><strong>2</strong></sub></td><td>Battery current</td></tr><tr><td><strong>Scope</strong><sub><strong>3</strong></sub></td><td>State of charge (SoC) of the battery</td></tr><tr><td><strong>Scope</strong><sub><strong>11</strong></sub></td><td>Voltage <em>V</em><sub><em>a</em></sub> and current <em>I</em><sub><em>a</em></sub> measured between the three-phase inverter and the transformer at phase A (see figure 4)</td></tr><tr><td><strong>Scope</strong><sub><strong>12</strong></sub></td><td>Voltage magnitude of <em>V</em><sub><em>a</em></sub>  and grid frequency</td></tr><tr><td><strong>Scope</strong><sub><strong>21</strong></sub></td><td>Active power reference <em>P</em><sub><em>ref</em></sub> and active power of the BESS</td></tr><tr><td><strong>Scope</strong><sub><strong>22</strong></sub></td><td>Reactive power reference <em>Q</em><sub><em>ref</em></sub> and reactive power of the BESS</td></tr></tbody></table>

For identification purposes, the three scopes under **Battery Measurements** are denoted Scope<sub>1</sub>, Scope<sub>2</sub>, and Scope<sub>3</sub>.\
For the scopes under **System Measurements,** the indices will be like those of matrix elements.\
The scope in the bottom right corner, under **System Measurements**, is denoted as Scope<sub>22</sub>.\
By the same token, the other three scopes under **System Measurements** are denoted Scope<sub>11</sub>, Scope<sub>12</sub>, and Scope<sub>21</sub>.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2F3QnnhX3Nf7EwzA1ih8Bn%2Faf4732e4-beec-4d56-ab9d-e65f6b42441d.png?alt=media&amp;token=9155a850-1c56-486a-97df-8a306e279fd4" alt=""><figcaption><p><strong>Figure 4</strong>: Components of the Battery Energy Storage System</p></figcaption></figure>

## Help tab <a href="#help-tab" id="help-tab"></a>

When clicking on the “Help Contents” tab, the panel in figure 5 is displayed.\
In this panel, the student can see live displays of RMS currents and voltages, and power flow at different parts of the BESS.\
The student can validate the simulation results by checking that the power flow is balanced.\
Additionally, the base power and voltage values for p.u. computation are given in the “Help Contents” tab.

<figure><img src="https://4054096626-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYbyVjpgEQX9nfCkpYoFP%2Fuploads%2F0tvGZyJ86YowifI0xwSm%2F52bc8aa0-a74c-4454-9112-01982187dd3e.png?alt=media&amp;token=4ab31b9a-452c-42f0-9d4b-7d7321dc2ab4" alt=""><figcaption><p><strong>Figure 5</strong>: Help Contents Panel of the Battery Energy Storage System Laboratory</p></figcaption></figure>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/courseware/electric-courseware/renewable-energy/battery-energy-storage-system-bess/panels-overview.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
