> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/ehs/3.7/first-steps/integrate-ehs-into-rt-lab-and-hypersim-models/prepare-an-hypersim-model/fpga-based-circuit-block-options.md).

# Manage & Load Circuit Files

## Overview

The **eHS\_SE\_SFunction\_Drivers** block is associated with a Schematic Editor project file (`.ehs3`). Information from this file is loaded into the block, including the circuit definition, firmware selection, hardware configuration, simulation settings, and signal interfaces.

**Whenever the `.ehs3` file is modified, the block must be reloaded to reflect the latest configuration.**

This may occur after changes such as:

* Modifying the electrical circuit.
* Selecting a different firmware.
* Changing the target hardware platform.
* Updating simulation settings.
* Adding, removing, or modifying circuit I/O signals.
* Changing hardware or firmware configuration parameters.

In most cases, manual synchronization is not required because the circuit is automatically loaded when the simulation is started from **HYPERSIM**. However, during model development, manually loading the circuit is useful to immediately apply changes without running a simulation.

The **eHS** menu provides tools to load, replace, and locate the circuit associated with an **FPGA-based circuit** block.

## Load circuit

1. Right-click the **FPGA-based circuit** block.
2. Navigate to **eHS** and select **Load circuit** to synchronize the block with the latest version of the circuit file.

## New circuit

1. Right-click the **FPGA-based circuit** block.
2. Navigate to **eHS**, select **New circuit** to create a new `.ehs3` file at a selected location, assign it to the block, and open it in the Schematic Editor.

## Select circuit

1. Right-click the **FPGA-based circuit** block.
2. Navigate to **eHS** and select **Select Circuit** to browse and select another valid `.ehs3` file or legacy `.ehs` file.

## Show in explorer

1. Right-click the **FPGA-based circuit** block.
2. Navigate to **eHS** and select **Show in explorer** to open the circuit file directory in the file explorer.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/ehs/3.7/first-steps/integrate-ehs-into-rt-lab-and-hypersim-models/prepare-an-hypersim-model/fpga-based-circuit-block-options.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
