> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/ehs/3.7/model-in-schematic-editor/define-the-solver-settings.md).

# Define the Solver Settings

**Solver Settings** determine how the eHS solver mathematically solves the circuit model on the FPGA. The selected settings affect simulation accuracy, performance, FPGA resource usage, and achievable timesteps. This page describes the available settings and their impact on the simulation.

## Open the Solver Settings

In Schematic Editor, click **Solver Settings** at the bottom of the window to open the solver settings panel.

## Solver Settings parameters

Review the available solver settings in the table below and configure them as required for your application. Click **Apply** to save the changes.

<figure><img src="https://521571437-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fo99Izmvvw5eHT4ldzI4g%2Fuploads%2Fgit-blob-55f6ad8c2ef0b3963ab1b384d0f0d479681e34a6%2FSE_solver_setings.png?alt=media" alt="" width="420"><figcaption></figcaption></figure>

| Parameter                            | Description                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
| ------------------------------------ | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **Time Step**                        | <p>Defines the simulation time step.<br><strong>Auto</strong>: The solver will use the minimum time step achievable with the given circuit.<br><strong>Manual</strong>: Must be between <strong>50 ns and 4000 ns</strong>. The solver attempts to use the specified time step during the build process. If the requested time step is lower than the minimum achievable for the given circuit and firmware, a build error is generated.</p>                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  |
| **Parameter set storage management** | <p>Selects how parameter sets are stored and updated.<br><strong>From CPU (default)</strong>: Scenario updates are applied over multiple time steps (typically a few milliseconds). The number of scenarios is unlimited.<br><strong>From FPGA</strong>: Scenario updates are applied within a single time step. The number of scenarios is limited and depends on circuit complexity.<br>When using the <strong>Power Electronics Add-on</strong>, <strong>Parameter set storage management</strong> must be set to <strong>From FPGA</strong>. The <strong>From CPU</strong> option is not supported.</p>                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   |
| **Reset Pin**                        | <p>Enables to reset eHS and machine outputs to <code>0</code> during real-time simulation via a <strong>Reset Input</strong> pin.<br>When <strong>ON</strong>, a <strong>rising edge</strong> on the reset <strong>input</strong> (typically bit 0 of LoadIn port 2) initiates the reset. All eHS outputs (measurements, downsampled, averaged data) and machine outputs are set to <code>0</code>. The solver resumes normal operation when the reset signal is released. The reset <strong>output</strong> provides a <strong>feedback signal</strong> indicating the reset state.</p>                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |
| **Circuit analysis method**          | Read-only field indicating the method used to analyze the electrical circuit. This is inherited by the selected firmware.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
| **Solver strategy**                  | <p>Defines the solver performance mode and optimization objective. See <a href="https://www.opal-rt.com/docs/ehs/3.7/model-in-schematic-editor/define-the-solver-settings/how-to-choose-solver-strategy-smallest-time-step-vs-lowest-latency.md">eHS Solver Strategies</a> for details.<br><strong>Standard</strong>: Supports time steps down to <strong>200 ns</strong><br><strong>High Performance – Lowest Latency</strong>: Enables high-performance features (including switching interpolation and time steps down to \~<strong>90 ns</strong>) and optimizes <strong>interaction latency</strong> with other system components. Suitable for high-frequency applications (e.g., >100 kHz, resonant converters, DAB).<br><strong>High Performance – Smallest Time Step</strong>: Enables high-performance features (including switching interpolation and time steps down to \~<strong>90 ns</strong>) and optimizes for the <strong>smallest achievable time step</strong>. Suitable for high-frequency applications (e.g., >100 kHz, resonant converters, DAB).<br>Both <strong>High Performance</strong> modes require a license with the <strong>EHS\_HIGH\_PERFORMANCE\_TOKEN</strong> feature with adequate number of token.</p> |
| **Discretization methods**           | <p>Selects the circuit discretization method used by the solver. See <a href="https://www.opal-rt.com/docs/ehs/3.7/model-in-schematic-editor/define-the-solver-settings/how-to-choose-discretization-method-pade5-and-backward-euler.md">eHS Solver Discretization Methods</a> for details.<br><strong>Backward Euler</strong>: Supported in <strong>Gen 4</strong> and <strong>Gen 5</strong><br><strong>PADE5</strong>: Available in <strong>Gen 5 only</strong>, providing higher-order discretization for improved accuracy</p>                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |
| **Switch interpolation**             | <p>Allows to sample gates at a higher rate than the discretization Time Step.<br>Each circuit analysis method offers different switch interpolation capabilities.</p>                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         |
| **Time factor scale**                | <p>Allows the user to do slower than real time simulation for fast dynamic circuits.<br>Currently not yet supported.</p>                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/ehs/3.7/model-in-schematic-editor/define-the-solver-settings.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
