> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/ehs/3.7/model-in-schematic-editor/optimize-the-ehs-circuit/model-advanced-mutual-inductances-and-common-mode-chokes.md).

# Model Advanced Mutual Inductances & Common-Mode Chokes

## Overview

The Schematic Editor provides two mutual inductance blocks:

* **Single Phase Two Winding Mutual Inductance**
* **Three Winding Mutual Inductance**

These blocks can be used to model:

* Conventional mutual inductances
* Common-mode chokes
* Higher-order mutual inductance matrices
* Unbalanced coupling matrices

While many applications can be represented directly using the provided blocks, some mutual inductance matrices cannot. Examples include:

* Three-winding systems with unequal coupling terms
* Systems with more than three windings
* Specialized common-mode filter structures

In these cases, equivalent circuits can be created by combining multiple mutual inductance blocks, as described below.

## Create a single-phase common-mode choke

The **Single Phase Two Winding Mutual Inductance** block can be used to model a single-phase common-mode choke.

The block implements a two-winding mutual inductance with equal mutual coupling between the windings.

The voltage-current relationship is:

$$
\begin{bmatrix} v\_1 \ v\_2 \end{bmatrix} = \begin{bmatrix} R\_1 & R\_m \ R\_m & R\_2 \end{bmatrix} \begin{bmatrix} i\_1 \ i\_2 \end{bmatrix} + \begin{bmatrix} L\_1 & L\_m \ L\_m & L\_2 \end{bmatrix} \frac{d}{dt} \begin{bmatrix} i\_1 \ i\_2 \end{bmatrix}
$$

Assuming:

$$
R\_1 = R\_2 = R\_m = 0 ; and ; L\_1 = L\_2 = L\_l + L\_m ; where ;
L\_l ; is ; the ; leakage ; inductance
$$

$$
\begin{bmatrix} v\_1 \ v\_2 \end{bmatrix} = \begin{bmatrix} L\_l + L\_m & L\_m \ L\_m & L\_l + L\_m \end{bmatrix} \frac{d}{dt} \begin{bmatrix} i\_1 \ i\_2 \end{bmatrix}
$$

After transforming the equations from the phase domain to the modal domain:

$$
\begin{bmatrix} v\_d \ v\_0 \end{bmatrix} = \begin{bmatrix} L\_l & 0 \ 0 & L\_l + 2L\_m \end{bmatrix} \frac{d}{dt} \begin{bmatrix} i\_d \ i\_0 \end{bmatrix}
$$

The resulting equations show that:

* The **common-mode current** flows through an inductance equal to the common-mode inductance.
* The **differential-mode current** flows through the leakage inductance.

Therefore, a common-mode choke can be obtained by:

* Choosing a large mutual inductance.
* Keeping the leakage inductance as small as possible.

## Create a three-phase common-mode choke

The **Three Winding Mutual Inductance** block can be used to model a three-phase common-mode choke.

The block implements a balanced three-winding mutual inductance in which all mutual coupling terms are identical.

The voltage-current relationship is:

$$
\begin{bmatrix} v\_1 \ v\_2 \ v\_3 \end{bmatrix} = \begin{bmatrix} R\_1 & R\_m & R\_m \ R\_m & R\_2 & R\_m \ R\_m & R\_m & R\_3 \end{bmatrix} \begin{bmatrix} i\_1 \ i\_2 \ i\_3 \end{bmatrix} + \begin{bmatrix} L\_1 & L\_m & L\_m \ L\_m & L\_2 & L\_m \ L\_m & L\_m & L\_3 \end{bmatrix} \frac{d}{dt} \begin{bmatrix} i\_1 \ i\_2 \ i\_3 \end{bmatrix}
$$

Because all off-diagonal terms are equal, the block naturally represents a balanced mutual coupling structure.

Assuming:

$$
R\_1 = R\_2 = R\_m = 0 ; and ; L\_1 = L\_2 = L\_l + L\_m ; where ;
L\_l ; is ; the ; leakage ; inductance
$$

$$
\begin{bmatrix} v\_1 \ v\_2 \ v\_3 \end{bmatrix} = \begin{bmatrix} L\_l + L\_m & L\_m & L\_m \ L\_m & L\_l + L\_m & L\_m \ L\_m & L\_m & L\_l + L\_m \end{bmatrix} \frac{d}{dt} \begin{bmatrix} i\_1 \ i\_2 \ i\_3 \end{bmatrix}
$$

After transforming to the modal domain:

$$
\begin{bmatrix} v\_p \ v\_n \ v\_0 \end{bmatrix} = \begin{bmatrix} L\_l & 0 & 0 \ 0 & L\_l & 0 \ 0 & 0 & L\_l + 3L\_m \end{bmatrix} \frac{d}{dt} \begin{bmatrix} i\_p \ i\_n \ i\_0 \end{bmatrix}
$$

The resulting equations show that:

* Common-mode currents flow through a large common-mode inductance.
* Differential-mode currents flow through the leakage inductance.

To approximate an ideal common-mode choke:

* Maximize the mutual coupling.
* Minimize the leakage inductance.

### Numerical example

To implement a three-phase common-mode choke with a common-mode inductance of $$L\_{CM}=10,\mu\mathrm{H}$$, choose a differential-mode inductance much smaller than the common-mode inductance, for example $$L\_{DM} = \frac{L\_{CM}}{100} = 100,\mathrm{nH}$$.

Since $$L\_{DM} = L\_{l}$$ and $$L\_{CM} = L\_l + 3L\_m \approx 3L\_m$$​, the mutual inductance is $$L\_{m} = 3.33,\mu\mathrm{H}$$.

The winding self-inductances are then $$L\_1 = L\_2 = L\_3 = L\_l + L\_m = 3.34,\mu\mathrm{H}$$.

The **Three Winding Mutual Inductance** block can then be parameterized as shown below.

<figure><img src="https://521571437-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fo99Izmvvw5eHT4ldzI4g%2Fuploads%2Fgit-blob-f540a43680872b60a2197884860374a4500577d1%2Fse-common-monde-inductances.png?alt=media" alt=""><figcaption></figcaption></figure>

## Create an unbalanced 3×3 mutual inductance

The **Three Winding Mutual Inductance** block models a balanced three-winding mutual inductance, where all mutual coupling terms are equal.

To model an arbitrary 3×3 mutual inductance with unequal coupling terms, use three interconnected **Single Phase Two Winding Mutual Inductance** blocks, as shown below.

<figure><img src="https://521571437-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fo99Izmvvw5eHT4ldzI4g%2Fuploads%2Fgit-blob-0e075b0140874be1b06d4dd34b047a03f0205b1b%2Fse-3x3-mutual-inductance.png?alt=media" alt="" width="320"><figcaption></figcaption></figure>

Configure the three blocks as follows:

* **m12**

$$
R\_{12,1} = \frac{R\_1}{2}, \quad
L\_{12,1} = \frac{L\_1}{2}, \quad
R\_{12,2} = \frac{R\_2}{2}, \quad
L\_{12,2} = \frac{L\_2}{2}, \quad
R\_{12,m} = R\_{12}, \quad
L\_{12,m} = L\_{12}
$$

* **m23**

$$
R\_{23,1} = \frac{R\_2}{2}, \quad
L\_{23,1} = \frac{L\_2}{2}, \quad
R\_{23,2} = \frac{R\_3}{2}, \quad
L\_{23,2} = \frac{L\_3}{2}, \quad
R\_{23,m} = R\_{23}, \quad
L\_{23,m} = L\_{23}
$$

* **m13**

$$
R\_{13,1} = \frac{R\_1}{2}, \quad
L\_{13,1} = \frac{L\_1}{2}, \quad
R\_{13,2} = \frac{R\_3}{2}, \quad
L\_{13,2} = \frac{L\_3}{2}, \quad
R\_{13,m} = R\_{13}, \quad
L\_{13,m} = L\_{13}
$$

## Create a balanced 4×4 mutual inductance

When all mutual coupling terms are equal, a balanced 4×4 mutual inductance can be implemented using:

* One **Three Winding Mutual Inductance** block and
* Three **Single Phase Two Winding Mutual Inductance** blocks

<figure><img src="https://521571437-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fo99Izmvvw5eHT4ldzI4g%2Fuploads%2Fgit-blob-96bfa83b7711cb959218f9cf2947f000bfd2e4db%2Fse-4x4-mutual-inductance.png?alt=media" alt="" width="320"><figcaption></figcaption></figure>

Configure the blocks as follows:

* **m123**

$$
R\_{123,1}=\frac{R\_1}{2}, \quad
L\_{123,1}=\frac{L\_1}{2}, \quad
R\_{123,2}=\frac{R\_2}{2}, \quad
L\_{123,2}=\frac{L\_2}{2}, \quad
R\_{123,3}=\frac{R\_3}{2}, \quad
L\_{123,3}=\frac{L\_3}{2}, \quad
R\_{123,m}=R\_m, \quad
L\_{123,m}=L\_m
$$

* **m34**

$$
R\_{34,1}=\frac{R\_3}{2}, \quad
L\_{34,1}=\frac{L\_3}{2}, \quad
R\_{34,2}=\frac{R\_4}{3}, \quad
L\_{34,2}=\frac{L\_4}{3}, \quad
R\_{34,m}=R\_m, \quad
L\_{34,m}=L\_m
$$

* **m24**

$$
R\_{24,1}=\frac{R\_2}{2}, \quad
L\_{24,1}=\frac{L\_2}{2}, \quad
R\_{24,2}=\frac{R\_4}{3}, \quad
L\_{24,2}=\frac{L\_4}{3}, \quad
R\_{24,m}=R\_m, \quad
L\_{24,m}=L\_m
$$

* **m14**

$$
R\_{14,1}=\frac{R\_1}{2}, \quad
L\_{14,1}=\frac{L\_1}{2}, \quad
R\_{14,2}=\frac{R\_4}{3}, \quad
L\_{14,2}=\frac{L\_4}{3}, \quad
R\_{14,m}=R\_m, \quad
L\_{14,m}=L\_m
$$

## Create an unbalanced 4×4 mutual inductance

When mutual coupling terms differ, the three-winding block can no longer be used directly.

Instead, replace it with its equivalent implementation based on multiple **Single Phase Two Winding Mutual Inductance** blocks, following the same approach used for the unbalanced 3×3 case.

<figure><img src="https://521571437-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fo99Izmvvw5eHT4ldzI4g%2Fuploads%2Fgit-blob-deee420c19bb60378c979d1b4da0dd7812ef360b%2Fse-4x4-unbalanced-mutual-inductance.png?alt=media" alt="" width="320"><figcaption></figcaption></figure>

Configure the blocks as follows:

* **m34**

$$
R\_{34,m}=R\_{34}, \quad
L\_{34,m}=L\_{34}
$$

* **m24**

$$
R\_{24,m}=R\_{24}, \quad
L\_{24,m}=L\_{24}
$$

* **m14**

$$
R\_{14,m}=R\_{14}, \quad
L\_{14,m}=L\_{14}
$$

The block topology remains unchanged; only the mutual inductance and resistance values differ.

## Create an N×N mutual inductance

The same principle can be applied recursively to create larger mutual inductance matrices.

Higher-order mutual inductances are built by combining three-winding and two-winding mutual inductance blocks into equivalent circuits that reproduce the target inductance matrix.

<figure><img src="https://521571437-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fo99Izmvvw5eHT4ldzI4g%2Fuploads%2Fgit-blob-1cbaf546801721e30753e770fe579313b333fec0%2Fse-nxn-mutual-inductance.png?alt=media" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/ehs/3.7/model-in-schematic-editor/optimize-the-ehs-circuit/model-advanced-mutual-inductances-and-common-mode-chokes.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
