> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/ehs/model-in-schematic-editor/library-blocks-reference/transformer-blocks/three-winding-mutual-inductance.md).

# Three Winding Mutual Inductance

## Description

<figure><img src="https://3212678799-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FABuoXNYgvaoO7wIe3bfO%2Fuploads%2Fgit-blob-6128bdb749f3ea024fdfd7dadda751fcf2fd11d1%2FSE_3windmutinductance.png?alt=media" alt=""><figcaption></figcaption></figure>

The **three Winding Mutual Inductance block** represents a set of three coupled inductors. The voltage across the three windings is:

$$
\begin{aligned}
\begin{bmatrix}
V\_1\\
V\_2\\
V3
\end{bmatrix}
&=
\begin{bmatrix}
L\_1 & L\_m & L\_m\\
L\_m & L\_2& L\_m \\
L\_m & L\_m& L\_3 \\
\end{bmatrix}
\frac{d}{dt}
\begin{bmatrix}
i\_1\\
i\_2\\
i\_3
\end{bmatrix}
-------------

\begin{bmatrix}
R\_1 & R\_m & R\_m\\
R\_m & R\_2 & R\_m \\
R\_m & R\_m & R\_3 \\
\end{bmatrix}
\begin{bmatrix}
i\_1\\
i\_2\\
i\_3
\end{bmatrix}
\end{aligned}
$$

where:

* *V*<sub>*i*</sub> is voltage across the *i*th winding;
* *I*<sub>*i*</sub> is current through the *i*th winding;
* R<sub>*i*</sub> is resistance of the *i*th winding;
* R<sub>*m*</sub> is mutual resistance between windings;
* *L*<sub>*i*</sub> is self-inductance of the *i*th winding;
* *L*<sub>*m*</sub> is mutual inductance between windings.

In the preceding equations, currents are positive when flowing into the positive node of their respective inductor terminals.

{% hint style="info" %}
This block is only available in the eHS library.
{% endhint %}

## Parameters

<figure><img src="https://3212678799-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FABuoXNYgvaoO7wIe3bfO%2Fuploads%2Fgit-blob-96c1b2d6e2aaeaf9697091507e9ca7eb53762c9d%2FSE_3windmutinductparam.png?alt=media" alt=""><figcaption></figcaption></figure>

{% tabs %}
{% tab title="Winding 1" %}

| Parameter                | Description                                              | Sets feature | I/O & Monitoring |
| ------------------------ | -------------------------------------------------------- | ------------ | ---------------- |
| **Resistance (R1)**      | The resistance, in ohms, of the primary winding.         | Yes          | N/A              |
| **Self-inductance (L1)** | The self-inductance, in henries, of the primary winding. | Yes          | N/A              |
| {% endtab %}             |                                                          |              |                  |

{% tab title="Winding 2" %}

| Parameter                | Description                                                | Sets feature | I/O & Monitoring |
| ------------------------ | ---------------------------------------------------------- | ------------ | ---------------- |
| **Resistance (R2)**      | The resistance, in ohms, of the secondary winding.         | Yes          | N/A              |
| **Self-inductance (L2)** | The self-inductance, in henries, of the secondary winding. | Yes          | N/A              |
| {% endtab %}             |                                                            |              |                  |

{% tab title="Winding 3" %}

| Parameter                | Description                                               | Sets feature | I/O & Monitoring |
| ------------------------ | --------------------------------------------------------- | ------------ | ---------------- |
| **Resistance (R3)**      | The resistance, in ohms, of the tertiary winding.         | Yes          | N/A              |
| **Self-inductance (L3)** | The self-inductance, in henries, of the tertiary winding. | Yes          | N/A              |
| {% endtab %}             |                                                           |              |                  |

{% tab title="Mutual" %}

| Parameter           | Description                        | Sets feature | I/O & Monitoring |
| ------------------- | ---------------------------------- | ------------ | ---------------- |
| **Resistance (Rm)** | The mutual resistance, in ohms.    | Yes          | N/A              |
| **Inductance (Lm)** | The mutual inductance, in henries. | Yes          | N/A              |
| {% endtab %}        |                                    |              |                  |
| {% endtabs %}       |                                    |              |                  |

### Conserving ports

| Port   | Description   |
| ------ | ------------- |
| **p1** | Positive port |
| **n1** | Negative port |
| **p2** | Positive port |
| **n2** | Negative port |
| **p3** | Positive port |
| **n3** | Negative port |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/ehs/model-in-schematic-editor/library-blocks-reference/transformer-blocks/three-winding-mutual-inductance.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
