> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/ehs/model-in-schematic-editor/optimize-the-ehs-circuit/select-the-right-switch-block.md).

# Select the Right Switch Block

eHS supports several single-switch blocks that differ only by their **static electrical characteristics**. Since transient behavior is not modeled, the choice of switch primarily affects the voltage-current relationship and conduction/blocking capabilities.

## Ideal switch

The **Ideal Switch** can:

* Conduct current in both directions
* Block voltage in both directions
* Open or close solely according to the gate signal

The switch state is entirely controlled by the gate signal.

<figure><img src="https://3212678799-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FABuoXNYgvaoO7wIe3bfO%2Fuploads%2Fgit-blob-0f4db4861a125d0ae394ee8c74f58f060dd78619%2Fse-ideal-switch-charac.png?alt=media" alt=""><figcaption></figcaption></figure>

## Breaker

The **Breaker** can:

* Conduct current in both directions
* Block voltage in both directions

It conducts while the gate signal is active. When the gate signal is removed, the breaker remains conducting until the current reaches zero, at which point it opens.

<figure><img src="https://3212678799-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FABuoXNYgvaoO7wIe3bfO%2Fuploads%2Fgit-blob-6734a8a177c195d17c615899e48659e89f1deeed%2Fse-breaker-charac.png?alt=media" alt=""><figcaption></figcaption></figure>

## Diode

The **Diode**:

* Conducts only from **anode to cathode**
* Blocks reverse voltage

The diode does not receive a gate signal. Its state depends entirely on the electrical conditions of the circuit (spontaneous commutation).

<figure><img src="https://3212678799-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FABuoXNYgvaoO7wIe3bfO%2Fuploads%2Fgit-blob-7407026cb5b0a5fb1853211918918a68d1d4244c%2Fse-diode-charac.png?alt=media" alt=""><figcaption></figcaption></figure>

## Thyristor

The **Thyristor**:

* Conducts only from **anode to cathode**
* Requires both:
  * A gate signal
  * Direct polarization

Once conducting, it remains on until the current reverses and becomes negative.

<figure><img src="https://3212678799-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FABuoXNYgvaoO7wIe3bfO%2Fuploads%2Fgit-blob-362d7e111a040ba254aea9b35008fccf5586558c%2Fse-thyristor-charac.png?alt=media" alt=""><figcaption></figcaption></figure>

## FET

The **FET**:

* Conducts current in both directions
* Blocks voltage in both directions
* Is controlled solely by the gate signal

<figure><img src="https://3212678799-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FABuoXNYgvaoO7wIe3bfO%2Fuploads%2Fgit-blob-95535b74441552a5ae5a0452be4ee5fcb4d2028a%2Fimage%20(42).png?alt=media" alt=""><figcaption></figcaption></figure>

## IGBT

The **IGBT**:

* Conducts current in one direction
* Blocks direct voltage
* Always blocks when reverse polarized

<figure><img src="https://3212678799-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FABuoXNYgvaoO7wIe3bfO%2Fuploads%2Fgit-blob-d8cfc3563286e5922cbe5a3ca203f5d32fa39c85%2Fse-igbt-charac.png?alt=media" alt=""><figcaption></figcaption></figure>

## IGBT and FET with antiparallel diode

The **IGBT with Antiparallel Diode**:

* Conducts current in both directions
* Blocks direct voltage
* Conducts when reverse polarized through the antiparallel diode

<figure><img src="https://3212678799-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FABuoXNYgvaoO7wIe3bfO%2Fuploads%2Fgit-blob-a7182ed6f31df86f9e582c09a46c568a4fda0cc8%2Fse-igbt-fet-antiparallel-charac.png?alt=media" alt=""><figcaption></figcaption></figure>

## Bidirectional switch

The **Bidirectional Switch**:

* Conducts current in both directions
* Blocks voltage in both directions
* Is controlled using two gate signals

<figure><img src="https://3212678799-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FABuoXNYgvaoO7wIe3bfO%2Fuploads%2Fgit-blob-14bd66d1960f4a8070153b96c67c751eed9ba2ed%2Fse-bidirectional-switch-charac.png?alt=media" alt=""><figcaption></figcaption></figure>

## Understanding static characteristics

The static characteristic curves shown for each switch model are defined by the switch resistances:

* **R**<sub>**on**</sub>: Resistance when the switch is closed
* **R**<sub>**off**</sub>: Resistance when the switch is open

<figure><img src="https://3212678799-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FABuoXNYgvaoO7wIe3bfO%2Fuploads%2Fgit-blob-a34330adc7f7905f784464e6ce16cbfbf5cb6e4e%2Fse-static-charac.png?alt=media" alt=""><figcaption></figcaption></figure>

These parameters determine the slope of the voltage-current characteristic:

* **Closed switch:** voltage-current ratio determined by **R**<sub>**on**</sub>
* **Open switch:** voltage-current ratio determined by **R**<sub>**off**</sub>

As a result, switches are not perfectly ideal and exhibit finite resistance in both their conducting and blocking states.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/ehs/model-in-schematic-editor/optimize-the-ehs-circuit/select-the-right-switch-block.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
