> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/configure-ios/communication-protocol-ios/abb-ps935-driver/configure-abb-ps935.md).

# Configure ABB PS935

When working with communication protocols, it is recommended to begin by configuring the protocol through the **I/O Interfaces** section in HYPERSIM before proceeding with other steps.

## Configure the ABB PS935 I/O interface

{% stepper %}
{% step %}

### Add a new I/O interface

1. In the **HYPERSIM** tab, click **I/O Interface** in the **Sensors & I/Os** section to open the **I/O Interface Configuration** window.

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-881ca3164b1b5fa2d589ecb145163b15e7af8f64%2FDR-hyp-io-interface.png?alt=media" alt=""><figcaption></figcaption></figure>

2. Right‑click **ABB PS935** and select **Add**. Keep the default name or enter a custom one.

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-4cc940997aef5ef6dfcc310b3b34bbaa6a42949f%2FDR-hyp-ps935-add.png?alt=media" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Configure the general settings

Click the newly added **ABB PS935** in the **I/O Interface Configuration** window and configure the general settings.

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-0595d05f3eb98260dfb51739aefcc2effe8ea826%2FDR-hyp-ps935-gen.png?alt=media" alt=""><figcaption></figcaption></figure>

<table><thead><tr><th width="165">Parameter</th><th>Value (Description)</th></tr></thead><tbody><tr><td><strong>MAC address</strong></td><td>Unique identifier of the physical ABB PS935 device being configured. The value must follow the format 0x########, where each # corresponds to a hexadecimal digit (0–9, A–F).</td></tr><tr><td><strong>Count digital in</strong></td><td>Number of binary values sent from HYPERSIM to the device.</td></tr><tr><td><strong>Count digital out</strong></td><td>Number of binary values received by HYPERSIM from the device.</td></tr><tr><td><strong>Count float in</strong></td><td>Number of floating‑point values sent from HYPERSIM to the device.</td></tr><tr><td><strong>Count float out</strong></td><td>Number of floating‑point values received by HYPERSIM from the device.</td></tr><tr><td><strong>Board execution mode</strong></td><td>Selects the loopback mode used by the driver:<br><strong>No loopback</strong>: Interfaces with the actual PS935 hardware (default operation). Data usage depends on the programmed firmware.<br><strong>Loopback HW</strong>: Uses the physical board in internal loopback mode to validate hardware setup (read/write on same memory space).<br><strong>Loopback SW</strong>: Emulates the board without hardware, for testing the HYPERSIM model only.</td></tr></tbody></table>
{% endstep %}

{% step %}

### Save the configuration

Click **Ok** or **Apply** to save the configuration.
{% endstep %}
{% endstepper %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/configure-ios/communication-protocol-ios/abb-ps935-driver/configure-abb-ps935.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
