> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/configure-ios/communication-protocol-ios/iec-61850-8-1-goose/requirements-features-and-limitations.md).

# Requirements, Features & Limitations

## Software requirements

The **IEC 61850-8-1 GOOSE** driver is included by default with <code class="expression">space.vars.Software</code> and does not require any additional installation.

## Hardware requirements

The IEC 61850-8-1 GOOSE protocol communicates over Ethernet (TCP/IP) using the simulator’s built-in LAN ports, **eliminating the need for additional hardware**. Standard Ethernet cables are required to establish these connections. For systems requiring extra network interfaces, IEC 61850-8-1 GOOSE can also operate over additional Ethernet ports provided by supported PCIe network cards. Refer to your system’s hardware modularity documentation to determine which external PCIe network and serial cards are supported.

## License requirements

### Simulator license

[Verify that an active HYPERSIM license](https://www.opal-rt.com/docs/hypersim/licensing-reference/simulator-license.md) with the following features is installed on the simulator to run simulations using the IEC 61850-8-1 GOOSE protocol:

| Feature Name             | Required Status      | Description                                                                    |
| ------------------------ | -------------------- | ------------------------------------------------------------------------------ |
| DP\_IEC61850\_GOOSE\_PUB | enabled              | Enables IEC 61850 GOOSE publishing                                             |
| DP\_IEC61850\_GOOSE\_SUB | enabled              | Enables IEC 61850 GOOSE subscribing                                            |
| DP\_TOTAL\_NUMBER        | 50 enabled (or more) | Number of activated I/O data points for Ethernet-based communication protocols |

{% hint style="info" %}
A **data point** represents any individual value exchanged with the simulator, such as a boolean, integer, analog value, status, coil, register, phasor, quality bit, timestamp, or event. For Ethernet‑based communication protocols, OPAL‑RT licensing counts each **transmitted or received data value** as **one data point**.

**Example for IEC 61850-8-1 GOOSE:**

6 status signals + 3 analog values + 6 quality bits + 1 timestamp = **16 data points**
{% endhint %}

### Workstation license

**No additional feature is required** in the workstation license to run simulations in HYPERSIM using the IEC 61850-8-1 GOOSE protocol.

## Supported features

* Simulation supported on **Windows** and **Linux**.
* User interface can display the **entire IEC 61850 data model** from any SCL file. **All GOOSE control blocks** found in any SCL/SCD/ICD file.
* All imported SCL files are **copied into the project folder** to ensure full project portability.
* File entries can be **updated or replaced**.
* A **change‑detection mechanism** alerts the user when a file’s contents differ from the current project version.
* Simulator can **transmit and receive GOOSE messages** (status, control, or command types).
* Publishing/subscribing is configured by:
  * Importing an **SCL/SCD/ICD file**.
  * Creating connection points for **each data attribute** included in the selected GOOSE dataset.
* Supports full handling of:
  * GOOSE datasets
  * State numbers
  * Sequence numbers
  * Quality attributes
  * Timestamps (as provided in the dataset)
* User interface displays all **GOOSE Control Blocks (GCBs)** defined in imported SCL files.
* User interface Allows inspection of:
  * Associated datasets
  * Control block parameters
  * Dataset attributes and their types

## Limitations

* Supported basic attributes are: BOOLEAN, INT8, INT16, INT32, INT64, INT8U, INT16U, INT32U, FLOAT32, FLOAT64, Enum, Dbpos, Tcmd, Check, Quality, Timestamp and Struct.
* Timestamp data type is only processed at the GOOSE header level as UTC field; otherwise it is treated as a simple integer.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/configure-ios/communication-protocol-ios/iec-61850-8-1-goose/requirements-features-and-limitations.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
