> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/examples/facts-and-hvdc/thyristor-controlled-series-capacitor-tcsc.md).

# Thyristor Controlled Series Capacitor (TCSC)

## Description

The **TCSC** example, located in **File > Open an Example File > FACTS & HVDC**, demonstrates a Thyristor Controlled Series Capacitor connected to a 500 kV long transmission line (modeled as a series R–L equivalent of approximately 500 km) to increase power transfer capability.

The objective is to illustrate TCSC operation in capacitive and inductive modes, controller firing-angle limits, and an optional manual fixed-alpha mode.

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-9b4f8ce228d7a98b0103bfcf7a4a7a4d470af980%2Fimage%20(72).png?alt=media" alt=""><figcaption></figcaption></figure>

## Requirements

This example model does not require any additional hardware or licenses.

## Detailed explanation

Without TCSC operation, the power transfer is approximately 110 MW. With nominal series compensation set to 75% of the line inductance (using series capacitors) and a firing angle alpha of 90°, the TCSC increases the effective power transfer. The natural oscillatory frequency of the TCSC in this model is 136 Hz (2.7 times the fundamental frequency).

The TCSC operates in two modes, with controller limits applied to avoid resonance. In this example, TCSC resonance occurs around alpha = 58°, and overall system resonance occurs around alpha = 67°. Therefore, the controller is constrained to operate outside the 49° < alpha < 69° region:

* Capacitive mode: 69° ≤ alpha ≤ 90°
* Inductive mode: 0° ≤ alpha ≤ 49°

A manual fixed-alpha mode is also available.

## Simulation and results

For the first 0.5 s, the TCSC is bypassed by a circuit breaker, and the power transfer remains around 110 MW. At 0.5 s, the TCSC begins regulating the series impedance to 128 ohm. The PI controller is tuned fast to show the full response within a 5 s window. With compensation, the power transfer increases to approximately 610 MW.

At 2.5 s, a 5% step is applied to the reference impedance, confirming the TCSC tracks the new setpoint. At 3.3 s, a 4% reduction in the source voltage is applied, followed by a return to 1 pu at 3.8 s. Throughout these events, the TCSC maintains its impedance at the reference value.

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-1e686384529bea7b508d7fe70093bc8e33d0e307%2Fimage%20(73).png?alt=media" alt=""><figcaption></figcaption></figure>

## References

\[1] D.Jovcic, G.N.Pillai "Analytical Modelling of TCSC Dynamics" IEEE® Transactions on Power Delivery, vol 20, Issue 2, April 2005, pp. 1097-1104.

\[2] OPAL-RT SMART POWER SIMUALTION - [Thyristor Controlled Series Capacitor (TCSC)](https://www.opal-rt.com/docs/smart-power-simulation-software-sps/example-models/power-transmission-and-distribution/thyristor-controlled-series-capacitor-tcsc.md) Example


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/examples/facts-and-hvdc/thyristor-controlled-series-capacitor-tcsc.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
