> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/library-blocks-reference/control-exciters/ieee-ac6a.md).

# IEEE AC6A

## Description

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-bb016d14207ce9eebc29606b807acb937c5eeddc%2Fimage%20(840).png?alt=media" alt="" width="229"><figcaption></figcaption></figure>

**AC6A** block, located in the **Control Exciters** library, implements the IEEE Std. 412.5 **t**ype AC6A excitation system model. It represents field-controlled alternator-rectifier excitation systems with system-supplied electronic voltage regulators.

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-34e4468e1f1856972a6f22e7df0c82831690a7df%2Fjfx9852328522449993842.png?alt=media" alt=""><figcaption><p>AC6A diagram</p></figcaption></figure>

## Mask parameters

{% tabs %}
{% tab title="Exiter" %}

<table><thead><tr><th width="200.199951171875">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Tr</strong></td><td>Filter time constant (s)</td></tr><tr><td><strong>Ka</strong></td><td>Voltage regulator gain (pu)</td></tr><tr><td><strong>Ta</strong></td><td>Voltage regulator time constant (s)</td></tr><tr><td><strong>Tk</strong></td><td>Voltage regulator time constant (s)</td></tr><tr><td><strong>Tb</strong></td><td>Voltage regulator time constant (s)</td></tr><tr><td><strong>Tc</strong></td><td>Voltage regulator time constant (s)</td></tr><tr><td><strong>VAmax</strong></td><td>Maximum voltage regulator output (pu)</td></tr><tr><td><strong>VAmin</strong></td><td>Minimum voltage regulator output (pu)</td></tr><tr><td><strong>VRmax</strong></td><td>Maximum voltage regulator output (pu)</td></tr><tr><td><strong>VRmin</strong></td><td>Minimum voltage regulator output (pu)</td></tr><tr><td><strong>Te</strong></td><td>Exciter time constant; integration rate associated with exciter control (s)</td></tr><tr><td><strong>VFELIM</strong></td><td>Exciter field current limit reference (pu)</td></tr><tr><td><strong>Kh</strong></td><td>Exciter field current limit gain (pu)</td></tr><tr><td><strong>Th</strong></td><td>Exciter field current limiter time constant (s)</td></tr><tr><td><strong>Tj</strong></td><td>Exciter field current limiter time constant (s)</td></tr><tr><td><strong>Kc</strong></td><td>Rectifier loading factor proportional to commutating reactance (pu)</td></tr><tr><td><strong>Kd</strong></td><td>Demagnetizing factor; a function of exciter alternator reactances (pu)</td></tr><tr><td><strong>Ke</strong></td><td>Exciter constant related to self-excited field (pu)</td></tr></tbody></table>

**Se(Ve)**

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-0f0be8e83486837ee71c4b7ceb379c98c6a690a4%2Fimage%20(839).png?alt=media" alt="" width="193"><figcaption></figcaption></figure>

<table><thead><tr><th width="200.4000244140625">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Ve1</strong></td><td>Exciter alternator output voltage, back of commutating reactance, at which saturation is defined (pu)</td></tr><tr><td><strong>Se1</strong></td><td>Exciter saturation function value at the corresponding exciter voltage, Ve1, back of commutating reactance (pu)</td></tr><tr><td><strong>Ve2</strong></td><td>Exciter alternator output voltage, back of commutating reactance, at which saturation is defined (pu)</td></tr><tr><td><strong>Se2</strong></td><td>Exciter saturation function value at the corresponding exciter voltage, Ve1, back of commutating reactance (pu)</td></tr></tbody></table>
{% endtab %}

{% tab title="Initial values" %}

<table><thead><tr><th width="201">Parameter</th><th>Description</th></tr></thead><tbody><tr><td>Efd0</td><td>Initial exciter output voltage (pu)</td></tr><tr><td>Ifd0</td><td>Initial exciter output current (pu)</td></tr></tbody></table>
{% endtab %}
{% endtabs %}

## Inputs

<table><thead><tr><th width="200.39996337890625">Input</th><th>Description</th></tr></thead><tbody><tr><td><strong>E</strong><sub><strong>C</strong></sub></td><td>Output of terminal voltage transducer and load compensation elements (pu)</td></tr><tr><td><strong>V</strong><sub><strong>UEL</strong></sub></td><td>Under-excitation limiter output (pu)</td></tr><tr><td><strong>V</strong><sub><strong>OEL</strong></sub></td><td>Overexcitation limiter output (pu)</td></tr><tr><td><strong>V</strong><sub><strong>Othsg</strong></sub></td><td>Stabilizer VOTHSG output (pu)</td></tr><tr><td><strong>V</strong><sub><strong>S</strong></sub></td><td>Output voltage of a Power System Stabilizer (PSS) (pu)</td></tr><tr><td><strong>V</strong><sub><strong>REF</strong></sub></td><td>Voltage regulator reference voltage (pu)</td></tr><tr><td><strong>I</strong><sub><strong>FD</strong></sub></td><td>Synchronous machine field current (pu)</td></tr></tbody></table>

## Outputs

<table><thead><tr><th width="199.60003662109375">Output</th><th>Description</th></tr></thead><tbody><tr><td><strong>EFD</strong></td><td>Exciter output voltage (pu)</td></tr></tbody></table>

## References

"IEEE Recommended Practice for Excitation System Models for Power System Stability Studies," in *IEEE Std 421.5-2005 (Revision of IEEE Std 421.5-1992)* , vol., no., pp.1-93, 21 April 2006.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/library-blocks-reference/control-exciters/ieee-ac6a.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
