> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/library-blocks-reference/control-exciters/ieee-dc2a.md).

# IEEE DC2A

## Description

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-baf2c91969d53984df1701c3c2aacf8f4fc0e429%2Fimage%20(807).png?alt=media" alt="" width="190"><figcaption></figcaption></figure>

The **DC2A excitation system** block, located in the **Control Exciters** library, based on the IEEE Std 412.5 type DC2A model. The excitation system uses a field-controlled DC commutator referenced to the terminal voltage.

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-e7ad7930c3d30b12c5f8b9f11184f86647b856d0%2Fimage%20(808).png?alt=media" alt=""><figcaption><p>DC2A diagram</p></figcaption></figure>

{% hint style="info" %}
The HYPERSIM<sup>®</sup> simulation option Set Initial Conditions must be checked for the automatic initialization to work properly.
{% endhint %}

## Mask parameters

{% tabs %}
{% tab title="AVR" %}

<table><thead><tr><th width="201">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Tr</strong></td><td>Regulator input filter time constant (s)</td></tr><tr><td><strong>Tb</strong></td><td>Voltage regulator time constant (s)</td></tr><tr><td><strong>Tc</strong></td><td>Voltage regulator time constant (s)</td></tr><tr><td><strong>Ka</strong></td><td>Voltage regulator gain</td></tr><tr><td><strong>Ta</strong></td><td>Regulator time constant (s)</td></tr><tr><td><strong>Kf</strong></td><td>Excitation control system stabilizer gain</td></tr><tr><td><strong>Tf</strong></td><td>Excitation control system stabilizer time constant (s)</td></tr><tr><td><strong>Vrmax</strong></td><td>Maximum voltage regulator output (pu)</td></tr><tr><td><strong>Vrmin</strong></td><td>Minimum voltage regulator output (pu)</td></tr></tbody></table>
{% endtab %}

{% tab title="Exciter" %}

<table><thead><tr><th width="200.20001220703125">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Te</strong></td><td>Exciter time constant (s)</td></tr><tr><td><strong>Ke</strong></td><td>Exciter constant related to self-excited field</td></tr><tr><td><strong>Se1, Se2</strong></td><td>Exciter saturation factor at the corresponding Vex (pu)</td></tr><tr><td><strong>ZEfd1, Efd2</strong></td><td>Exciter voltage for the exciter saturation function (pu)</td></tr></tbody></table>

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-0693d09e4a363f1ce94b35874cffe4c4fb8fb18c%2Fimage%20(809).png?alt=media" alt=""><figcaption><p>Exciter diagram</p></figcaption></figure>
{% endtab %}

{% tab title="Initial values" %}

| Parameter | Description                               |
| --------- | ----------------------------------------- |
| Efd0      | Exciter output voltage initial value (pu) |

{% hint style="info" %}
The parameter Efd0 can be set manually by entering a numeric value, or automatically from load-flow results by referencing a synchronous machine variable.

For example, if the synchronous machine connected to the excitation system is named “SM1”, set Efd0 to “=SM1.EfdInit” for a thermal or hydraulic machine, and to “=SM1.EFD\_Init” for a pu standard or pu fundamental machine.
{% endhint %}
{% endtab %}
{% endtabs %}

## Inputs

<table><thead><tr><th width="200.4000244140625">Input</th><th>Description</th></tr></thead><tbody><tr><td><strong>Vc1</strong></td><td>Signal proportional to the compensated terminal voltage. If a load compensator block is not used upstream from the exciter block, Vc1 equals Vt (main alternator terminal voltage) (pu).</td></tr><tr><td><strong>Vref</strong></td><td>Voltage regulator reference voltage (pu)</td></tr><tr><td><strong>Vs</strong></td><td>Output of a power system stabilizer (PSS) (pu)</td></tr><tr><td><strong>Vuel</strong></td><td>Under-excitation limiter output (pu)</td></tr></tbody></table>

## Outputs

<table><thead><tr><th width="199.5999755859375">Output</th><th>Description</th></tr></thead><tbody><tr><td><strong>Efd</strong></td><td>Exciter output voltage (pu)</td></tr></tbody></table>

## References

“IEEE Recommended Practice for Excitation System Models for Power System Models for Power System Stability Studies,” IEEE Standard 421.5-2005.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/library-blocks-reference/control-exciters/ieee-dc2a.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
