> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/library-blocks-reference/control-exciters/ieee-dc3a.md).

# IEEE DC3A

## Description

The **DC3A** block, located in the **Control Exciters** library, implements the IEEE Std 421.5 type DC3A excitation system model. It represents older non-continuous regulators for DC commutator exciters. The regulator adjusts voltage with a rheostat for small errors and shorts or forces the signal to a reference for large errors.

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-40ff52a40236e864c6ae6af837b6344cf611fd7f%2Fimage%20(810).png?alt=media" alt=""><figcaption><p>DC3A diagram</p></figcaption></figure>

{% hint style="info" %}
The HYPERSIM<sup>®</sup> simulation option Set Initial Conditions must be checked for the automatic initialization to work properly.
{% endhint %}

## Mask parameters

{% tabs %}
{% tab title="AVR" %}

| Parameter    | Description                                                                                                                                                                                                      |
| ------------ | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **Tr**       | Regulator input filter time constant (unit: s). This input filter is not part of the standard and has no typical values recommended in \[1]; it was added for flexibility. Note: Set to 0 to disable the filter. |
| **Kv**       | Fast raise/lower contact setting (unit: s).                                                                                                                                                                      |
| **Trh**      | Rheostat travel time (unit: s).                                                                                                                                                                                  |
| **Vrmax**    | Maximum voltage regulator output (unit: pu).                                                                                                                                                                     |
| **Vrmin**    | Minimum voltage regulator output (unit: pu).                                                                                                                                                                     |
| {% endtab %} |                                                                                                                                                                                                                  |

{% tab title="Exciter" %}

| Parameter       | Description                                                     |
| --------------- | --------------------------------------------------------------- |
| **Te**          | Exciter time constant (unit: s).                                |
| **Ke**          | Exciter constant related to self-excited field (unit: -).       |
| **Se1, Se2**    | Exciter saturation factor at the corresponding Vex (unit: pu).  |
| **ZEfd1, Efd2** | Exciter voltage for the exciter saturation function (unit: pu). |

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-0693d09e4a363f1ce94b35874cffe4c4fb8fb18c%2Fimage%20(809).png?alt=media" alt=""><figcaption></figcaption></figure>
{% endtab %}

{% tab title="Initial values" %}

| Parameter | Description                                      |
| --------- | ------------------------------------------------ |
| **Efd0**  | Exciter output voltage initial value (unit: pu). |

{% hint style="info" %}
The parameter **Efd0** can be set manually by entering a numerical value. It can also be set automatically based on load flow calculations by entering a referenced synchronous machine variable.

For instance, if the synchronous machine name is “SM1”, set Efd0 to “=SM1.EfdInit” for a thermal machine or a hydraulic machine, and to “=SM1.EFD\_Init” for a pu standard or pu fundamental machine.
{% endhint %}
{% endtab %}
{% endtabs %}

## Inputs

<table><thead><tr><th width="200.4000244140625">Input</th><th>Description</th></tr></thead><tbody><tr><td><strong>Vc1</strong></td><td>Signal proportional to compensated terminal voltage (unit: pu). If a load compensator block is not used upstream from the exciter block, Vc1 equals Vt (main alternator terminal voltage).</td></tr><tr><td><strong>Vref</strong></td><td>Voltage regulator reference voltage (unit: pu).</td></tr></tbody></table>

## Outputs

<table><thead><tr><th width="200.4000244140625">Output</th><th>Description</th></tr></thead><tbody><tr><td><strong>Efd</strong></td><td>Exciter output voltage (unit: pu).</td></tr></tbody></table>

## References

“IEEE Recommended Practice for Excitation System Models for Power System Models forPower System Stability Studies,” IEEE Standard 421.5-2005.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/library-blocks-reference/control-exciters/ieee-dc3a.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
