> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/library-blocks-reference/control-exciters/ieee-esst4b.md).

# IEEE ESST4B

## Description

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-b116f263da11e26cbacf0ea44442f68b66b7c7be%2Fimage%20(842).png?alt=media" alt="" width="133"><figcaption></figcaption></figure>

The **ESST4B** block, located in the **Control Exciters** library,models the IEEE Std 421.5 type ST4B excitation system in which is applies a low-pass filter to the terminal voltage transducer output EC. This model is a variation of type ST3A, replacing the lag–lead regulator with a proportional–integral (PI) regulator. The PI regulators use non-windup limits. Because the voltage regulator is typically implemented digitally, the model carries the “B” suffix.

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-2b426672b83a64524fe3b0d129f5260bdb715ea3%2Fimage%20(843).png?alt=media" alt=""><figcaption><p>Both potential-and compound source rectifier excitation systems are modeled</p></figcaption></figure>

Moreover, the regulator has a low-value gate for the OEL limit and summation of UEL and V/Hz control at the regulator input. With PSS control, the PSS remains active when the unit enters UEL limit control, unlike designs with take-over limiters. The power component model can represent bus-fed exciters (KI = 0 and XL = 0), compound static systems (XL = 0), and potential- and compound-source systems where XL ≠ 0. The recommended PSS for the ST4B excitation model is type PSS2B.

## Mask parameters

{% tabs %}
{% tab title="AVR" %}

<table><thead><tr><th width="200.39996337890625">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Tr</strong></td><td>Regulator input filter time constant (s)</td></tr><tr><td><strong>Kpr</strong></td><td>Voltage regulator proportional gain</td></tr><tr><td><strong>Kir</strong></td><td>Voltage regulator integral gain</td></tr><tr><td><strong>Vrmin</strong></td><td>Minimum voltage regulator output (pu)</td></tr><tr><td><strong>Vrmax</strong></td><td>Maximum voltage regulator output (pu)</td></tr><tr><td><strong>Ta</strong></td><td>Voltage regulator time constant (s)</td></tr><tr><td><strong>Kg</strong></td><td>Feedback gain constant of the inner-loop field regulator</td></tr><tr><td><strong>Kpm</strong></td><td>Voltage regulator proportional gain</td></tr><tr><td><strong>Kim</strong></td><td>Voltage regulator integral gain</td></tr><tr><td><strong>Vmmin</strong></td><td>Minimum output factor of converter bridge corresponding to firing angle command to thyristors (pu)</td></tr><tr><td><strong>Vmmax</strong></td><td>Maximum output factor of converter bridge corresponding to firing angle command to thyristors (pu)</td></tr></tbody></table>
{% endtab %}

{% tab title="Exciter" %}

<table><thead><tr><th width="199.5999755859375">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Kp</strong></td><td>Potential circuit real-part gain coefficient</td></tr><tr><td><strong>Kj</strong></td><td>Potential circuit imaginary-part gain coefficient</td></tr><tr><td><strong>Xl</strong></td><td>Reactance associated with the potential source (pu)</td></tr><tr><td><strong>Kc</strong></td><td>Rectifier loading factor proportional to commutating reactance</td></tr><tr><td><strong>Vbmax</strong></td><td>Maximum available exciter voltage (pu)</td></tr></tbody></table>
{% endtab %}

{% tab title="Initial values" %}

<table><thead><tr><th width="201.20001220703125">Parameter</th><th>Description</th></tr></thead><tbody><tr><td>Efd0</td><td>Initial exciter output voltage (pu)</td></tr><tr><td>Ifd0</td><td>Initial exciter output current (pu)</td></tr></tbody></table>
{% endtab %}
{% endtabs %}

## Inputs

<table><thead><tr><th width="199.60003662109375">Input</th><th>Description</th></tr></thead><tbody><tr><td><strong>E</strong><sub><strong>C</strong></sub></td><td>Output of terminal voltage transducer and load compensation elements (pu)</td></tr><tr><td><strong>V</strong><sub><strong>UEL</strong></sub></td><td>Under-excitation limiter output (pu)</td></tr><tr><td>V<sub><strong>S</strong></sub></td><td>Output voltage of a Power System Stabilizer (PSS) (pu)</td></tr><tr><td><strong>V</strong><sub><strong>REF</strong></sub></td><td>Voltage regulator reference voltage (pu)</td></tr><tr><td><strong>V</strong><sub><strong>T</strong></sub></td><td>Synchronous machine terminal voltage (pu)</td></tr><tr><td><strong>I</strong><sub><strong>T</strong></sub></td><td>Synchronous machine terminal current (pu)</td></tr><tr><td><strong>I</strong><sub><strong>FD</strong></sub></td><td>Synchronous machine field current (pu)</td></tr></tbody></table>

## Outputs

<table><thead><tr><th width="201.20001220703125">Output</th><th>Description</th></tr></thead><tbody><tr><td><strong>EFD</strong></td><td>Exciter output voltage (pu)</td></tr></tbody></table>

## References

"IEEE Recommended Practice for Excitation System Models for Power System Stability Studies," in *IEEE Std 421.5-2016 (Revision of IEEE Std 421.5-2005)* , vol., no., pp.1-207, 26 Aug. 2016.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/library-blocks-reference/control-exciters/ieee-esst4b.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
