> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/library-blocks-reference/control-measurements/pos-seq-variable-frequency.md).

# Pos seq, variable frequency

## Description

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-96b12ab62b750ee2dde6b1e61092b5155bc9e5e4%2Fimage%20(688).png?alt=media" alt="" width="222"><figcaption></figcaption></figure>

The **Positive-sequence variable frequency** block, located in the **Control Measurements** library, computes the positive-sequence (magnitude and phase) of the input signal **abc** over a running window of one cycle of the fundamental frequency provided by input **f**. The reference frame for the computation is given by input **wt**. The output is held constant to the specified **Initial magnitude** and **Initial phase** values for one cycle of the specified initial frequency.

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-d733d3bc45dc89f4208cb15b4afa1abdbeeeabaf%2Fimage%20(690).png?alt=media" alt=""><figcaption><p>Internal circuit of the block</p></figcaption></figure>

## Mask parameters

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-622d9f6e5720a4c1db7def757f9723611c04fa8d%2Fimage%20(689).png?alt=media" alt="" width="450"><figcaption></figcaption></figure>

<table><thead><tr><th width="260.4000244140625">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Description</strong></td><td>Use this field to add all kinds of information about the component.</td></tr><tr><td><strong>Initial frequency</strong></td><td>Initial frequency for the first simulation cycle (Hz) Finit = [0, 1e12].<br>Cannot be modified during the simulation.</td></tr><tr><td><strong>Minimum frequency</strong></td><td>Minimum expected frequency of the input signal (Hz) Fmin = [0, 1e12] .<br>Cannot be modified during the simulation.</td></tr><tr><td><strong>Initial magnitude</strong></td><td>Initial value of the magnitude of the output signal for the first simulation cycle MagInit = [0, 1e12]<br>Cannot be modified during the simulation.</td></tr><tr><td><strong>Initial phase</strong></td><td>Initial value of the phase of the output signal for the first simulation cycle (°) PhaseInit = [0, 360]<br>Cannot be modified during the simulation.</td></tr></tbody></table>

## Inputs

<table><thead><tr><th width="260.39996337890625">Input</th><th>Description</th></tr></thead><tbody><tr><td><strong>abc</strong></td><td>Vectorized input containing phase-to-ground voltages (Va, Vb, Vc) or phase-to-ground currents (Ia, Ib, Ic) (V or A).</td></tr><tr><td><strong>f</strong></td><td>Frequency signal used to calculate the positive-sequence of the input signal abc <strong>(</strong>Hz).</td></tr><tr><td><strong>wt</strong></td><td>Angle of the reference signal used for the calculation of the positive-sequence of the input signal abc (rad/s).</td></tr></tbody></table>

## Outputs

<table><thead><tr><th width="260.39996337890625">Output</th><th>Description</th></tr></thead><tbody><tr><td><strong>Mag</strong></td><td>Amplitude of the positive-sequence of the input signal abc (V or A).</td></tr><tr><td><strong>Pha</strong></td><td>Phase of the positive-sequence of the input signal abc (°).</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/library-blocks-reference/control-measurements/pos-seq-variable-frequency.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
