> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/library-blocks-reference/control-smart-inverters/wtga_a.md).

# WTGA\_A

## Description

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-2276274820b4d80eb4b3d2afd50940c569424182%2FCSI_WTGA_A_block.png?alt=media" alt="" width="215"><figcaption></figcaption></figure>

The **Wind Turbine Generator Aerodynamics (WTGA\_A)** block, located in the **Control Smart Inverters library**, is the WECC generic aerodynamics model used to represent the mechanical power capture of a wind turbine rotor in renewable energy simulations. It provides a simplified, technology-agnostic approximation of aerodynamic behavior by modeling the relationship between blade pitch angle and mechanical power. In system-level studies, WTGA\_A supplies the mechanical power value to the drive-train model. It is typically used in Type 3 wind turbine representations, where the mechanical interface and rotor inertia remain explicit, and is bypassed for Type 4 turbines whose power capture is decoupled from the grid by full converters. \[1]

WTGA\_A receives the blade pitch angle $\theta$ from the generic pitch controller model WTGP\_A and provides mechanical power to the generic drive-train model WTGT\_A. Block diagram is presented in figure below.

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-b3aff87ffbdf2ffe000b563655a08c4037fefb69%2FCSI_WTGA_A_diagram.png?alt=media" alt="" width="400"><figcaption></figcaption></figure>

{% hint style="danger" %}
This block requires a valid license on both the simulator and the workstation with the feature SMART INVERTER enabled.
{% endhint %}

## Mask parameters

{% tabs %}
{% tab title="General" %}

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-dbb9d1d4cee4731d5c3a0a215114e6f91103caf8%2FCSI_WTGA_A_mask_GeneralTab.png?alt=media" alt="" width="500"><figcaption></figcaption></figure>

| Parameter                 | Description                                                                                           | Variable & Constraints |
| ------------------------- | ----------------------------------------------------------------------------------------------------- | ---------------------- |
| **Aerodynamic factor Ka** | Aerodynamic gain factor, typically set to 0.007 unless otherwise specified by the manufacturer (OEM). | Ka unconstrained       |
| {% endtab %}              |                                                                                                       |                        |

{% tab title="Initial Conditions" %}

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-e4c50d3eb336af1ec795bd25490c2ce76f9af78c%2FCSI_WTGA_A_mask_InitCondTab.png?alt=media" alt="" width="500"><figcaption></figcaption></figure>

| Parameter                        | Description                                                                                                           | Variable & Constraints |
| -------------------------------- | --------------------------------------------------------------------------------------------------------------------- | ---------------------- |
| **Initial pitch angle θ0**       | Initial pitch angle. Set $\theta\_0$ to 0 for maximum power operation; use 5 to 10 degrees if the plant is curtailed. | Theta0 unconstrained   |
| **Initial mechanical power Pm0** | Initial mechanical power.                                                                                             | Pm0 unconstrained      |
| {% endtab %}                     |                                                                                                                       |                        |
| {% endtabs %}                    |                                                                                                                       |                        |

## Inputs

| Input           | Description                  |
| --------------- | ---------------------------- |
| **pitch angle** | Blade pitch angle (degrees). |

## Outputs

| Output | Description                         |
| ------ | ----------------------------------- |
| **Pm** | Wind turbine mechanical power (pu). |

## Signals available for monitoring and external I/O connections (via sensors form)

All block inputs and outputs are available as signals for monitoring and for external I/O connections.

## References

\[1] Model User Guide for Generic Renewable Energy System Models, EPRI, October 2023.

## Acknowledgements

{% hint style="info" %}

## Acknowledgements <a href="#acknowledgements" id="acknowledgements"></a>

The development of the <code class="expression">page.vars.block\_name</code> block in the Smart Inverter Control Library is a contribution of CanmetENERGY at Natural Resource Canada.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/library-blocks-reference/control-smart-inverters/wtga_a.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
