> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/library-blocks-reference/control-stabilizers/ieee-st.md).

# IEEE ST

## Description

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-068d54ecdb379cfa9b7637d9a224e4e91e5814b1%2Fimage%20(564).png?alt=media" alt="" width="134"><figcaption></figcaption></figure>

The **IEEEST** block implements the Power System Stabilizer (PSS) model described in \[1] and \[2].

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-07975aaa0d3cabae06ba3d5815ab9c916b81cfd2%2Fimage%20(565).png?alt=media" alt=""><figcaption><p>IEEST block architecture</p></figcaption></figure>

## Mask parameters

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-b83fe368a02690bbb2acc0550a5b82d1822be78c%2FIEEEST.jpg?alt=media" alt=""><figcaption></figcaption></figure>

{% tabs %}
{% tab title="IEEEST" %}

<table><thead><tr><th width="187">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Input Type</strong></td><td>Select the input type. See the list of input types in the Inputs section.</td></tr><tr><td><strong>A1, A2, A3, A4, A5, A6</strong></td><td>Notch filter parameters.</td></tr><tr><td><strong>T1, T3</strong></td><td>Lead compensating time constants (s).</td></tr><tr><td><strong>T2, T4</strong></td><td>Lag compensating time constants (s).</td></tr><tr><td><strong>T5, T6</strong></td><td>Washout time constants (s).</td></tr><tr><td><strong>Ks</strong></td><td>Stabilizer gain.</td></tr><tr><td><strong>Lsmax</strong></td><td>Maximum stabilizer output (pu).</td></tr><tr><td><strong>Lsmin</strong></td><td>Minimum stabilizer output (pu).</td></tr><tr><td><strong>Vcl</strong></td><td>Lower cutoff threshold for the stabilizer input Vct (pu).</td></tr><tr><td><strong>Vcu</strong></td><td>Upper cutoff threshold for the stabilizer input Vct (pu).</td></tr></tbody></table>
{% endtab %}

{% tab title="Initial values" %}

<table><thead><tr><th width="179">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Input Reference</strong></td><td>Reference to the input.</td></tr></tbody></table>
{% endtab %}
{% endtabs %}

## Inputs

<table><thead><tr><th width="179.99993896484375">Input</th><th>Description</th></tr></thead><tbody><tr><td><strong>Input</strong></td><td><p>The input can be one of the following types (pu unless noted):</p><p>Type 1 – Rotor Speed: Reference speed w* (pu) of the synchronous generator.</p><p>Type 2 – Bus frequency: Reference frequency f* (pu) of the synchronous generator.</p><p>Type 3 – Generator electrical power on MBASE base: Reference electrical power output Pe0* (pu) of the synchronous generator.</p><p>Type 4 – Generator accelerating power (Pm – Pe0): Reference input = 0.</p><p>Type 5 – Bus voltage: Reference voltage Vt* (pu).</p><p>Type 6 – Derivative of pu bus voltage: Reference input = 0.</p></td></tr><tr><td><strong>Vct</strong></td><td>Compensator terminal voltage of a remote bus for input types 2, 5, and 6. This may be omitted if Vcl and Vcu are zero (pu).</td></tr></tbody></table>

## Outputs

<table><thead><tr><th width="180.79998779296875">Output</th><th>Description</th></tr></thead><tbody><tr><td><strong>Vs</strong></td><td>Power system stabilizer output (pu).</td></tr></tbody></table>

## References

\[1] Siemens Industry, Inc. Siemens Power Technologies International, "PSS®E 34.2.0 MODEL LIBRARY," April 2017.

\[2] IEEE, "IEEE Recommended Practice for Excitation System Models for Power System Stability Studies," IEEE Std 421.5-1992, pp. 1-56, 10 Aug. 1992.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/library-blocks-reference/control-stabilizers/ieee-st.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
