> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/library-blocks-reference/network-lines-and-cables/wideband-line-cable-fitter.md).

# Wideband Line/Cable Fitter

## Description

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-5f3527797b5cdf3aeeebf8376a326e9633b8e30c%2Fimage%20(1138).png?alt=media" alt=""><figcaption></figcaption></figure>

The **Wideband Line/Cable Filter** block, located in the **Network Lines and Cables** library, models “WB m-phase” device. This device accepts model data files from the **Line Data** and **Cable Data (old)** modules. After running the device and generating the model data, the user can reopen the **WB Fitter** to view the fitting results for the characteristic admittance Yc​ and the propagation function H.

The data generated by this device is used by the **Wideband Line/Cable** model. The convergence tolerance is specified as a relative tolerance and can be adjusted if fitting issues occur; however, the default value is adequate in most cases. More theoretical and implementation details are provided in \[1].

### Data of a 3-phase WB Line Model <a href="#widebandline-cable-dataofa3-phasewblinemodel" id="widebandline-cable-dataofa3-phasewblinemodel"></a>

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-32c7f244b23768da4ccb754341847d289b43c080%2Fimage%20(397).png?alt=media" alt="" width="563"><figcaption><p>Geometrical data of a 735-kV transmission line example to simulate a 3-phase WB model.</p></figcaption></figure>

The calculation of the electrical parameters can be done with the [Line Data](https://www.opal-rt.com/docs/hypersim/library-blocks-reference/network-lines-and-cables/line-data.md) auxiliary module. The lyz file is used in the [Wideband Line/Cable Fitter](https://www.opal-rt.com/docs/hypersim/library-blocks-reference/network-lines-and-cables/wideband-line-cable-fitter.md) module to produce a dat file for the WB line model.

<details>

<summary>Example of the dat file generated with the Wideband Line/Cable Fitter (extract)</summary>

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-7578985325b6451a533d28722905a51c1d91b7bf%2Fimage%20(398).png?alt=media" alt=""><figcaption></figcaption></figure>

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-b85957addbfb657379a64ff3e07b718f6953da16%2Fimage%20(399).png?alt=media" alt=""><figcaption></figcaption></figure>

</details>

## Mask parameters

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-afbbb54a873d5886c943459752b422b6d3bfebb1%2Fimage%20(1139).png?alt=media" alt="" width="533"><figcaption></figcaption></figure>

| Parameter                     | Description                                                                                                             |
| ----------------------------- | ----------------------------------------------------------------------------------------------------------------------- |
| **Description**               | Use this field to add information about the component.                                                                  |
| **EMTP .dat file**            | The path to the EMTP .dat file produced by the “WB fitter” (Wideband Line/Cable Fitter) containing the line parameters. |
| **Number of conductors**      | Number of conductors in the line/cable system, Nb\_conducteurs \[0, 1e64]                                               |
| **Minimum propagation delay** | Minimum value of the different propagation mode delays in the line/cable system (s), MinPropagationDelay \[ 0, 1e64 ]   |
| **Number of Yc poles**        | Number of poles in the fitting of the characteristic admittance matrix, nbYcPoles \[0, 9999]                            |
| **Number of H poles**         | Sum of the different propagation function pole numbers, nbHPoles \[0, 9999],                                            |
| **Number of modes**           | Number of propagation modes, nbModes \[0, 9999]                                                                         |
| **Number of phases**          | Number of phases, numPhases \[0, 12]                                                                                    |

## Conserving ports

| Port                    | Description                                                      |
| ----------------------- | ---------------------------------------------------------------- |
| **net\_(1,2,...,n)\_1** | Network connection of phases (1,2,..,n) of the **left (+)** side |
| **net\_(1,2,...,n)\_2** | Network connection of phases (1,2,...,n) of the **right** side   |

## Inputs

This block has no inputs.

## Outputs

This block has no outputs.

## Reference

\[1] Morched A., Gustavsen B., and Tartibi M., “A universal model for accurate calculation of electromagnetic transients on overhead lines and underground cables,” IEEE Transactions on Power Delivery, vol. 14, no. 3, July 1999, pp. 1032–1038.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/library-blocks-reference/network-lines-and-cables/wideband-line-cable-fitter.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
