> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/library-blocks-reference/network-loads/pq-load-1-ph-series.md).

# PQ Load, 1-Ph Series

## Description

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-4b29f6e96a4ef1762cf486adc2f8b32833108ee7%2Fimage%20(1148).png?alt=media" alt="" width="126"><figcaption></figcaption></figure>

The **PQ Load, 1-ph series** block, located in the **Network Loads library**, is a two-terminal single-phase element composed of an equivalent RL series or RC series branch, where each branch can include an equivalent resistance (P → R), an equivalent inductance (Q > 0 → L), or an equivalent capacitance (Q < 0 → C) connected in series.

{% hint style="danger" %}
This block is intended to be connected between phases in a three-phase network.
{% endhint %}

### Load model

The PQ load consists of the series combination of equivalent R, L and C branches and the series combination of equivalent R and L branches. The following rules are applied:

* If P=0 and Q=0, the element becomes disconnected in all solution methods.
* The **RL series** inductance equivalent is calculated using $$L = \frac{V\_{\text{base}}^2 \cdot Q}{\omega \cdot (P^2 + Q^2)}$$ and the resistance value is $$R = \frac{V\_{\text{base}}^2 \cdot P}{P^2 + Q^2}$$
* When Q<0, the capacitance value becomes $$C(Q < 0) = \frac{P^2 + Q^2}{V\_{\text{base}}^2 \cdot Q \cdot \omega}$$

### Model equations

The model equations of this load are given by:

$$
P = P\_0 \cdot \left( \frac{V}{V\_0} \right)^{N\_p} \cdot \left( 1 + K\_{pf} \cdot \Delta f \right)\\
Q = Q\_0 \cdot \left( \frac{V}{V\_0} \right)^{N\_q} \cdot \left( 1 + K\_{qf} \cdot \Delta f \right)
$$

where:

$P\_0$: Active power under nominal conditions

$Q\_0$: Reactive power under nominal conditions

$V\_0$: Nominal voltage

$F\_0$: Frequency deviation from the nominal value F0 in pu.

$K\_{pf}$: Active power-Frequency coefficient

$K\_{qf}$: Reactive power-Frequency coefficient

$N\_p$: Active power-Voltage coefficient

$N\_q$: Reactive power-Voltage coefficient

$V$: RMS voltage measured between connection nodes **Net\_1** and **Net\_3**

By adjusting Np and Nq equal to 0, 1, or 2, the load can be set to work as a constant power, constant current, or constant impedance, respectively.

## Mask parameters

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-798f9d5cfd411a8365b9d4eca313b4cbb74f55b2%2Fimage%20(1149).png?alt=media" alt="" width="431"><figcaption></figcaption></figure>

| Parameter                    | Description                                          |
| ---------------------------- | ---------------------------------------------------- |
| **Base active power (P0)**   | 1-phase active power under nominal conditions (kW)   |
| **Base reactive power (Q0)** | 1-phase reactive power under nominal conditions (kW) |
| **V0**                       | Base value for PU conversion (kV)                    |
| **F0**                       | Base value for PU conversion (Hz)                    |
| **Np**                       | Active power – Voltage variation coefficient         |
| **Nq**                       | Reactive power – Voltage variation coefficient       |
| **Kpf**                      | Active power – Frequency variation coefficient       |
| **Kqf**                      | Reactive power – Frequency variation coefficient     |

## Conserving ports

| Port       | Description                                            |
| ---------- | ------------------------------------------------------ |
| **Net\_1** | Network connection (supports only 3-phase connections) |
| **Net\_3** | Network connection (supports only 1-phase connections) |

## Inputs

This block has no inputs.

## Outputs

This block has no outputs.

## Signals available for monitoring and external I/O connections (via sensors form)

All block inputs and outputs are available as signals for monitoring and for external I/O connections.

Additional signals are also available and are listed below with their descriptions.

| Signal   | Description                                      |
| -------- | ------------------------------------------------ |
| **F**    | Estimated current at the point of connection     |
| **Lout** | Effective inductance or Capacitance              |
| **Rout** | Effective resistance                             |
| **Vrms** | Estimated RMS voltage at the point of connection |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/library-blocks-reference/network-loads/pq-load-1-ph-series.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
