> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/library-blocks-reference/network-sources/ac-i-source.md).

# AC I Source

## Description

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-aef7e88dbd9b35ebcc152d8ec749b6be3cffcf50%2Fimage%20(1150).png?alt=media" alt="" width="104"><figcaption></figcaption></figure>

The **AC I Source** block, located in the **Network Sources** library, represents a single- or three-phase AC current source with a parallel RLC impedance.

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-23f36f72e928abdd9379d646c834eaac6c61d34c%2Fimage%20(1152).png?alt=media" alt=""><figcaption><p>Three-phase AC current source with a parallel RLC impedance</p></figcaption></figure>

The current source always includes a parallel impedance composed of R, L, and C elements connected either in series or in parallel.

{% hint style="info" %}
By default, the voltage/current source block operates in single-phase mode. When it is connected to a three-phase bus signal, it automatically switches to three-phase operation.
{% endhint %}

## Mask parameters

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-082a7e2a34bacf8825c59c18036b9e4f7dc0bc42%2Fimage%20(1151).png?alt=media" alt=""><figcaption></figcaption></figure>

<table><thead><tr><th width="246">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Starting mode (Slow/Fast)</strong></td><td>If <strong>Fast</strong>, the source is immediately activated or deactivated.<br>If <strong>Slow</strong>, when the source is activated, the amplitude increases linearly from zero to the steady-state value. When the source is deactivated, the amplitude decreases linearly from the steady-state value to zero (see captures below).</td></tr><tr><td><strong>RLC type</strong></td><td>Series (series R, L, C) or parallel (parallel R, L, C).</td></tr><tr><td><strong>Base Power (total)</strong></td><td>Base power for three phase.</td></tr><tr><td><strong>Base voltage (rmsLN)</strong></td><td>Base voltage phase to ground.</td></tr><tr><td><strong>Base Frequency</strong></td><td>Base frequency (Hz)</td></tr><tr><td><strong>Amplitude (peak)</strong></td><td>Peak value of the source current amplitude (A or pu) for each phase.</td></tr><tr><td><strong>Angle</strong></td><td>Angle of phase A (degrees). The current source is always balanced and in positive sequence.</td></tr><tr><td><strong>R</strong></td><td>Resistance value (ohms or pu).</td></tr><tr><td><strong>L</strong></td><td>Inductance value (Henry or pu).</td></tr><tr><td><strong>C</strong></td><td>Capacitor value (Farad or pu).</td></tr></tbody></table>

{% hint style="info" %}
**SI or pu units**

* **SI:** Specifies the values of the RLC elements, voltage, current or frequency in international units (ohm, henry, farad, volt, ampere and hertz);
* **pu:** Specifies the values of the RLC elements, voltage, current or frequency in pu;
  {% endhint %}

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-05403a39c2b5fa929006d35cf71e02af8af7865d%2Ffast_slow_mode.jpg?alt=media" alt=""><figcaption><p>a)fast mode b) slow mode</p></figcaption></figure>

## Conserving ports

| Port               | Description                                                                                    |
| ------------------ | ---------------------------------------------------------------------------------------------- |
| **Net\_1, Net\_2** | The current source injects a current from one bus (port) to another (port), without grounding. |

## Inputs

| Input       | Description                          |
| ----------- | ------------------------------------ |
| **I input** | The current source amplitude signal. |

## Outputs

This block has no outputs.

## Signals available for monitoring and external I/O connections (via sensors form)

All block inputs and outputs are available as signals for monitoring and for external I/O connections.

Additional signals are also available and are listed below with their descriptions.

| Signal            | Description                |
| ----------------- | -------------------------- |
| I(a, b, c)\_label | Current source signal (A). |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/library-blocks-reference/network-sources/ac-i-source.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
