> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/library-blocks-reference/network-sources/controlled-v-source-3-ph.md).

# Controlled V Source, 3-ph

## Description

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-4daf29908f47766b62d57964e9fa59fc96201094%2Fimage%20(380).png?alt=media" alt=""><figcaption></figcaption></figure>

The **Controlled Voltage Source** block, located in the **Network Sources** library, represents a three-phase AC source with a configurable RLC impedance connected in series or in parallel. It outputs to the network the signal received on its control input, and is used to amplify or inject a signal into the network. The source is referenced to ground and exposes a single network connector.

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-26c05bd14f4e1aab6e673fe7103c57caea83bef9%2Fimage%20(383).png?alt=media" alt="" width="223"><figcaption></figcaption></figure>

## Mask parameters

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-0828b6d5916cac66665fabcf62b1784a743c4892%2Fimage%20(375).png?alt=media" alt="" width="439"><figcaption></figcaption></figure>

| Parameter               | Description                                            |
| ----------------------- | ------------------------------------------------------ |
| **RLC connection type** | Series (series R, L, C) or parallel (parallel R, L, C) |
| **R**                   | Resistance value (ohms)                                |
| **L**                   | Inductance value (H)                                   |
| **C**                   | Capacitance value (F)                                  |

## Conserving ports

| Port       | Description                                                                                         |
| ---------- | --------------------------------------------------------------------------------------------------- |
| **Net\_1** | The voltage source has only one network connector (port), since is always referenced to the ground. |

## Inputs

| Input                    | Description                   |
| ------------------------ | ----------------------------- |
| V input (voltage source) | The voltage amplitude signal. |

## Outputs

| Output                        | Description                                 |
| ----------------------------- | ------------------------------------------- |
| **I output (voltage source)** | The current signal flowing from the source. |

## Signals available for monitoring and external I/O connections (via sensors form)

All block inputs and outputs are available as signals for monitoring and for external I/O connections.

Additional signals are also available and are listed below with their descriptions.

| Signal              | Description                            |
| ------------------- | -------------------------------------- |
| **I(a,b,c)\_label** | Measured current (voltage source) (A). |
| **V(a,b,c)\_label** | Source voltage (V).                    |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/library-blocks-reference/network-sources/controlled-v-source-3-ph.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
