> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/library-blocks-reference/network-switches-and-breakers/thyristor-back-to-back.md).

# Thyristor Back to Back

## Description

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-5e4163d5af3ed8f3ba95b07f354f5942182e0e00%2Fimage%20(1091).png?alt=media" alt="" width="132"><figcaption></figcaption></figure>

The **Back-to-Back Thyristor** block, located in the **Network Switches and Breakers** library, models two identical thyristors connected in anti-parallel to allow current flow in either direction when a gate current of either polarity is applied between the gate and the main terminal.

The model includes forward-bias threshold, forward and reverse breakover voltages, blocking current, snubber elements, holding current, and on/off resistance. An optional precision function compensates for state-switching timing errors due to digital implementation, as a function of the simulation time step. The turnoff time Tq is the interval between the anode current reaching zero and the thyristor regaining its ability to withstand a positive voltage without turning on. The model can be controlled by external signals and supports an external precision delay D.

## Mask parameters

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-98db4e13a27cbba4978bcaab77ce599fcaae13b9%2Fthyristor_btb.jpg?alt=media" alt="" width="563"><figcaption></figcaption></figure>

{% tabs %}
{% tab title="General" %}

<table><thead><tr><th width="201">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Vmin</strong></td><td>Forward voltage drop (V) [0, 1e12].</td></tr><tr><td><strong>Ropen</strong></td><td>Open-state resistance (ohm) [0, 1e12].</td></tr><tr><td><strong>Rclose</strong></td><td>Closed-state resistance (ohm) [0, 1e12].</td></tr><tr><td><strong>Rsnubber</strong></td><td>Snubber resistance (ohm) [0, 1e12].</td></tr><tr><td><strong>Csnubber</strong></td><td>Snubber capacitance (F) [0, 1e12].</td></tr><tr><td><strong>Control type</strong></td><td><strong>External input pins</strong>: schematic control signal; the received integer is converted to a binary string where each digit corresponds to a phase.<br><strong>External input sensors</strong>: simulator digital inputs.</td></tr></tbody></table>
{% endtab %}

{% tab title="Advanced" %}

<table><thead><tr><th width="201">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Fail reset</strong></td><td>Enable or disable fail reset.</td></tr><tr><td><strong>Precision valve</strong></td><td>Enable—recalculates the state-switch command using the exact time between steps (as a percentage of the time step). Disable—does not use precision valve.</td></tr><tr><td><strong>Imin</strong></td><td>Holding current (A) [0, 1e12].</td></tr><tr><td><strong>Tq</strong></td><td>Thyristor turnoff time (s) [0, 1e12].</td></tr><tr><td><strong>Fbov</strong></td><td>Forward breakover voltage (V) [0, 1e12].</td></tr><tr><td><strong>Rbov</strong></td><td>Reverse breakover voltage (V) [0, 1e12].</td></tr></tbody></table>
{% endtab %}
{% endtabs %}

## Conserving ports

| Port       | Description        |
| ---------- | ------------------ |
| **Net\_1** | Network connection |
| **Net\_2** | Network connection |

## Inputs

| Input | Description                         |
| ----- | ----------------------------------- |
| **D** | Delay used for precision valve (s). |
| **P** | Binary coded firing pulses.         |

## Outputs

This block has no outputs.

## Signals available for monitoring and external I/O connections (via sensors form)

All block inputs and outputs are available as signals for monitoring and for external I/O connections.

Additional signals are also available and are listed below with their descriptions.

| Signal         | Description                                |
| -------------- | ------------------------------------------ |
| **FailSig**    | Fail reset signal.                         |
| **I**          | Diode current (A).                         |
| **Isw**        | Switch current (A).                        |
| **Delay**      | Delay due to forward voltage drop (s).     |
| **Delay12**    | Delay in forward thyristor mode (s).       |
| **Delay21**    | Delay in anti-parallel thyristor mode (s). |
| **DelayExt12** | Delay for external trigger (s).            |
| **DelayExt21** | Delay for external trigger (s).            |
| **Cmd12**      | Forward signal state command.              |
| **Cmd21**      | Anti-parallel signal state command.        |
| **CmdExt12**   | Signal state external command.             |
| **CmdExt21**   | Signal state external command.             |
| **State12**    | Forward thyristor state.                   |
| **State21**    | Anti-parallel thyristor state.             |

{% hint style="info" %}
The **suffixes “12” and “21”** denote the forward (positive to negative) and anti-parallel (negative to positive) thyristor states, respectively. The positive terminal is the one closest to the input pin. In the default (not flipped or rotated) icon, the positive terminal is at the top.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/library-blocks-reference/network-switches-and-breakers/thyristor-back-to-back.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
