> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/library-blocks-reference/network-transformers/2-winding-3-phase-series-series-linear-transformer.md).

# 2-Winding 3-Phase Series/Series Linear Transformer

## Description

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-a0390c9a8d4a4768c48523d58f61018cf8a4812d%2Fimage%20(1166).png?alt=media" alt=""><figcaption></figcaption></figure>

The **2‑Winding Series/Series Linear Transformer** block, located in the **Network Transformers** library, models a transformer with series-connected windings for use in series devices. Series transformers share the same construction as other three‑phase transformers. Their series connection makes them suitable for devices such as DVRs, active filters, and UPFCs. This linear model is appropriate when saturation modeling is not required, which reduces computation time.

## Mask parameters

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-45393d3fbc040ba1712096d0081934430f295c6c%2Fimage%20(1167).png?alt=media" alt="" width="563"><figcaption></figcaption></figure>

<table><thead><tr><th width="229">Parameter</th><th>Description</th></tr></thead><tbody><tr><td><strong>Description</strong></td><td>Use this field to add all kinds of information about the component</td></tr><tr><td><strong>Base primary/secondary winding voltage (rmsLL)</strong></td><td>Base value for PU conversion (kV) Voltage expressed in kV rms LL This base voltage and nominal voltage will change, if the corresponding winding connection switches between delta and Y.</td></tr><tr><td><strong>Base power (total)</strong></td><td>Base value for PU conversion (MVA)</td></tr><tr><td><strong>Base frequency</strong></td><td>Base value for PU conversion (Hz)</td></tr><tr><td><strong>Rm</strong></td><td>Equivalent resistance of iron losses of the magnetic circuit (Ω)</td></tr><tr><td><strong>Lm</strong></td><td>Magnetization inductance (H)</td></tr><tr><td><strong>Voltage (rmsLL)</strong></td><td>Rated voltage of the winding (kV) Y connections: Voltage expressed in kV rms LL Delta connections: Voltage expressed in kV rms LL</td></tr><tr><td><strong>R1, R2</strong></td><td>Leakage resistance of the winding (Ω)</td></tr><tr><td><strong>L1, L2</strong></td><td>Leakage inductance of the winding (H)</td></tr></tbody></table>

## Conserving ports

<table><thead><tr><th width="200">Port</th><th>Description</th></tr></thead><tbody><tr><td><strong>Net_1+</strong></td><td>Positive primary winding connection (supports only 1-phase connections)</td></tr><tr><td><strong>Net_1-</strong></td><td>Negative primary winding connection (supports only 1-phase connections)</td></tr><tr><td><strong>Net_2+</strong></td><td>Positive secondary winding connection (supports only 1-phase connections)</td></tr><tr><td><strong>Net_2-</strong></td><td>Negative secondary winding connection (supports only 1-phase connections)</td></tr></tbody></table>

## Inputs

This block has no inputs.

## Outputs

This block has no outputs.

## Signals available for monitoring and external I/O connections (via sensors form)

All block inputs and outputs are available as signals for monitoring and for external I/O connections.

Additional signals are also available and are listed below with their descriptions.

<table><thead><tr><th width="220">Signal</th><th>Description</th></tr></thead><tbody><tr><td><strong>ILMAG(a,b,c)</strong></td><td>Magnetization current for each phase (A)</td></tr><tr><td><strong>IPRIM(a,b,c)</strong></td><td>Primary current for each phase (A)</td></tr><tr><td><strong>ISEC2(a,b,c)</strong></td><td>Secondary current for each phase (A)</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/library-blocks-reference/network-transformers/2-winding-3-phase-series-series-linear-transformer.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
