> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/model-and-simulation/edit-a-model-schematic/navigate-around-a-schematic/common-keyboard-shortcuts.md).

# Common Keyboard Shortcuts

## Keyboard Shortcuts

| Command                       | Schematic          | Symbol Editor    |
| ----------------------------- | ------------------ | ---------------- |
| **Add pins**                  | --                 | CTRL + E         |
| **Auto-create symbol**        | --                 | CTRL + J         |
| **Bring to front**            | --                 | CTRL + B         |
| **Close**                     | CTRL + W           | CTRL + W         |
| **Copy**                      | CTRL + C           | CTRL + C         |
| **Create sub-circuit block**  | CTRL + Shift + Q   | --               |
| **Cut**                       | CTRL + X           | CTRL + X         |
| **Design attributes**         | CTRL + Shift + D   | --               |
| **Draw bundle**               | CTRL + Shift + B   | --               |
| **Draw general signal**       | CTRL + Alt + Space |                  |
| **Draw diagonal signal**      | CTRL + Alt + D     |                  |
| **Draw 3-phase bus**          | CTRL + Alt + 3     |                  |
| **Draw phase A**              | CTRL + Alt + A     |                  |
| **Draw phase B**              | CTRL + Alt + B     |                  |
| **Draw phase C**              | CTRL + Alt + C     |                  |
| **Draw signal**               | CTRL + Shift + S   | --               |
| **Duplicate**                 | CTRL + D           | CTRL + D         |
| **Enlarge**                   | CTRL + Shift + E   | CTRL + Shift + E |
| **Export**                    | F2                 | --               |
| **Find**                      | CTRL + F           | --               |
| **Go to selected**            | CTRL + G           | --               |
| **Properties**                | CTRL + I           | --               |
| **Group**                     | --                 | CTRL + G         |
| **Magnify**                   | CTRL + Shift + M   | --               |
| **Move to grid**              | --                 | CTRL + Shift + G |
| **New**                       | CTRL + N           | CTRL + N         |
| **New breakout**              | CTRL + B           | --               |
| **Normal size**               | CTRL + Shift + N   | CTRL + Shift + N |
| **Normal size**               | Home               | --               |
| **Open**                      | CTRL + O           | CTRL + O         |
| **Open/close breaker**        | Alt + click        | --               |
| **Orientation for device**    | CTRL + Q           | --               |
| **Part attributes**           | --                 | CTRL + I         |
| **Paste**                     | CTRL + V           | CTRL + V         |
| **Paste special**             | CTRL + Shift + V   | --               |
| **Pop up to parent circuit**  | CTRL + Shift + U   | --               |
| **Print**                     | CTRL + P           | --               |
| **Push info sub-circuit**     | CTRL + Shift + I   | --               |
| **Redo**                      | CTRL + Shift + Z   | --               |
| **Redraw**                    | End                | --               |
| **Reduce**                    | CTRL + Shift + R   | CTRL + Shift + R |
| **Reduce to fit**             | CTRL + Shift + F   | CTRL + Shift + F |
| **Reduce to fit**             | CTRL + Home        | --               |
| **Rotate left**               | CTRL + R           | --               |
| **Rotate right**              | CTRL + Alt + R     | --               |
| **Save**                      | CTRL + S           | CTRL + S         |
| **Save as**                   | CTRL + Shift + A   | --               |
| **Select all**                | CTRL + A           | CTRL + A         |
| **Send to back**              | --                 | CTRL + Shift + B |
| **Sub-circuit and part type** | --                 | CTRL + Q         |
| **Undo**                      | CTRL + Z           | CTRL + Z         |
| **Text font**                 | --                 | CTRL + T         |
| **Ungroup**                   | --                 | CTRL + U         |
| **Zap**                       | CTRL + H           | --               |
| **Zoom in/out**               | CTRL + Mouse wheel | --               |

## Other Key Usage <a href="#other-key-usage" id="other-key-usage"></a>

<table><thead><tr><th width="193.33331298828125">Key</th><th>Function</th></tr></thead><tbody><tr><td><strong>Delete</strong></td><td>Delete selected items</td></tr><tr><td><strong>Arrow keys</strong></td><td>Flip and rotate items while placing a device or pasting</td></tr><tr><td><strong>Arrow keys</strong></td><td>Move selected items in small increments</td></tr><tr><td><strong>CTRL or Shift or Alt</strong></td><td>Path controls over signal lines while drawing signals. Press these keys after starting to draw with the mouse pointer.</td></tr><tr><td><strong>CTRL + Shift</strong></td><td>Control device alignment while placing devices. Press these keys while a device is stuck to the mouse pointer.</td></tr><tr><td><strong>CTRL + Tab</strong></td><td>To move between design windows in the main HYPERSIM window.</td></tr><tr><td><strong>Page Up (PgUp)</strong></td><td>Scroll up</td></tr><tr><td><strong>CTRL + Page Up</strong></td><td>Scroll left</td></tr><tr><td><strong>Page Down (PgDn)</strong></td><td>Scroll down</td></tr><tr><td><strong>CTRL + Page Down</strong></td><td>Scroll right</td></tr><tr><td><strong>Spacebar or ESC</strong></td><td>Exits and moves back to the normal pointer when a signal pointer is active. Also stops the sticky action of placed or duplicated objects. If you are working with the text tool pointer, then you must first exit the text then click the space bar. To exit the text, click on a blank space in the design.</td></tr></tbody></table>

If you hold down the CTRL button while holding down and moving the mouse pointer, you get a quick way for navigating around a drawing.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/model-and-simulation/edit-a-model-schematic/navigate-around-a-schematic/common-keyboard-shortcuts.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
