> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/model-and-simulation/import-models-from-external-software-or-code/import-from-emtp/compatible-components.md).

# Compatible Components

## Control <a href="#control" id="control"></a>

| Component in EMTP       | Block in HYPERSIM                      |
| ----------------------- | -------------------------------------- |
| comparator              | comparator                             |
| comparator (hysteresis) | comparator (hysteresis)                |
| constant                | Constant, float                        |
| deadband                | deadband                               |
| detector                | Rising edge detector                   |
| f(1/z)                  | Discrete Laplace transform             |
| f(1/z) with limits      | Discrete Laplace transform with limits |
| f(s)                    | Laplace transform                      |
| f(s) with limits        | Laplace transform with limits          |
| f(u)                    | Floating point constant                |
| gain                    | Gain                                   |
| hold                    | hold                                   |
| hold (t0)               | hold (t0)                              |
| input selector          | input selector                         |
| integral                | integral                               |
| integral with limits    | integral with limits                   |
| limiter                 | limiter                                |
| loss                    | Gain                                   |
| manual\_switch          | manual\_switch                         |
| output selector         | output selector                        |
| sampler                 | Direct sampler                         |
| signal generator        | Floating point constant                |
| sum                     | Weighted sum with gain                 |
| sum (weighted)          | Weighted sum with gain                 |
| table function          | Floating point constant                |
| timer                   | Gain                                   |
| tracker                 | Minimum sampler                        |
| truth table function    | Floating point constant                |

## Control functions <a href="#control-functions" id="control-functions"></a>

| Component in EMTP            | Block in HYPERSIM            |
| ---------------------------- | ---------------------------- |
| delayed pulse on rising-edge | delayed pulse on rising-edge |
| filter (LP-HP-BP-BS)         | filter (LP-HP-BP-BS)         |
| in-range detector            | in-range detector            |
| PI controller, dynamic       | PI controller, dynamic       |
| PI controller, fixed         | PI controller, fixed         |
| PID controller, dynamic      | PID controller, dynamic      |
| PID controller, fixed        | PID controller, fixed        |
| PLL                          | PLL                          |
| PLL, ideal                   | PLL, ideal                   |
| PWM, ramp reference          | PWM, ramp reference          |
| PWM, triangular reference    | PWM, triangular reference    |
| rising-instant detector      | rising-instant detector      |
| time-controlled pulse        | time-controlled pulse        |

## DC <a href="#dc" id="dc"></a>

| Component in EMTP             | Block in HYPERSIM             |
| ----------------------------- | ----------------------------- |
| 12-pulse blocking             | 12-pulse blocking             |
| 12-pulse commutation v        | 12-pulse commutation v        |
| 12-pulse doubling             | 12-pulse doubling             |
| 12-pulse fire                 | 12-pulse fire                 |
| 12-pulse fire, double pulsing | 12-pulse fire, double pulsing |
| 12-pulse generator            | 12-pulse generator            |
| 6 pulse Bridge                | 6 pulse Bridge                |
| 6-pulse blocking              | 6-pulse blocking              |
| 6-pulse commutation v         | 6-pulse commutation v         |
| 6-pulse doubling              | 6-pulse doubling              |
| 6-pulse fire                  | 6-pulse fire                  |
| 6-pulse fire, double pulsing  | 6-pulse fire, double pulsing  |
| 6-pulse generator             | 6-pulse generator             |

## Flip-flops <a href="#flip-flops" id="flip-flops"></a>

| Component in EMTP              | Block in HYPERSIM              |
| ------------------------------ | ------------------------------ |
| D, falling clock               | D, falling clock               |
| D, falling clock, full         | D, falling clock, full         |
| D, rising clock                | D, rising clock                |
| D, rising clock, full          | D, rising clock, full          |
| D, unclocked                   | D, unclocked                   |
| D, unclocked, full             | D, unclocked, full             |
| J-K, falling clock             | J-K, falling clock             |
| J-K, falling clock, full       | J-K, falling clock, full       |
| J-K, rising clock              | J-K, rising clock              |
| J-K, rising clock, full        | J-K, rising clock, full        |
| J-K, unclocked                 | J-K, unclocked                 |
| J-K, unclocked, full           | J-K, unclocked, full           |
| S-R ideal, falling clock       | S-R ideal, falling clock       |
| S-R ideal, falling clock, full | S-R ideal, falling clock, full |
| S-R ideal, rising clock        | S-R ideal, rising clock        |
| S-R ideal, rising clock, full  | S-R ideal, rising clock, full  |
| S-R ideal, unclocked           | S-R ideal, unclocked           |
| S-R nand, falling clock        | S-R nand, falling clock        |
| S-R nand, falling clock, full  | S-R nand, falling clock, full  |
| S-R nand, rising clock         | S-R nand, rising clock         |
| S-R nand, rising clock, full   | S-R nand, rising clock, full   |
| S-R nand, unclocked            | S-R nand, unclocked            |
| S-R nand, unclocked, full      | S-R nand, unclocked, full      |
| S-R nor, falling clock         | S-R nor, falling clock         |
| S-R nor, falling clock, full   | S-R nor, falling clock, full   |
| S-R nor, rising clock          | S-R nor, rising clock          |
| S-R nor, rising clock, full    | S-R nor, rising clock, full    |
| S-R nor, unclocked             | S-R nor, unclocked             |
| S-R nor, unclocked, full       | S-R nor, unclocked, full       |
| S-R ideal, unclocked, full     | S-R ideal, unclocked, full     |
| T, falling clock               | T, falling clock               |
| T, falling clock, full         | T, falling clock, full         |
| T, rising clock                | T, rising clock                |
| T, rising clock, full          | T, rising clock, full          |
| T, unclocked                   | T, unclocked                   |
| T, unclocked, full             | T, unclocked, full             |
| universal                      | universal                      |

## Lines <a href="#lines" id="lines"></a>

| Component in EMTP      | Block in HYPERSIM          |
| ---------------------- | -------------------------- |
| Cable Data             | Cable Data                 |
| CP double circuit line | Constant param, 6-ph       |
| CP line/cable 3-phase  | Constant param, 3-ph       |
| Line Data              | Line Data                  |
| WB line/cable fitter   | Wideband line/cable fitter |

## Load models <a href="#load-models" id="load-models"></a>

| Component in EMTP | Block in HYPERSIM                   |
| ----------------- | ----------------------------------- |
| PQ load (RLC)     | Grounded series parallel RLC filter |

## Meters <a href="#meters" id="meters"></a>

| Component in EMTP              | Block in HYPERSIM              |
| ------------------------------ | ------------------------------ |
| 012 Sequences : Current        | 012 Sequences : Current        |
| 012 Sequences : Voltage        | 012 Sequences : Voltage        |
| Current i(t)                   | I measurement, 1ph             |
| Current i(t), 3-phase          | I measurement, 3ph             |
| Positive sequence Current      | Positive sequence Current      |
| Positive sequence Voltage      | Positive sequence Voltage      |
| Power : P(t)                   | Power : P(t)                   |
| Power : P(t) and Q(t)          | Power : P(t) and Q(t)          |
| Power : P(t) and Q(t), 3-phase | Power : P(t) and Q(t), 3-phase |
| Power : P(t), 3-phase          | Power : P(t), 3-phase          |
| Power : Q(t)                   | Power : Q(t)                   |
| Power : Q(t), 3-phase          | Power : Q(t), 3-phase          |
| RMS Current                    | RMS Current                    |
| RMS Voltage                    | RMS Voltage                    |
| Voltage v(t)                   | V measurement, 1ph             |
| Voltage v(t), 3-phase          | V measurement, 3ph             |
| Zero sequence Current          | Zero sequence Current          |
| Zero sequence Voltage          | Zero sequence Voltage          |

## Non-linear <a href="#non-linear" id="non-linear"></a>

| Component in EMTP | Block in HYPERSIM  |
| ----------------- | ------------------ |
| R nonlinear       | Series nonlinear R |

## Phasors <a href="#phasors" id="phasors"></a>

| Component in EMTP         | Block in HYPERSIM         |
| ------------------------- | ------------------------- |
| instantaneous to phasor   | instantaneous to phasor   |
| instantaneous to polar    | instantaneous to polar    |
| instantaneous to xy       | instantaneous to xy       |
| phasor add                | phasor add                |
| phasor angle difference   | phasor angle difference   |
| phasor angle sum          | phasor angle sum          |
| phasor conjugate          | phasor conjugate          |
| phasor conjugate multiply | phasor conjugate multiply |
| phasor divide             | phasor divide             |
| phasor magnitude product  | phasor magnitude product  |
| phasor magnitude ratio    | phasor magnitude ratio    |
| phasor multiply           | phasor multiply           |
| phasor resize             | phasor resize             |
| phasor rotate             | phasor rotate             |
| phasor subtract           | phasor subtract           |
| phasor to frame           | phasor to frame           |
| phasor to polar           | phasor to polar           |
| phasor to x               | phasor to x               |
| phasor to xy              | phasor to xy              |
| phasor to y               | phasor to y               |
| polar conjugate           | polar conjugate           |
| polar conjugate multiply  | polar conjugate multiply  |
| polar divide              | polar divide              |
| polar multiply            | polar multiply            |
| polar resize              | polar resize              |
| polar rotate              | polar rotate              |
| polar to phasor           | polar to phasor           |
| polar to xy               | polar to xy               |
| polar to xy (3-phase)     | polar to xy (3-phase)     |
| xy add                    | xy add                    |
| xy resize                 | xy resize                 |
| xy rotate                 | xy rotate                 |
| xy subtract               | xy subtract               |
| xy to phasor              | xy to phasor              |
| xy to polar               | xy to polar               |
| xy to polar (3-phase)     | xy to polar (3-phase)     |
| xy to polar (detailed)    | xy to polar (detailed)    |

## Pseudo-devices <a href="#pseudo-devices" id="pseudo-devices"></a>

| Component in EMTP        | Block in HYPERSIM               |
| ------------------------ | ------------------------------- |
| bus-to-abc               | bus-to-abc                      |
| Control signal connector | Control signal conector         |
| Control\_IN              | Control\_IN                     |
| Control\_OUT             | Control\_OUT                    |
| Neutral                  | Neutral                         |
| Node connector           | Node connector, 1ph             |
| Node connector 3-phase   | Node connector, 3-ph            |
| Page Conn Bundle         | Page Connector, control bundle  |
| Page Conn output signal  | Page Connector, control output  |
| Page Conn Power Signal   | Page Connector, Power Signal    |
| Port\_Bundle             | Subcircuit port, Bundle         |
| Port\_In                 | Subcircuit port, control input  |
| Port\_Out                | Subcircuit port, control output |
| Port\_Power east         | Subcircuit port, power signal   |
| Port\_Power west         | Subcircuit port, power signal   |

## RLC branches <a href="#rlc-branches" id="rlc-branches"></a>

| Component in EMTP     | Block in HYPERSIM |
| --------------------- | ----------------- |
| Ground                | Ground            |
| PI line 3-phase       | PI section, 3ph   |
| RL coupled            | Series coupled RL |
| RLC                   | Series RLC        |
| RLC : C non polarized | Series C          |
| RLC : C polarized     | Series C          |
| RLC : L               | Series L          |
| RLC : L-C             | Series LC         |
| RLC : R               | Series R          |
| RLC : R-L             | Series R-L        |
| RLC : R-L-C           | Series R-L-C      |

## Switches <a href="#switches" id="switches"></a>

| Component in EMTP          | Block in HYPERSIM     |
| -------------------------- | --------------------- |
| Controlled 3-phase breaker | Circuit breaker, 3-ph |

## Transformations <a href="#transformations" id="transformations"></a>

| Component in EMTP             | Block in HYPERSIM             |
| ----------------------------- | ----------------------------- |
| 3-ph to dq0                   | 3-ph to dq0                   |
| 3-ph to pos sequence (polar)  | 3-ph to pos sequence (polar)  |
| 3-ph to pos sequence (xy)     | 3-ph to pos sequence (xy)     |
| 3-ph to sequences (polar)     | 3-ph to sequences (polar)     |
| 3-ph to sequences (xy)        | 3-ph to sequences (xy)        |
| 3-ph to zero sequence (polar) | 3-ph to zero sequence (polar) |
| 3-ph to zero sequence (xy)    | 3-ph to zero sequence (xy)    |
| average (period)              | average (period)              |
| dq0 to 3-ph                   | dq0 to 3-ph                   |
| harmonic (xy)                 | harmonic (xy)                 |
| harmonic (xy, polar, rms)     | harmonic (xy, polar, rms)     |
| harmonic THD                  | harmonic THD                  |
| ic for first period           | ic for first period           |
| integral (period)             | integral (period)             |
| power P                       | power P                       |
| power p(t)                    | power p(t)                    |
| power Q                       | power Q                       |
| power q(t)                    | power q(t)                    |
| rms                           | rms                           |
| sequences to 3-ph (polar)     | sequences to 3-ph (polar)     |
| sequences to 3-ph (xy)        | sequences to 3-ph (xy)        |

## Transformers <a href="#transformers" id="transformers"></a>

| Component in EMTP      | Block in HYPERSIM     |
| ---------------------- | --------------------- |
| ideal unit             | 2 winding, 1-ph ideal |
| Nonideal unit          | Nonideal unit         |
| YgDD nameplate input O | 3 winding, w/sat      |
| ZigZag grounding       | ZigZag grounding      |
| ZigZag grounding no g  | ZigZag grounding no g |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/model-and-simulation/import-models-from-external-software-or-code/import-from-emtp/compatible-components.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
