> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/model-and-simulation/optimize-the-model/use-parameter-generators/clarke-concordia-and-park-transformations.md).

# Clarke, Concordia and Park Transformations

## Three-Phase System <a href="#three-phase-system" id="three-phase-system"></a>

Consider a direct three-phase system given by:

$$
s\_a(t)=S\sqrt{2}sin\omega t \\\[8pt]
s\_b(t)=S\sqrt{2}sin(\omega t - 2\pi/3) \\\[8pt]
s\_c(t)=S\sqrt{2}sin(\omega t + 2\pi/3)
$$

{% columns %}
{% column %}

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-5c8b204a15781a9f11844746e3e6c3bb332f9531%2Fimage%20(1039).png?alt=media" alt="" width="480"><figcaption><p>Three-phase system in time domain</p></figcaption></figure>
{% endcolumn %}

{% column %}

<figure><img src="https://3623212549-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FLxgTpoh7kyPmQ5vuyqD7%2Fuploads%2Fgit-blob-2d161356ab029b9bf421454a36ff489c6501d560%2Fimage%20(1)%20(2).png?alt=media" alt="" width="313"><figcaption></figcaption></figure>
{% endcolumn %}
{% endcolumns %}

Since the sum of the three phase quantities in a balanced three-phase system is equal to zero, one equation is redundant. Therefore, the system can be represented using only two independent variables. To achieve this, the original three-phase quantities are transformed into two orthogonal components, which are linearly independent. Two commonly used transformations for this purpose are the **Clarke transformation** and the **Concordia transformation**.

## Transformations from (a,b,c) to (α, β) <a href="#transformations-from-a-b-c-to-a-v" id="transformations-from-a-b-c-to-a-v"></a>

### Clarke Transformation <a href="#clarke-transformation" id="clarke-transformation"></a>

Clarke transformation applied to the three-phase system leads to:

$$
\left\[\begin{array}{c}{s\_{\alpha}} \ {s\_{\beta}} \ {s\_{o}}\end{array}\right]=\frac{2}{3}\left\[\begin{array}{ccc}{1} & {-1 / 2} & {-1 / 2} \ {0} & {\sqrt{3} / 2} & {-\sqrt{3} / 2} \ {1 / 2} & {1 / 2} & {1 / 2}\end{array}\right]\left\[\begin{array}{c}{s\_{a}} \ {s\_{b}} \ {s\_{c}}\end{array}\right]
$$

Therefore,

$$
s\_{\alpha} =S \sqrt{2} \sin \omega t=s\_{a} \\\[8pt]
s\_{\beta} =-S \sqrt{2} \cos \omega t=S \sqrt{2} \sin (\omega t-\pi / 2)
$$

From which the inverse of Clarke transformation is computed as:

$$
s\_{a} =s\_{\alpha} \\\[8pt]
s\_{b} =-\frac{1}{2} s\_{\alpha}+\frac{\sqrt{3}}{2} s\_{\beta}
$$

#### Properties of Clarke Transformation <a href="#properties-of-clarke-transformation" id="properties-of-clarke-transformation"></a>

* This transformation keeps the amplitude invariant, hence the amplitudes of *s*<sub>*a*</sub> and *s*<sub>*α*</sub> are both equal to *S√2*. However, the power is variant
* The determinant of this transformation is *2/(3√3)*, hence this is not a rotation
* SPS solver uses this transformation

### Concordia Transformation <a href="#concordia-transformation" id="concordia-transformation"></a>

$$
\left\[\begin{array}{c}{s\_{\alpha}} \ {s\_{\beta}} \ {s\_{o}}\end{array}\right]=\sqrt{\frac{2}{3}}\left\[\begin{array}{ccc}{1} & {-1 / 2} & {-1 / 2} \ {0} & {\sqrt{3} / 2} & {-\sqrt{3} / 2} \ {1 / \sqrt{2}} & {1 / \sqrt{2}} & {1 / \sqrt{2}}\end{array}\right]\left\[\begin{array}{c}{s\_{a}} \ {s\_{b}} \ {s\_{c}}\end{array}\right]
$$

Therefore,

$$
s\_{\alpha} =S \sqrt{3} \sin \omega t \\\[8pt]
s\_{\beta} =-S \sqrt{3} \cos \omega t=S \sqrt{3} \sin (\omega t-\pi / 2)
$$

#### Properties of Concordia Transformation <a href="#properties-of-concordia-transformation" id="properties-of-concordia-transformation"></a>

* This transformation changes the amplitude but keeps the power invariant
* The determinant of this transformation is 1. Additionally, columns are orthogonal and have unity-norm. Consequently, this is a rotation and the inverse is nothing but the transpose
* SSN solver uses this transformation

## Transformations from (α, β) to (d,q) <a href="#transformations-from-a-v-to-d-q" id="transformations-from-a-v-to-d-q"></a>

### Rotation of Angle -θ <a href="#rotation-of-angle-th" id="rotation-of-angle-th"></a>

The **transformation** is used to convert quantities from the stationary (α,β) reference frame to the rotating (d,q) reference frame. Its main objective is to eliminate the time-varying term ωt, thereby transforming sinusoidal signals into constant (time-invariant) quantities s<sub>d</sub> and s<sub>q</sub> under steady-state conditions.

Considering that the three-phase system shown in Fig. 2 rotates counterclockwise at an angular velocity ω rad/s, the reference frame must be rotated by an angle θ=−ωt. This rotation aligns the (d,q) frame with the rotating vector, effectively canceling the angular dependence and yielding time-invariant components in the (d,q) frame. The resulting transformation is given by:

$$
\left\[\begin{array}{c}{s\_{d}} \ {s\_{q}} \ {s\_{o}}\end{array}\right]=\left\[\begin{array}{ccc}{\cos \theta} & {\sin \theta} & {0} \ {-\sin \theta} & {\cos \theta} & {0} \ {0} & {0} & {1}\end{array}\right]\left\[\begin{array}{c}{s\_{\alpha}} \ {s\_{\beta}} \ {s\_{o}}\end{array}\right]
$$

Obviously, this transformation corresponds to a rotation matrix Q with det = 1. The calculation of the speed matrix goes as follows:

$$
\Omega=\dot{\mathrm{Q}} \mathrm{Q}^{T}=\dot{\theta}\left\[\begin{array}{ccc}{0} & {1} & {0} \ {-1} & {0} & {0} \ {0} & {0} & {0}\end{array}\right]
$$

It should be noted that the speed matrix Ω is skew-symmetric, which is a necessary property of the speed term to preserve the rotational characteristics of the transformation.

## Transformations from (a,b,c) to (d,q) <a href="#transformations-from-a-b-c-to-d-q" id="transformations-from-a-b-c-to-d-q"></a>

Obviously there are four possible combinations to bring the three-phase system (*a, b, c*) to a (*d, q*) one, namely:

* Clarke followed by a rotation of -*θ*
* Concordia followed by a rotation of -*θ*
* Clarke followed by a rotation of -*θ* + *pi/*&#x32;
* Concordia followed by a rotation of -*θ* + *pi/*&#x32;

Notice that these transformations are known as **Park transformations** in the literature.

### Combination of Clarke and Rotation of -θ <a href="#combination-of-clarke-and-rotation-of-th" id="combination-of-clarke-and-rotation-of-th"></a>

$$
\left.\left\[\begin{array}{c}{s\_{d}} \ {s\_{q}} \ {s\_{o}}\end{array}\right]=\left\[\begin{array}{ccc}{\cos \theta} & {\sin \theta} & {0} \ {-\sin \theta} & {\cos \theta} & {0} \ {0} & {0} & {1}\end{array}\right] \begin{array}{c}{1 \quad-1 / 2} & {-1 / 2} \ {0} & {\sqrt{3} / 2} & {-\sqrt{3} / 2} \ {1 / 2} & {1 / 2} & {1 / 2}\end{array}\right]\left\[\begin{array}{c}{s\_{a}} \ {s\_{b}} \ {s\_{c}}\end{array}\right] \\\[8pt]
\=\frac{2}{3}\left\[\begin{array}{ccc}{\cos \theta} & {\cos (\theta-2 \pi / 3)} & {\cos (\theta+2 \pi / 3)} \ {-\sin \theta} & {-\sin (\theta-2 \pi / 3)} & {-\sin (\theta+2 \pi / 3)} \ {1 / 2} & {1 / 2} & {1 / 2}\end{array}\right]\left\[\begin{array}{c}{s\_{a}} \ {s\_{b}} \ {s\_{c}}\end{array}\right]
$$

For the three-phase system defined as in the equations at the top of this page, *s*<sub>*d*</sub> and *s*<sub>*q*</sub> become:

$$
s\_{d} =0 \\\[8pt] s\_{q} =-S \sqrt{2}
$$

#### Properties of the Transformation <a href="#properties-of-the-transformation" id="properties-of-the-transformation"></a>

As expected, *s*<sub>*d*</sub> and *s*<sub>*q*</sub> are time-invariant since they do not depend on *ωt.*

{% hint style="info" %}
HYPERSIM uses this transformation
{% endhint %}

Since *s*<sub>*d*</sub> vanishes, it is hard to check whether *s*<sub>*q*</sub> leads or lags *s*<sub>*d*</sub>. For that, consider a three-phase system with phase delay δ as follows:

$$
s\_{a}(t) =S \sqrt{2} \sin (\omega t-\delta) \\\[8pt]
s\_{b}(t) =S \sqrt{2} \sin (\omega t-\delta-2 \pi / 3) \\\[8pt]
s\_{c}(t) =S \sqrt{2} \sin (\omega t-\delta+2 \pi / 3)
$$

Applying Clarke transformation leads to:

$$
s\_{\alpha} =S \sqrt{2} \sin (\omega t-\delta) \\\[8pt]
s\_{\beta} =S \sqrt{2} \sin (\omega t-\delta-\pi / 2)
$$

Applying rotation of -θ leads to:

$$
{s\_{d}=-S \sqrt{2} \sin \delta=S \sqrt{2} \sin (-\delta)} \\\[8pt]
{s\_{q}=-S \sqrt{2} \cos \delta=S \sqrt{2} \sin (-\delta-\pi / 2)}
$$

Following figures show the spatial representation of this system for *δ = pi/6* and *ωt = 0*, then *ωt = pi/3*. It's worth noticing that *s*<sub>*q*</sub> lags *s*<sub>*d*</sub>.

{% columns %}
{% column %}

{% endcolumn %}

{% column %}

{% endcolumn %}
{% endcolumns %}

### Combination of Concordia and Rotation of -θ <a href="#combination-of-concordia-and-rotation-of-th" id="combination-of-concordia-and-rotation-of-th"></a>

$$
\left\[\begin{array}{c}{s\_{d}} \ {s\_{q}} \ {s\_{o}}\end{array}\right]=\left\[\begin{array}{ccc}{\cos \theta} & {\sin \theta} & {0} \ {-\sin \theta} & {\cos \theta} & {0} \ {0} & {0} & {1}\end{array}\right] \sqrt{\frac{2}{3}}\left\[\begin{array}{ccc}{1} & {-1 / 2} & {-1 / 2} \ {0} & {\sqrt{3} / 2} & {-\sqrt{3} / 2} \ {1 / \sqrt{2}} & {1 / \sqrt{2}} & {1 / \sqrt{2}}\end{array}\right]\left\[\begin{array}{c}{s\_{a}} \ {s\_{b}} \ {s\_{c}}\end{array}\right]\\\[8pt]
\=\sqrt{\frac{2}{3}}\left\[\begin{array}{ccc}{\cos \theta} & {\cos (\theta-2 \pi / 3)} & {\cos (\theta+2 \pi / 3)} \ {-\sin \theta} & {-\sin (\theta-2 \pi / 3)} & {-\sin (\theta+2 \pi / 3)} \ {1 / \sqrt{2}} & {1 / \sqrt{2}} & {1 / \sqrt{2}}\end{array}\right]\left\[\begin{array}{c}{s\_{a}} \ {s\_{b}} \ {s\_{c}}\end{array}\right]
$$

For the three-phase system defined as in the equations at the top of this page, *s*<sub>*d*</sub> and *s*<sub>*q*</sub> become:

$$
{s\_{d}=0} \\\[8pt]
{s\_{q}=-S \sqrt{3}}
$$


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/model-and-simulation/optimize-the-model/use-parameter-generators/clarke-concordia-and-park-transformations.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
