> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/model-and-simulation/phasor-domain-with-ephasorsim/integrate-a-power-system-model-to-ephasorsim/native-library-components.md).

# Native Library Components

## Positive-sequence and multiphase networks

ePHASORSIM supports two different network representations:

* **Positive-sequence networks**
* **Multiphase networks**

Some components are designed for **Positive-Sequence** networks, others for **Multiphase** networks, and some support both.

There is no parameter in ePHASORSIM to explicitly select the network type. Instead, the network type is determined by the components used to build the model: a model built with **positive-sequence components** is considered a positive-sequence network, while a model built with **multiphase components** is considered a multiphase network.

Consequently, positive-sequence and multiphase components should not be mixed within the same network model. Throughout the documentation, components, pin identifiers, workflows, and examples are clearly identified as **Positive-Sequence**, **Multiphase**, or applicable to both network types.

#### Positive-sequence networks

A positive-sequence network represents a balanced three-phase power system using a single equivalent phase.

Instead of modeling each phase individually, the solver assumes that:

* The three phases are balanced.
* Phase voltages have equal magnitudes.
* Phase angles are separated by 120°.

This representation significantly reduces the size of the network and is commonly used for:

* Transmission systems
* Transient stability studies
* Wide-area power-system analysis
* Large-scale networks containing thousands of buses

Because only one equivalent phase is modeled, positive-sequence simulations generally execute faster and require less memory.

#### Multiphase networks

A multiphase network models each phase explicitly. For example, a three-phase bus is represented by Bus\_A, Bus\_B, and Bus\_C, rather than a single positive-sequence equivalent.

This representation captures:

* Phase unbalance
* Single-phase loads
* Distribution feeders
* Phase-specific faults
* Detailed distribution system behavior

Multiphase models are therefore commonly used for:

* Distribution systems
* Microgrids
* Feeder studies
* Unbalanced network analysis

Because each phase is represented explicitly, multiphase models require more computation than positive-sequence models.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/model-and-simulation/phasor-domain-with-ephasorsim/integrate-a-power-system-model-to-ephasorsim/native-library-components.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
