> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/readme/release-notes-2019.md).

# Release Notes 2019

## Version: 2019.3

### New features

* Added support for MATLAB R2019a and R2019b
* Added a new PV component including a database from the California Energy Commission providing parameter values for 1000s of commercial cells
* Added 6-phase FD line component
* Added pin to access the auto-transformer tertiary for external impedance
* Added several VSC components
  * 2-level converter (switching function)
  * 2-level converter (switching devices)
  * 3-level NPC converter (switching function)
  * 3-level NPC converter (switching devices)
  * Full-bridge converter (switching function)
  * Full-bridge converter (switching devices)
  * Boost converter (switching function)
* Added "How to" example model for load flow
* Added cyber-physical example model
* Added Diagnostic panel in Target Manager to help fix target setup issues
* Added GUI to edit UCM files
* Added editable timeout in Simulation Settings/Advanced to manage simulation initialization and stopping sequences
* Added capability to export data to CSV format in ScopeView
* **TCP-UDP**: Added support for OPAL-RTLinux 64-bit
* **TCP-UDP**: Added support for configuration via GUI

### Improvements

* Improved workflow using snapshots
* **IEC 61850**: Improved ICD file parsing when element names are duplicated
* **Communication Network Simulation**: Improved installation workflow by automating the configuration of virtual interfaces upon installing HYPERSIM

### Bug fixes

* Fixed issue with Testview when saving snapshots to file
* Fixed need for administrative rights to launch the HYPERSIM installer
* Fixed issue when importing an EDD file twice in the same design
* Fixed issue with Squirrel Cage Induction Machine when connected directly to a converter
* Fixed displayed angle unit to degree in load flow input data report
* Fixed issue in ScopeView with Data Logger live acquisition where Play and Stop buttons were simultaneously enabled
* **IEC 61850**: Fixed validation of uniqueness of GOOSE messages done using the MAC address in combination with the AppID

### Known issues

N/A

***

## Version: 2019.2

### New features

* Added PSSE import capability
* Added new documentation server to replace PDF documentation
* Added protection relay function 67 to the Control Protection Relays library
* Added inverse time overcurrent functionality to protection relay 50/51
* Added DEGOV1 model in Control Governors library
* Added Preferences menu in the ribbon to set an extra timeout for simulation initialization
* Added validation to prevent assigning two different signals on the same output
* **Modbus Master**: Added support for OPAL-RTLinux 64-bit
* **Modbus Master**: Added support for configuration via GUI
* **Modbus Master**: Added support for floating 32-bit registers
* **Modbus Slave**: Added support for OPAL-RTLinux 64-bit
* **Modbus Slave**: Added support for configuration via GUI
* **Modbus Slave**: Added support for floating 32-bit registers
* **OPAL-RT Boards**: Added support for automatic FPGA bitstream validation and reprogramming upon starting the simulation
* **Communication Network Simulation**: OPAL-RT partnered with Scalable Network Technologies to provide HYPERSIM users with the capability for communication network modeling and cyber-physical simulation on the same hardware, offering a complete real-time cyber-physical solution for the development, testing, and assessment of electrical grids with communication networks. A detailed library of simulated cyber-attacks and corresponding cyber-defenses is also available.

### Improvements

* Improved licensing user experience by validating the end of support date instead of the version number
* Improved Locate selection quick link in the Netlist when working with large models to zoom in on the component
* Improved error message usability when starting the simulation and the CP 2-ph line has incorrect parameters
* Improved user experience when navigating through data recording files in ScopeView
* Improved license request workflow
* Improved data logger example model

### Bug fixes

* Fixed line impedance displayed unit that should have been pu/km for CP and PI lines
* Fixed filtering on Category in the Sensor form
* Fixed index display for large numbers in Sensor form

### Known issues

N/A

***

## Version: 2019.1

### New features

* Added new Renewable Energy example models for PVGS, FCGS, BESS and CHP
* Added support for MATLAB R2018a and R2018b
* Added data logger capability to start and stop recording while the simulation is running
* Added dynamic file management capability to the data logger
* Added load flow support to UCM
* Added autotransformer model
* Added transceiver models for voltage and current signals
* Added point of current measurement in thyristor model
* Added an option in the ribbon to export the design in EDD format
* Added support for I/O factor with new UI-based I/O system in the sensor view
* **UI**: Added capability to draw diagonal signal lines
* **UI**: Added capability to connect a bundle input to multiple outputs
* **C37.118 Master**: Added "Mismatch" connection point providing information whether the master has a different number of data configured than the slave
* **DNP3 Master**: Added option to execute the driver on a dedicated core
* **DNP3 Slave**: Added option to execute the driver on a dedicated core
* **Modbus Slave**: Added option to configure the initial values
* **OPAL-RT Boards**: Added support for Multi-System Expansion link (MuSE)
* **OPAL-RT Boards**: Added support for new Artix-7 FPGA board (OP5143)
* **OPC-UA**: Added support for OPAL-RTLinux 64-bit

### Improvements

* Improved default performance factor value to 20
* Improved workflow of the content editor with an expression analyzer
* Improved workflow with snapshot by providing it directly in the main HYPERSIM ribbon
* Improved workflow and fixed various issues with the Target Manager
* **DNP3 Master**: Improved data mapping using editable custom names instead of preconfigured order

### Bug fixes

* Fixed Advanced target settings that were not applied before simulation or saved with the model
* Fixed missing iteration parameter in "3-winding, w/ sat + tap + dec" transformer
* Fixed API function setSensorDataPoint()
* Fixed PT block error when using it as a network element mode
* Fixed transformers not displayed in Base Voltage view of the netlist if neutral pin is visible
* Fixed gcc compilation command not working
* Fixed issue with 1-phase wideband line model
* Fixed default value for the task mapping performance factor being too low
* Fixed issue with driver configuration update progress bar persisting after the update is completed
* Fixed various issues with non-persisting preferences
* Fixed issue with lost data when changing the number of points on a saturation curve
* Fixed wideband fitter failing to generate data
* Fixed issue with simulation preferences being saved on Apply instead of with the model
* Fixed R-L coupled wrong pin type that should be 3-phase only
* Fixed network issue that could cause a time out during code generation
* Fixed 1-phase to 3-phase connection type change not taken into account at the next Analyze
* Fixed issue with .pun file not loading in the DC line model
* **UI**: Fixed various bundle and breakout connection issues
* **UI**: Fixed Advanced Find window not hiding and re-showing correctly
* **UI**: Fixed various issues in Edit Symbol mode
* **UI**: Fixed various issues in Library Maintenance
* **UI**: Fixed rename issue after copy/paste action
* **UI**: Fixed issues with Observables on subcircuits
* **UI**: Fixed Parts Library disappearing when floated
* **IEC 61850**: Fixed GOOSE messages corruption when daName refers directly to a basic data attribute
* **IEC 61850**: Fixed cVal.mag.f data attribute parsing

### Breaking changes

### Known issues

N/A


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/readme/release-notes-2019.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
