> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/hypersim/simulation-control-monitoring-and-logging/introduction-to-simulation-control-and-monitoring.md).

# Introduction to Simulation Control & Monitoring

HYPERSIM provides several tools for monitoring, visualizing, and recording simulation data. Depending on your needs, you can interact with signals during a simulation, create custom visualization interfaces, record data for later analysis, or use specialized monitoring and analysis tools.

**ScopeView is the primary tool for monitoring and analyzing simulation signals in HYPERSIM**. Other tools provide complementary capabilities for specific workflows.

## Choose a tool

Use the following table to identify the tool that best fits your needs and refer to its documentation page for more information.

| Use                         | If you want to...                                                                                                                   |
| --------------------------- | ----------------------------------------------------------------------------------------------------------------------------------- |
| **ScopeView**               | Monitor, visualize, and analyze simulation signals.                                                                                 |
| **Dashboards**              | Create an interactive interface for visualizing and interacting with simulation data.                                               |
| **DataLogger**              | Record simulation data for later analysis.                                                                                          |
| **Snapshots**               | Save and restore the state of a simulation.                                                                                         |
| **FPGA Scope**              | Monitor signals associated with FPGA applications.                                                                                  |
| **HYPERSIM built-in tools** | Monitor signals directly in the schematic, analyze real-time simulation performance post-simulation, or run impedance measurements. |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/hypersim/simulation-control-monitoring-and-logging/introduction-to-simulation-control-and-monitoring.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
