> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/ni-slsc-modules/analog-bidirectional-modules/op8930-description/installation.md).

# Installation

When you buy a system from OPAL-RT, the module(s) come already installed with the OP8G1 or OP8G3 I/O modules and the FIU relays according to the [configuration selected](https://www.opal-rt.com/docs/ni-slsc-modules/analog-bidirectional-modules/op8930-description.md#op8910-configurations). If the board did not come already installed in the [NI SLSC-12001 chassis](https://www.opal-rt.com/docs/ni-slsc-modules/op8900-slsc-modules-overview/modules-and-platform-presentation.md) follow these instructions.

## Install an SLSC module <a href="#installation" id="installation"></a>

{% hint style="danger" %}
SLSC modules **do not support hot plug-in**.\
Make sure the **SLSC system** is **powered down before removing the SLSC module**.
{% endhint %}

1. Inspect the slot pins on the chassis backplane for any bending or damage before installing a module.
2. Install a module into a chassis slot by first placing the module PCB into the front of the PCB guides at the top and bottom.
3. Slide the module into the chassis until you begin to feel resistance then push up the injector/ejector handle to fully seat the module into the chassis frame.
4. Secure the module front panel to the chassis using the module front-panel mounting screws.

<figure><img src="broken://spaces/7LhLoEldIvunS3fxYxrx/files/qQxY7pSl6eYa9MWEZKXa" alt=""><figcaption></figcaption></figure>

## Remove an SLSC module

1. Unsecure the module front panel from the chassis by loosening the module front-panel mounting screws.
2. Push down on the injector/ejector handle to pull the module away from the backplane connector(s).
3. Slide the module to the front of the chassis, making sure the module remains in the guide rails as you slide it out of the chassis.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/ni-slsc-modules/analog-bidirectional-modules/op8930-description/installation.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
