> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/ni-slsc-modules/digital-bidirectional-modules/op8926-description/specifications.md).

# Specifications

<table data-search="false"><thead><tr><th width="344.66668701171875">Category</th><th>Specification</th></tr></thead><tbody><tr><td>Product name</td><td><strong>OP8926</strong></td></tr><tr><td>Part numbers</td><td>See <a href="https://www.opal-rt.com/docs/ni-slsc-modules/digital-bidirectional-modules/op8926-description.md#op8910-configurations">Available configurations</a></td></tr><tr><td>Module type</td><td>Digital input/output conditioning</td></tr><tr><td>Form factor</td><td>NI <a href="https://www.ni.com/en/shop/hardware-portfolio/instruments/switch-load-signal-conditioning?srsltid=AfmBOoptaBDAejiY8QMG2uTaFbhBD00lWeYMbOf2IS_ZOUqDfbYNXw98">SLSC</a> (Switch Load and Signal Conditioning)</td></tr><tr><td>SLSC module design specifications</td><td>Version 1.2.1</td></tr><tr><td>SLSC compliance level</td><td>1</td></tr><tr><td>Rear I/O compatibility</td><td>[01] (Digital Input/Output up to 32 channels)</td></tr><tr><td>Hot-plug support</td><td>No</td></tr><tr><td>Channels</td><td>32 IO in 4 banks configurable as inputs or outputs | Bank 1 : D0-7 | Bank 2 : D8-15 | Bank 3 D16-23 | Bank 4 D24-31</td></tr><tr><td>Input voltage range</td><td>0 to 30 VDC</td></tr><tr><td>Input impedance</td><td>>  100 kOhms</td></tr><tr><td>Maximum input protection</td><td>±50 V</td></tr><tr><td>Input reverse voltage protection</td><td>Signal diode</td></tr><tr><td>Input detection threshold</td><td>4 programmable Schmitt Trigger Level step.1176 V rom .470v to 29.4 Threshold high and Threshold Low for each bank</td></tr><tr><td>Input recommended levels threshold</td><td><p>The default thresholds are:   </p><ul><li>LOW level = 1.5V</li><li>HIGH Level = 3.5V </li></ul><p>To improve noise immunity, a LOW-level threshold of 1/3 Vuser, and a HIGH-level threshold of 2/3 Vuser, are recommended.<br>For more information about the use of <strong>Vuser</strong> and <strong>Vrtn</strong> please refer to this article in the OPAL-RT knowledge base: <a href="https://portal.opal-rt.com/Knowledge-Base/Article/?id=3bb5144d-9356-ef11-bfe3-002248b1d264">Powering DB37 Boards for Digital Output Modules</a>.</p></td></tr><tr><td>Input delay Low-to-High</td><td>10 ns (implementation-dependent)                                                              </td></tr><tr><td>Input delay High-to-Low</td><td>15 ns (implementation-dependent)                                                         </td></tr><tr><td>Output Voltage Range</td><td>4.5 to 24V Max (default internal 4.5 V)</td></tr><tr><td>Output impedance</td><td>2 to 15 ohm</td></tr><tr><td>Output protection</td><td>50 mA resettable fuse</td></tr><tr><td>Output protection thresholds</td><td><p>Maximum Vuser + 0.5V</p><p>Minimum  -0.5V</p></td></tr><tr><td>Output logic high levels (typical)</td><td><ul><li>Vuser &#x3C;= 25 V, noload: Vuser -0.2 V, 50 mA: Vuser -0.8 V</li><li>Vuser > 25 V, no load: Vuser -3.5 V, 50 mA: Vuser -4.7 V</li></ul></td></tr><tr><td>Output logic low levels (typical)</td><td>Vuser 5 V to 30 V, Vlow=0.1 V</td></tr><tr><td>Output delay Low-to-high<br>(hardware typical<sup>*</sup>)</td><td><p>&#x3C; 100 ns @ 25 °C for 25 V</p><p>&#x3C; 90 ns @ 25 °C for 5 V</p></td></tr><tr><td>Output delay High-to-Low<br>(hardware typical<sup>*</sup>)</td><td><p>&#x3C; 100 @ 25 °C for 25 V</p><p>&#x3C; 90 ns @ 5 °C for 5 V</p></td></tr><tr><td>Output rise/fall time (x to y)</td><td><p>&#x3C; 20 ns @ 5 V </p><p>&#x3C; ns @ 30 V</p></td></tr><tr><td>Output minimum pulse detection (resolution)</td><td><p>90 ns @ 5 V</p><p>130 ns 30 V</p></td></tr><tr><td>Output maximum frequency</td><td>DC to 8 Mbit</td></tr><tr><td>Storage temperature</td><td>-40 °C to 85 °C</td></tr><tr><td>Operating humidity</td><td>10% to 90% non-condensing</td></tr><tr><td>Storage humidity</td><td>5% to 95% non-condensing</td></tr><tr><td>Pollution degree</td><td>2</td></tr><tr><td>Maximum altitude</td><td>2,000 m</td></tr><tr><td>Intended use</td><td>Indoor use only</td></tr><tr><td>Power requirement</td><td>21 W</td></tr></tbody></table>

<sup>\*</sup> The actual delay depends on the implementation

## Number of clock outputs simulated (power limitation)

| **< 500 Kb** | 32 | 32 | 32 | 32 | 32 |
| ------------ | -- | -- | -- | -- | -- |
| **1 Mb**     | 32 | 32 | 32 | 24 | 18 |
| **2 Mb**     | 32 | 32 | 24 | 14 | 12 |
| **4 Mb**     | 32 | 24 | 16 | 8  | 5  |
| **8 Mb**     | 24 | 16 | 12 | 5  | 4  |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/ni-slsc-modules/digital-bidirectional-modules/op8926-description/specifications.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
