> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/op1400pr/get-started/assemble-the-test-bench.md).

# Assemble the Test Bench

Before proceeding, please **read these instructions thoroughly**. If any part is unclear or confusing, please contact [**OPAL-RT TECHNOLOGIES**](https://www.opal-rt.com/contact-technical-support/) for clarification.

{% hint style="danger" %}
Always **install the modules one at a time**, with **no more than one unit hanging from its slides**.

**Failure to do so may cause the cabinet to tilt, resulting in serious injury.**
{% endhint %}

### Mount the DC power supplies <a href="#physical-assembly-mounting-the-dc-power-supplies" id="physical-assembly-mounting-the-dc-power-supplies"></a>

Please follow these steps:

1. Determine the **mounting height** for each DC power supply by **referring to the illustrations below**, specific to your OP1400PR bench model. The **red rectangles indicate the correct locations for the units**, where the mounting screws are located on the chassis side rails.
2. **Remove the screws** from the chassis side rails, **reserve them for step 4**.
3. Insert the power supplies in their appropriate locations, **stacking the bottommost one on the pre-installed support brackets** inside the chassis and stacking the **remaining supplies (if any) on top of one another**.
4. Install the previously removed screws on the side rails to fasten the power supply unit(s) in place.

{% tabs %}
{% tab title="OP1400PR-10" %}

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FNAFzvzGiTvKKqJHevihp%2Fimage.png?alt=media&amp;token=db864b88-2439-4d8d-bda6-7f89fa5f9810" alt=""><figcaption></figcaption></figure>
{% endtab %}

{% tab title="OP1400PR-20" %}

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2F8fhEOLLpgLCT0z29YfZE%2Fimage.png?alt=media&amp;token=85014506-6649-4cdd-84e3-788d10091e82" alt=""><figcaption></figcaption></figure>
{% endtab %}

{% tab title="OP1400PR-30" %}

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FLOg84VC79xsqi85yocOz%2Fimage.png?alt=media&amp;token=18493c75-8cbd-458e-8d04-9277c8ffb262" alt=""><figcaption></figcaption></figure>
{% endtab %}

{% tab title="OP1400PR-60" %}

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2Fwq9CPGGcQEx7m9X3UH0a%2Fimage.png?alt=media&amp;token=f6492172-fbfd-4fd4-b09a-96dd1dfe5a2b" alt=""><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}

### Mounting OP8110 amplifiers <a href="#physical-assembly-mounting-the-op8110-amplifiers" id="physical-assembly-mounting-the-op8110-amplifiers"></a>

The cabinet is configured with **removable slides** (as displayed below) to allow easy manipulation of the amplifiers. The following steps must be executed to install these slides on **each OP8110 unit**:

1. **Locate** the **installation height of the amplifier units** using the illustrations below.
   * OP8110-6 amplifiers must be placed on top of OP8110-3 amplifiers if both models are present.
   * The slides are pre-installed on the chassis.
2. **Disassemble** the inner portion of the slides by sliding them out and by pushing the release latches.
3. **Detach the mounting screws** from both sides of the amplifier, reserve them for step 4.
4. **Fasten the inner rail** of the slides onto the amplifiers using the mounting screws.
5. One amplifier at a time, carefully **align the amplifier with the mating slides** on the chassis. Once the slides are properly aligned, **slide the amplifier into the chassis**, pushing on the lock buttons if necessary.
6. **Mount the amplifiers to the chassis side rails** using the screws that are already present on the side rails.

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2F3riJJ77spNM4ZwiC50KK%2Fimage.png?alt=media&amp;token=790dbb3b-0d1c-4454-b6fd-1f1d55d37e8d" alt="" width="375"><figcaption></figcaption></figure>

{% hint style="danger" %}
If an OP8110 unit needs to be removed from the rack for RMA or maintenance, turn off the PDU before opening the cabinet and disconnectingthe cables.

The detailed procedure is outlined in the [**Safety & Servicing Guidelines**](https://www.opal-rt.com/docs/op1400pr/op1400pr-overview/safety-and-servicing-guidelines.md#deballage-et-assemblage).
{% endhint %}

{% tabs %}
{% tab title="OP1400PR-10" %}

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2Fquue8KrWIUuI3WVSbRDY%2Fimage.png?alt=media&amp;token=c51703dd-5039-43b0-a046-5f5a249298d9" alt=""><figcaption></figcaption></figure>
{% endtab %}

{% tab title="OP1400PR-20" %}

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FqzETVq1OjXpO7243Gkp6%2Fimage.png?alt=media&amp;token=ffae76f4-c08a-488b-8c24-88f6cc65d291" alt=""><figcaption></figcaption></figure>
{% endtab %}

{% tab title="OP1400PR-30" %}

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FntbtSuSc5oRzrk2L8jJP%2Fimage.png?alt=media&amp;token=dedf47a5-1b23-4c8a-92cb-5e8b786e02da" alt=""><figcaption></figcaption></figure>
{% endtab %}

{% tab title="OP1400PR-60" %}

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FqCwYe3B2X2EdNfBFcwLs%2Fimage.png?alt=media&amp;token=7f8a32dc-d321-46db-9259-997ea8b8b2f9" alt=""><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/op1400pr/get-started/assemble-the-test-bench.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
