> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/op1400pr/op1400pr-overview/description-and-components/op8110-4q-power-amplifier/hardware-interface.md).

# Hardware Interface

## Front panel <a href="#front-panel" id="front-panel"></a>

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FIrolkKoTiijhkdJmjLC3%2Fimage.png?alt=media&amp;token=8c90249f-a658-4e40-b6a7-9b4aef02e2f0" alt=""><figcaption></figcaption></figure>

### Power-on/off button

{% columns %}
{% column %}

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2Ff3arwGGISKgWfDhb2GJI%2Fimage.png?alt=media&amp;token=8badfd9e-d7c9-481d-8624-eef7090da55b" alt=""><figcaption></figcaption></figure>
{% endcolumn %}

{% column %}
**Power on the amplifier:** Press the button. The power status LED lights green when OP8110 is powered on.

**Power off the amplifier**: Press and hold the power button until the “C” LED turns off (approx. 2.5 seconds) and then release it.
{% endcolumn %}
{% endcolumns %}

{% hint style="info" %}
In the unlikely event that this shutdown method is unsuccessful, a **hard reset** can be achieved in two ways:

1. Shut down the amplifier auxiliary power (13.5 VDC) by shutting down the 120V/220 V inlet power (unplug the power cords or switch off client circuit breaker/switch).
2. Press and hold the power button until power down is achieved (approx. 6 sec) - **Not recommended! - only if requested by OPAL-RT support.**
   {% endhint %}

### Ethernet port

{% columns %}
{% column %}

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FntCEAyzxw5pac3e8q077%2Fimage.png?alt=media&amp;token=b43f604a-5af6-4d89-811c-fabf66f588d8" alt=""><figcaption></figcaption></figure>
{% endcolumn %}

{% column %}
The Ethernet port is used to interface directly with the OP8110 from a PC through TCP/IP. It must be used to **update the bitstream of the amplifier**.
{% endcolumn %}
{% endcolumns %}

### Mini USB port

{% columns %}
{% column %}

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FEQnqHM05O3F3U2GTBvEF%2Fimage.png?alt=media&amp;token=ae180d7c-4ee4-4266-b74f-79c60e3fbb53" alt=""><figcaption></figcaption></figure>
{% endcolumn %}

{% column %}
The serial communication port is used for **troubleshooting** by **OPAL-RT personnel**.
{% endcolumn %}
{% endcolumns %}

### Run/Prog switch

{% columns %}
{% column %}

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2F2UcuzBj1bOxriyCL0A7C%2Fimage.png?alt=media&amp;token=bc0fe580-8ff3-455f-814d-ae3d4c393ea4" alt=""><figcaption></figcaption></figure>
{% endcolumn %}

{% column %}
Used for **troubleshooting** by **OPAL-RT** personnel.

In **normal operation** the switch should be in the **RUN** position.
{% endcolumn %}
{% endcolumns %}

### SFP ports

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FfchZNNaLkiH3qCfuztcs%2Fimage.png?alt=media&amp;token=433265d5-8f94-49e1-b210-471da0f55b92" alt=""><figcaption></figcaption></figure>

Two optical-fiber 2 Gbps SFP[^1] ports identified as **GTP** (Gigabit Transceiver Port) for real-time control of the OP8110 are available from the front interface:

* **Port B** (leftmost port): used for **debug** purposes.
* **Port A** (rightmost port): used as the **primary real-time control interface**.

## SFP communication protocol <a href="#sfp-communication-protocol" id="sfp-communication-protocol"></a>

The implemented SFP communication protocol allows an external unit (such as an OPAL-RT simulator) to send **voltage or current reference setpoints to the OP8110's embedded controller**, while also allowing **measurements to be fed back from the OP8110** to the external unit.

This protocol is summarized below. Please contact [OPAL-RT's Technical Support](https://www.opal-rt.com/contact-technical-support/) for detailed specifications of the protocol if required.

#### Data transmitted by the OP8110 <a href="#data-transmitted-by-the-op8110" id="data-transmitted-by-the-op8110"></a>

The following data is transmitted in real-time by the OP8110 on the SFP link:

* Amplifier statuses (bit flags)
* Measured real-time output voltage for every output (16 bit)
* Measured real-time output current for every output (16 bit)

#### Data received by the OP8110 <a href="#data-received-by-the-op8110" id="data-received-by-the-op8110"></a>

The OP8110 expects the following data in real-time on the SFP link:

* Amplifier control bits (bit flags)
* Real-time voltage reference (when regulating the output voltage) for every output (16 bit)
* Real-time current reference (when regulating the output current) for every output (16 bit)

### LEDs

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FR1qm31B4EmxZy224k25L%2Fimage.png?alt=media&amp;token=8b8504e2-db13-4bf2-ae3e-a478d025bebe" alt=""><figcaption></figcaption></figure>

<table data-search="false"><thead><tr><th width="123.3333740234375">LED Label</th><th width="173.66668701171875">LED name</th><th width="422.00006103515625">Description</th></tr></thead><tbody><tr><td><strong>ST</strong></td><td><strong>Unit status</strong></td><td><mark style="color:$success;"><strong>Green</strong></mark>: The unit is powered up and functioning properly.<br><mark style="color:$danger;"><strong>Red</strong></mark>: There is a system error.</td></tr><tr><td><strong>C</strong></td><td><strong>FPGA configuration</strong></td><td><mark style="color:$success;"><strong>Green</strong></mark>: The FPGA programming is complete.</td></tr><tr><td><strong>U</strong></td><td><strong>User defined LED</strong></td><td><mark style="color:$success;"><strong>Green</strong></mark>/<mark style="color:$warning;"><strong>Orange</strong></mark> : User configurable to display a condition specified by the user. If undefined, it displays no status (unlit).</td></tr><tr><td><strong>SYNC T</strong></td><td><strong>Synchronization transmitting (TX)</strong></td><td><mark style="color:$success;"><strong>Green</strong></mark>: <em>Reserved for future implementation</em></td></tr><tr><td><strong>SYNC R</strong></td><td><strong>Synchronization receiving (RX)</strong></td><td><mark style="color:$success;"><strong>Green</strong></mark>: <em>Reserved for future implementation</em></td></tr><tr><td><strong>SYNC M/S</strong></td><td><strong>Synchronization master-slave</strong></td><td><p><mark style="color:$success;"><strong>Green</strong>:</mark> If <strong>using</strong> an external simulator to control the OP8110</p><p><mark style="color:$warning;"><strong>Orange</strong></mark>: If <strong>not using</strong> an external simulator to control the OP8110</p></td></tr><tr><td><strong>A</strong></td><td><strong>SFP_A Tx/Rx</strong></td><td><mark style="color:$success;"><strong>Green</strong></mark>: The SFP channel is <strong>correctly configured</strong>.<br><mark style="color:$warning;"><strong>Orange</strong></mark>: The SFP channel is <strong>not correctly configured</strong>.</td></tr><tr><td><strong>B</strong></td><td><strong>SFP_B Tx/Rx</strong></td><td><mark style="color:$success;"><strong>Green</strong></mark>: The SFP channel is <strong>correctly configured</strong>.<br><mark style="color:$warning;"><strong>Orange</strong></mark>: The SFP channel is <strong>not correctly configured</strong>.</td></tr></tbody></table>

## Rear panel <a href="#rear-panel" id="rear-panel"></a>

### Optical synchronization connectors

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FyERcs056O0rOE7l4M6N5%2Fimage.png?alt=media&amp;token=79e219da-5009-4acd-8b63-152058b93817" alt=""><figcaption><p><strong>OP8110-3</strong> optical synchronization connectors</p></figcaption></figure>

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FH0OAnD7Af55V1n46sMlu%2Fimage.png?alt=media&amp;token=65be09b9-06bf-439c-b7c9-3b79162f3c13" alt=""><figcaption><p><strong>OP8110-6</strong> optical synchronization connectors</p></figcaption></figure>

Optical links (Rx and Tx) to **synchronize switching between OP8110 units** to get **better performance**. There is one set of Rx/Tx optical links per OP8110 amplifier.

OP8110 amplifiers can be **daisy-chained** (Rx of a unit connected to Tx of another unit) in any order as long as one unit in the chain has its Rx unconnected. The OP8110 amplifiers will automatically configure their synchronization interfaces (master/slave) to match with the connected cables, no user configuration is required.

{% hint style="danger" %}
The OP8110 synchronization cables **should neither be connected nor removed** during amplifier operation. Doing so **may** **result in both damage to the amplifier and voiding of the warranty.**
{% endhint %}

### GND screw

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FtlGyyQRRS26k7VFszmQE%2Fimage.png?alt=media&amp;token=4c2c770b-b7d8-4d26-8102-413e1ec32a22" alt=""><figcaption><p><strong>OP8110-3</strong> ground screw</p></figcaption></figure>

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2F0ybO1XYFAH7fYhvlrEjo%2Fimage.png?alt=media&amp;token=dd7b3479-53c4-4830-ac78-cc6b0269a49f" alt=""><figcaption><p><strong>OP8110-6</strong> ground screw</p></figcaption></figure>

The ground screw must be connected to **electrical ground** for safety purposes. There is one ground screw per OP8110 amplifier.

### Auxiliary supply connector

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FFropJUut8BQ4zpajYS6T%2Fimage.png?alt=media&amp;token=513529cc-47cb-4016-ab10-713633aa6480" alt=""><figcaption><p><strong>OP8110-3</strong> auxiliary supply connector</p></figcaption></figure>

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2Fo23swXhyfzsCT5Ii08wV%2Fimage.png?alt=media&amp;token=5e992a15-386f-42f7-bc07-df77e8aa9505" alt=""><figcaption><p><strong>OP8110-6</strong> auxiliary supply connector</p></figcaption></figure>

Supply input for the control circuitry of the OP8110. There is one auxiliary supply connector per group, i.e.:

* **OP8110-3**: One (1) auxiliary supply connector (**AUX1** for group 1)
* **OP8110-6**: Two (2) auxiliary supply connectors (**AUX1** for group 1 and **AUX2** for group 2)

### DC inputs

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FLvQlBVyRUNvf0nUQ4LOr%2Fimage.png?alt=media&amp;token=482dabf1-8ab1-4570-b39c-d507efc8af3d" alt=""><figcaption><p><strong>OP8110-3</strong> DC inputs</p></figcaption></figure>

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2Fyw1uSxuTk7Dbnst6ugxx%2Fimage.png?alt=media&amp;token=4093a662-b316-4775-a3bd-1eb0ee1d2c07" alt=""><figcaption><p><strong>OP8110-6</strong> DC inputs</p></figcaption></figure>

500 V<sub>DC</sub> inputs for the OP8110 power stages. Each OP8110 group has its isolated DC input. Refer to [OP8110 power stage](https://www.opal-rt.com/docs/op1400pr/op1400pr-overview/description-and-components/op8110-4q-power-amplifier.md#particularities) for more details.

* **OP8110-3**: **DC1** (red and black connectors)
* **OP8110-6**: **DC1** (red and black connectors) and **DC2** (red and black connectors)

### Outputs

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FzRSQkvfzUb5VBEcFiWLk%2Fimage.png?alt=media&amp;token=1c076587-9e16-4b7b-9ed3-30fbd54b4528" alt=""><figcaption><p><strong>OP8110-3</strong> outputs</p></figcaption></figure>

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FzoXMLhRlklnkRMWlHx7y%2Fimage.png?alt=media&amp;token=5ff20c9f-aab6-4cd3-a4d1-2145016e923a" alt=""><figcaption><p><strong>OP8110-6</strong> outputs</p></figcaption></figure>

**High-voltage outputs** of the amplifier. Each OP8110 group has 3 outputs, each of which has its dedicated neutral point. Refer to [OP8110 power stage](https://www.opal-rt.com/docs/op1400pr/op1400pr-overview/description-and-components/op8110-4q-power-amplifier.md#particularities) for more details.

* **OP8110-3**
  * **L1** connector (<mark style="color:$danger;">**red**</mark>) + Neutral connector (white)
  * **L2** connector (**black**) + Neutral connector (white)
  * **L3** connector (<mark style="color:blue;">**blue**</mark>) + Neutral connector (white)
* **OP8110-6**
  * Group 1
    * **L1** connector (<mark style="color:$danger;">**red**</mark>) + Neutral connector (white)
    * **L2** connector (**black**) + Neutral connector (white)
    * **L3** connector (<mark style="color:blue;">**blue**</mark>) + Neutral connector (white)
  * Group 2
    * **L4** connector (<mark style="color:$danger;">**red**</mark>) + Neutral connector (white)
    * **L5** connector (**black**) + Neutral connector (white)
    * **L6** connector (<mark style="color:blue;">**blue**</mark>) + Neutral connector (white)

### **Remote sense connectors**

Remote voltage sensing inputs can be used to **measure amplifier terminal voltages**, **DUT terminal voltages**, or **other remote voltage terminals**.

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2F4q1O5cxXMtPZW7XEYPz2%2Fimage.png?alt=media&amp;token=d1739478-962c-4e84-bf9c-cb51acc8f548" alt=""><figcaption><p><strong>OP8110-3</strong> remote sense connectors</p></figcaption></figure>

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FifCoeT08S764gRbku8nR%2Fimage.png?alt=media&amp;token=3e41bae6-fa37-4fec-9706-d5dbd9fb7f3c" alt=""><figcaption><p><strong>OP8110-6</strong> remote sense connectors</p></figcaption></figure>

[^1]: Small Form-Factor Pluggable


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/op1400pr/op1400pr-overview/description-and-components/op8110-4q-power-amplifier/hardware-interface.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
