> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/op1400pr/op1400pr-overview/description-and-components/op8110-4q-power-amplifier/specifications.md).

# Specifications

<table data-header-hidden data-search="false"><thead><tr><th></th><th></th></tr></thead><tbody><tr><td><strong>Form factor</strong></td><td>2U rackmount</td></tr><tr><td><strong>Dimensions (W × D × H)</strong></td><td>51.4 × 48.3 × 8.9 cm (20.3" × 19" × 3.5”)</td></tr><tr><td><strong>Weight</strong></td><td>OP8110-3: approx. 11 kg (24.3 lbs)<br>OP8110-6: approx. 17 kg (37.5 lbs)</td></tr><tr><td><strong>Power supply</strong></td><td>500 V<sub>DC,</sub> 14 A<sub>DC</sub> max.</td></tr><tr><td><strong>Number of independent outputs</strong></td><td>For OP8110-3: 3 (one 3-output group)<br>For OP8110-6: 6 (two 3-output groups)</td></tr><tr><td><strong>Output voltage - Line to neutral</strong></td><td>0 to 150 V<sub>RMS</sub>. Per output:  120 V<sub>RMS</sub> nominal</td></tr><tr><td><strong>Output Voltage - Line to line</strong></td><td>0 to 300 V<sub>RMS</sub>. Between two outputs: 240 V<sub>RMS</sub> nominal<br>0 to 420 V<sub>DC</sub>. Between two outputs, 400 V<sub>DC</sub> nominal</td></tr><tr><td><strong>Maximum output current</strong></td><td>±14 A<sub>RMS</sub>/A<sub>DC</sub>, per output. Neutral current is limited at low frequency, see the section below on <a href="#neutral-current-limitation">Neutral current limitation</a>.</td></tr><tr><td><strong>Rated output power</strong></td><td>5 kVA per group</td></tr><tr><td><strong>Bandwidth</strong></td><td>10 kHz</td></tr><tr><td><strong>Maximum output voltage slew rate</strong></td><td>5 V/μs</td></tr><tr><td><strong>Maximum total harmonic distortion</strong></td><td>0.5% measured at 50/60 Hz at nominal voltage/current</td></tr><tr><td><strong>Output ripple voltage</strong></td><td>3.3 V<sub>p-p</sub>. Typical 300 kHz switching frequency ripple.</td></tr><tr><td><strong>VFEM measurement range</strong></td><td>±600 V</td></tr><tr><td><strong>Output inductance</strong></td><td>0 or 75 μH. Each output of the OP8110 incorporates a bypassable output inductor.</td></tr><tr><td><strong>Maximum rated isolation voltage</strong></td><td>353 V<sub>RMS</sub>. Between any input/output terminal and amplifier chassis, as well as between any input/output terminal combinations of a 3-output group.</td></tr><tr><td><strong>Auxiliary DC input voltage</strong></td><td>13.5 V<sub>DC</sub> for each output group</td></tr><tr><td><strong>Overvoltage category</strong></td><td>CAT I. The OP8110 is connected downstream from a well-protected isolated DC power supply.</td></tr><tr><td><strong>Operating temperatures</strong></td><td>10 to 40 °C (50 to 104 °F)</td></tr><tr><td><strong>Maximum relative humidity @ 31 °C</strong><br><strong>Maximum relative humidity @ 40 °C</strong></td><td>80% non-condensing<br>50% non-condensing</td></tr><tr><td><strong>Maximum altitude</strong></td><td>2000 m (6,562 ft.)</td></tr><tr><td><strong>Pollution</strong></td><td>Degree 2</td></tr><tr><td><strong>Operating conditions</strong></td><td>Continuous</td></tr><tr><td><strong>Equipment mobility</strong></td><td>Fixed</td></tr><tr><td><strong>Intended Use</strong></td><td>Indoor use only</td></tr></tbody></table>

## Neutral current limitation <a href="#neutral-current-limitation" id="neutral-current-limitation"></a>

As the OP8110 neutral point for each group is formed by the midpoint of two capacitors across the DC input rails, there are frequency-dependent limits on the maximum current that can flow through the neutral point terminals. This current limitation applies primarily to low frequencies; above 25 Hz the maximum output current of the amplifier (14A<sub>RMS</sub>) can flow through the neutral point, while for lower frequencies the maximum neutral current is reduced.

Please note, this low-frequency neutral current limitation is primarily applicable to amplifier configurations that induce large neutral currents, such as a single phase and unbalanced three-phase operation.

The following figure outlines the maximum neutral current (total current of all three neutral terminals within an OP8110 group) vs. AC frequency for the OP8110<sup>**\***</sup>.

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FnF760L5JUXKmkPwoMV1L%2Fimage.png?alt=media&amp;token=377b64de-a84a-40e7-95a8-3fd2133d9327" alt="" width="563"><figcaption></figcaption></figure>

<sup>**\***</sup> *To attain the maximum neutral current specified in the above graph, the 3 neutral terminals of the respective OP8110 group (located at the rear of the OP8110 unit) should be connected*.

## Timing specifications <a href="#timing-specifications" id="timing-specifications"></a>

The following timing parameters must be considered for the system functionality/stability.

<figure><img src="https://3155739458-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FzVJdfp93TWLISP6nkqTs%2Fuploads%2FrRUw1SyFXNkyyDak7OW1%2Fimage.png?alt=media&amp;token=d3dd4caf-4352-43ba-9e34-493036048212" alt=""><figcaption></figcaption></figure>

* **t**<sub>**COM\_SET**</sub> = Propagation Delay of the set point: V or I, typically around 10 ns (negligible)
* **t**<sub>**OP8110**</sub> = Intrinsic Delay of the OP8110
* **t**<sub>**COM\_MES**</sub> = Propagation delay of the measurements: V or I, typically around 10 ns (negligible)
* **t**<sub>**RTS**</sub> = Time required by the real-time simulator to compute and output a set point
  * ≈ 10 to 50 µs on CPU
  * ≤1 µs on FPGA (eFPGASim)
* **t**<sub>**d**</sub> = t<sub>RTS</sub> + t<sub>COM\_SET</sub> + t<sub>OP8110</sub> + t<sub>COM\_MES</sub>

Where **t**<sub>**d**</sub> is the total time delay of the closed loop, introduced by the power amplifier, measurement, and discrete-time nature of the real-time simulator.

The OP8110 provides the following timing characteristics:

* **t**<sub>**OP8110**</sub>: 8.3 µs typical


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/op1400pr/op1400pr-overview/description-and-components/op8110-4q-power-amplifier/specifications.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
