> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/op4300/operate-the-unit/connect-analog-and-digital-i-os/i-os-specifications.md).

# I/Os Specifications

## Analog Input

A single bank of **16 Analog Input channels** is provided. Each channel uses a 16-bit resolution analog-to-digital (ADC) converter. Each ADC can sample up to 2 MSPS, giving a total throughput of 16 MSPS, all channels being simultaneously sampled.

<figure><img src="https://2927401004-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRx4mGAP0TDheRyJ3CrkF%2Fuploads%2FpUVnvUCxyKSw8JM08S68%2FOP4300_AI_schem.png?alt=media&amp;token=f181f3b2-f3a7-409a-80c8-a20d3b7ebb0f" alt=""><figcaption><p><em>High-Level Circuit Diagram per Analog Input channel</em></p></figcaption></figure>

<table data-header-hidden data-search="false"><thead><tr><th></th><th></th></tr></thead><tbody><tr><td><strong>Number of Channels</strong></td><td>16</td></tr><tr><td><strong>Connector</strong></td><td>P1 channels 00 to 15</td></tr><tr><td><strong>Resolution</strong></td><td>16 bits</td></tr><tr><td><strong>Input Impedance to GND</strong></td><td>500 kΩ</td></tr><tr><td><strong>Differential Input Impedance</strong></td><td>1 MΩ</td></tr><tr><td><strong>Input Impedance Accuracy</strong></td><td>1%</td></tr><tr><td><strong>Maximum Sampling Frequency</strong></td><td>2 MSPS</td></tr><tr><td><strong>Input Voltage Range</strong></td><td>±10 V differential and single-ended<br>(accuracy 1% on the ±10 V range)</td></tr><tr><td><strong>Absolute Maximum Input Voltage</strong></td><td>±50 V relative to GND</td></tr><tr><td><strong>Bandwidth</strong></td><td>Small signal (-3 dB): 400 kHz</td></tr><tr><td><strong>Maximum Noise</strong> </td><td>&#x3C; 3 mV<sub>rms</sub></td></tr><tr><td><strong>Recommended Warm-up Time</strong></td><td>5 minutes</td></tr></tbody></table>

## Analog Output

A single bank of **16 simultaneously sampled Analog Output channels** is provided. Each channel uses a 16-bit resolution digital-to-analog converter and provides a ±10 V single-ended output voltage.

The user can choose one of two sampling configurations below :

* 16 channels at 1 MSPS, all channels are simultaneously sampled.
* 8 channels at 2 MSPS, only even channels (CH00, CH02, CH04, …) are simultaneously sampled while odd channels (CH01, CH03, CH05, …) are deactivated.

<figure><img src="https://2927401004-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRx4mGAP0TDheRyJ3CrkF%2Fuploads%2F3rLLWz8R2EsB6myJ8bow%2FOP4300_AO_schem.png?alt=media&amp;token=2a6e6316-14c5-4433-9de4-8ebe86b9151d" alt=""><figcaption><p><em>High-Level Circuit Diagram per Analog Output channel</em></p></figcaption></figure>

<table data-header-hidden data-search="false"><thead><tr><th></th><th></th></tr></thead><tbody><tr><td><strong>Number of channels</strong></td><td>16 sampled at 1 MSPS<br>8 sampled at 2 MSPS</td></tr><tr><td><strong>Connector</strong></td><td>P4 channels 00 to 15</td></tr><tr><td><strong>Resolution</strong> </td><td>16 bits</td></tr><tr><td><strong>Voltage Range</strong></td><td>±10 V</td></tr><tr><td><strong>Output Impedance</strong></td><td>&#x3C; 3 Ω</td></tr><tr><td><strong>Minimum Load Impedance</strong></td><td>400 Ω (25 mA at 10 V)</td></tr><tr><td><strong>Protection</strong></td><td>Output shorted to GND<br>Output shorted to another output</td></tr><tr><td><strong>Rise &#x26; Fall Time (no load)</strong></td><td>&#x3C; 670 ns typical (20 V step, 10%-90%)</td></tr><tr><td><strong>Accuracy</strong></td><td>1% on the ±10 V range</td></tr><tr><td><strong>Maximum Noise</strong> </td><td>&#x3C; 3 mVrms</td></tr><tr><td><strong>Recommended Warm-up time</strong></td><td>5 minutes</td></tr></tbody></table>

## Digital Input

<table data-header-hidden data-search="false"><thead><tr><th></th><th></th></tr></thead><tbody><tr><td><strong>Number of Channels</strong></td><td>32</td></tr><tr><td><strong>Connector</strong></td><td><p>P2 channels 00 to 15</p><p>P3 channels 16 to 31</p></td></tr><tr><td><strong>Voltage Range</strong></td><td>3.3 V or 5 V TTL, configurable for entire card via software.<br>By default, all banks are set to 5 V TTL.</td></tr><tr><td><strong>Isolation</strong></td><td>None</td></tr><tr><td><strong>Input Impedance (DC)</strong></td><td>> 100 kΩ</td></tr><tr><td><strong>Input Threshold at 5 V</strong></td><td>V<sub>IL</sub>1.5 V<br>V<sub>IH</sub> 3.5 V</td></tr><tr><td><strong>Input Threshold at 3.3 V</strong></td><td>V<sub>IL</sub> 0.8 V<br>V<sub>IH</sub> 2.0 V</td></tr><tr><td><strong>Absolute Maximum Input Voltage</strong></td><td>Min: -0.5 V<br>Max: Voltage range + 0.5 V</td></tr><tr><td><strong>Rise Time /</strong> <strong>Fall Time</strong></td><td>No minimum required, Schmitt-trigger input</td></tr><tr><td><strong>Propagation Delay</strong></td><td>&#x3C; 35 ns</td></tr><tr><td><strong>Minimum Pulse</strong></td><td>&#x3C; 50 ns</td></tr><tr><td><strong>Maximum Toggling Rate</strong></td><td>> 20 Mb/s</td></tr></tbody></table>

## Digital Output

<table data-header-hidden data-search="false"><thead><tr><th></th><th></th></tr></thead><tbody><tr><td><strong>Number of Channels</strong></td><td>32</td></tr><tr><td><strong>Connector</strong></td><td><p><strong>P5</strong> channels 00 to 15</p><p><strong>P6</strong> channels 16 to 31</p></td></tr><tr><td><strong>Voltage Range</strong></td><td>3.3 V or 5 V TTL, configurable for entire card via software.<br>By default, all banks are set to 5 V TTL.</td></tr><tr><td><strong>Isolation</strong></td><td>None</td></tr><tr><td><strong>Output Impedance</strong></td><td>~ 40 Ω</td></tr><tr><td><strong>Current Limit</strong></td><td>16 mA per channel</td></tr><tr><td><strong>Output Threshold Voltage at 5 V</strong></td><td><p>V<sub>OL</sub> 0.55 V</p><p>V<sub>OH</sub> 4.3 V</p></td></tr><tr><td><strong>Output Threshold Voltage at 3.3 V</strong></td><td><p>V<sub>OL</sub> 0.55 V</p><p>V<sub>OH</sub> 2.7 V</p></td></tr><tr><td><strong>Protection</strong></td><td>Output shorted to GND<br>Output shorted to another output</td></tr><tr><td><strong>Rise Time /</strong> <strong>Fall Time</strong></td><td>&#x3C; 4 ns</td></tr><tr><td><strong>Propagation Delay</strong></td><td>&#x3C; 35 ns</td></tr><tr><td><strong>Minimum Pulse</strong></td><td>&#x3C; 50 ns</td></tr><tr><td><strong>Maximum Toggling Rate</strong></td><td>> 20 Mb/s</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/op4300/operate-the-unit/connect-analog-and-digital-i-os/i-os-specifications.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
