> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/op4605xg2/supplementary-operations/access-the-simulator-remotely-via-ipmi/configure-ipmi.md).

# Configure IPMI

{% hint style="info" %}
Note that even if you don’t use IPMI, **an Ethernet cable must always be connected to the simulator** and **IPMI must be configured**.
{% endhint %}

By default, OPAL-RT configures the simulator’s IPMI to use **DHCP**.\
This procedure explains how to set a **fixed IP address** if required. *(This step is optional)*

Consult **your IT department** to determine if a **static IP address** can be assigned to the simulator on the network. They will likely provide a range of IP addresses that your Windows host computer can communicate with.

<figure><img src="broken://spaces/7LhLoEldIvunS3fxYxrx/files/KQA57B7PEeZkqW3ka8HU" alt="" width="563"><figcaption><p>OP4605XG2, OP4610XG2, OP5020XG2, OP5025XG2</p></figcaption></figure>

{% stepper %}
{% step %}

## Connect the simulator

1. Make sure that
   1. The **provided simulator power cable** is connected to a **power source**.
   2. The **provided** **Ethernet cable** is **connected** to the **network port** on the simulator on one side and to your network (outlet, router, switch, etc.) on the other side.
   3. The **main power switch** at the **back of the simulator** is **turned On**.
2. Connect an **Ethernet cable** (not provided) **to the IPMI port** on the simulator on one side and to your network (outlet, router, switch, etc.) on the other side.
3. Connect a **monitor** (not provided) to the simulator’s **VGA port**.
4. Connect a **keyboard** (not provided) to any **USB port**.

<div align="left"><figure><img src="broken://spaces/7LhLoEldIvunS3fxYxrx/files/fepoPpoFrQZ5arcmog6X" alt="" width="227"><figcaption></figcaption></figure></div>
{% endstep %}

{% step %}

### Retrieve the IPMI IP address

1. Press the **power button** on the **front panel**.\
   The simulator starts.
2. Enter the **login credentials**.
3. **Login**: `root`
4. **Password**: See the **System Description Document** provided with your system.
   * **Note**: You will find your **System Description Document** in the “**System\_Documentation**” folder on the **USB key** delivered with your system.

<figure><img src="broken://spaces/7LhLoEldIvunS3fxYxrx/files/JIbrL74ETrItq5lBiOLY" alt="" width="335"><figcaption></figcaption></figure>

5. Once logged in, type this command: `ipmitool lan print`

<figure><img src="broken://spaces/7LhLoEldIvunS3fxYxrx/files/YyyP5eeMmBpPv1hmrzGN" alt="" width="563"><figcaption></figcaption></figure>

6. In the command output, **locate the line** “**IP Address**” and **note the IP address for IPMI**.

{% hint style="info" %}
Note that it is **not possible to ping the IPMI IP address**.
{% endhint %}

<figure><img src="broken://spaces/7LhLoEldIvunS3fxYxrx/files/IazbF5vyQ1C2peXqz0Y7" alt="" width="563"><figcaption></figcaption></figure>
{% endstep %}

{% step %}

## Access the BIOS

1. **Turn off** and **turn on** the simulator by pressing the **power button** on the **front panel**.
2. Press the <**Del**> or the **\<ESC>** key at the **system boot-up** to access the AMI BIOS Setup utility.

<figure><img src="broken://spaces/7LhLoEldIvunS3fxYxrx/files/nGCxYv6vIbIJHpl8eoO7" alt="" width="563"><figcaption></figcaption></figure>

3. Once in the setup menu, you should see the following screen.\
   From now on, use the **four arrows** to navigate **up**, **down**, **right**, and **left** and the **\<Enter>** key to **select** or **confirm**.

<figure><img src="broken://spaces/7LhLoEldIvunS3fxYxrx/files/I12i7wdASzSiUGJS6OpJ" alt="" width="563"><figcaption></figcaption></figure>
{% endstep %}

{% step %}

## Navigate to the IPMI configuration

1. In the BIOS menu, go to the **Server Mgmt** tab.
2. Select **BMC Network Configuration**.\
   *BMC = Board Management Controller*
3. Press the **\<Enter>** key.

<figure><img src="broken://spaces/7LhLoEldIvunS3fxYxrx/files/U8lbg6EL50fBxPeGzpeu" alt="" width="563"><figcaption></figcaption></figure>
{% endstep %}

{% step %}

## Configure the IPMI LAN settings

{% hint style="info" %}
We recommend using a **static address** for reliable, consistent remote management access, ensuring the simulator is always reachable before the main OS or DHCP server is up. **This use case is covered below.**

**DHCP with reservations** is an alternative that offers easier management, especially in large environments, by automating assignment while keeping a fixed IP, with a separate, isolated network for IPMI best practice. Configure your **DHCP server** to always assign the **same IP address** to the **IPMI's MAC address** (a “reservation”). This use case is not covered here. See with your IT department for **DHCP with reservations**.
{% endhint %}

1. Select **Configuration Address source**.
2. Press the **\<Enter>** key.

<figure><img src="broken://spaces/7LhLoEldIvunS3fxYxrx/files/6ihpwch0pEIkiaV1sUFG" alt="" width="563"><figcaption></figcaption></figure>

3. Select **Static**.
4. Press the **\<Enter>** key.

<figure><img src="broken://spaces/7LhLoEldIvunS3fxYxrx/files/BTkaIwQQ6I9xIxKjWCEy" alt="" width="563"><figcaption></figcaption></figure>
{% endstep %}

{% step %}

## Set the IPMI IP address

1. Move to the **Station IP address** line.
2. Press the **\<Enter>** key.
3. **Type** the desired **IP address**.
4. Press the **\<Enter>** key.

{% hint style="info" %}
Note that the **IPMI IP address** must be **unique on your network**. Consult your IT department to determine a static IP address that can be assigned to the simulator on the network.
{% endhint %}

<figure><img src="broken://spaces/7LhLoEldIvunS3fxYxrx/files/reF97wWhWpyoWpEPQOKS" alt="" width="563"><figcaption></figcaption></figure>

5. Move to the **Subnet mask** line.
6. Press the **\<Enter>** key.
7. Your network environment may require a specific subnet mask. Please check with your **IT department**.
8. **Otherwise**, you can type `255.255.255.0` as it is a common subnet mask.
9. Press the **\<Enter>** key.
10. Press the **\<Esc> key** to exit the Server Management tab.

<figure><img src="broken://spaces/7LhLoEldIvunS3fxYxrx/files/wU5zfQlYdiqoZo9mgHuS" alt="" width="563"><figcaption></figcaption></figure>
{% endstep %}

{% step %}

## Save Changes and Reset Computer

1. Move to the **Save & Exit** tab.
2. Move to the **Save changes and Reset** line.
3. Press the **\<Enter>** key.
4. Select **Yes**.
5. Press the **\<Enter>** key.
6. The changes are saved and the system reboots so the new system configuration parameters can take effect.

<figure><img src="broken://spaces/7LhLoEldIvunS3fxYxrx/files/mK22tQcjtxLynS1eD8F1" alt="" width="563"><figcaption></figcaption></figure>
{% endstep %}

{% step %}

## Verify the configuration

After rebooting, open a web browser and enter the configured IP address. You should now have remote access to the IPMI interface. For details, see **IPMI Remote Access**.
{% endstep %}
{% endstepper %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/op4605xg2/supplementary-operations/access-the-simulator-remotely-via-ipmi/configure-ipmi.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
