> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/op48hxx/input-output-modules/op48h10-description.md).

# OP48H10 Description

<figure><img src="https://3093736625-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FbcPue20dkjC0cIJWTMqQ%2Fuploads%2FxWIgDwmmtVpPUJNRNZUn%2FOP48H10.png?alt=media&amp;token=6b5c27d0-7e16-4371-a519-d0a5e59cd007" alt="" width="563"><figcaption></figcaption></figure>

The **OP48H10** is a versatile **high-speed input/output** module designed for OPAL-RT OP48xx units.It features **32 configurable digital input/output channels**, **16 fast analog input channels** and **16 fast analog output channels** with simultaneous sampling, enabling reliable and high-performance signal processing for real-time simulation and hardware-in-the-loop (HIL) applications.

For compatibility information, refer to the [Hardware Platforms Compatibility](https://www.opal-rt.com/docs/op48hxx/overview/hardware-platforms-compatibility.md) table.

## Key features

* 32 configurable digital input/output channels divided into 4 banks of 8 channels, TTL 3.3/5 V
* 16 analog input channels at 5 MSPS simultaneous sampling, ± 10 V, 16-bit resolution
* 16 analog output channels at 10 MSPS simultaneous sampling, ± 10 V, 16-bit resolution
* Factory-calibrated

## Channel architecture

### Digital Input/Output channels

There are 32 digital I/Os that are **sampled/generated simultaneously up to 25 Mb/s**. They are divided into 4 groups of 8. Each group can be configurable in direction through software. Also, the voltage of each group can be configurable independently for 3.3 V-LVTTL or 5 V-TTL.

Each channel implements the circuit shown below:

<figure><img src="https://3093736625-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FbcPue20dkjC0cIJWTMqQ%2Fuploads%2F7eeZEan8s3iPXe3FYnXy%2FOP48H10-DIO.png?alt=media&amp;token=41faf03b-7fca-40a3-9f64-b913ab0b15e8" alt=""><figcaption></figcaption></figure>

### Analog Input channels

Each channel uses a 16-bit resolution **analog-to-digital** (ADC) converter.&#x20;

Each ADC can **sample up to 5 MSPS**, all channels being simultaneously sampled.&#x20;

The figure below represents a simplified schematic of the input stage. The first filter removes excessive noise. The signal is then attenuated to bring the voltage within the range required by the ADC converter. The input can be used single-ended (±10 V) with the AIN\_N being connected to GND or can be used in fully differential mode (±10 V-diff) with a ±5 V common-mode rejection.

<figure><img src="https://3093736625-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FbcPue20dkjC0cIJWTMqQ%2Fuploads%2FuBJIXsOACPayowgycKmp%2FOP48H10-Ai.png?alt=media&amp;token=3df4b978-7aac-4fb5-b457-5e3ac738b1d1" alt="OP48H10 Analog input"><figcaption></figcaption></figure>

Factory calibration is done only in single-ended mode.

### Analog Output channels <a href="#analog-output-description" id="analog-output-description"></a>

Each channel uses a 16-bit resolution **digital-to-analog** (DAC) converter.&#x20;

Each DAC can generate up to 10 MSPS, all channels being simultaneously generated.&#x20;

The figure below represents a simplified schematic of the ±10 V output stage. The filter cuts at 10 MHz and the output is optimized to have a fast step response while reducing the noise. The output is stable for a wide variety of loads, including capacitive loads up to 20 nF.

<figure><img src="https://3093736625-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FbcPue20dkjC0cIJWTMqQ%2Fuploads%2FtFGMrqE39oSKweSfmxtX%2FOP48H10-Ao.png?alt=media&amp;token=3f055c5f-e817-4168-9050-b7efcfacad30" alt="OP48H10 Analog ouput"><figcaption></figcaption></figure>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/op48hxx/input-output-modules/op48h10-description.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
