> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/op48hxx/input-output-modules/op48h10-description/specifications.md).

# Specifications

## General

<table data-search="false"><thead><tr><th>Category</th><th>Specification</th></tr></thead><tbody><tr><td><strong>Product name</strong></td><td>OP48H10</td></tr><tr><td><strong>Module type</strong></td><td>Fast I/Os</td></tr><tr><td><strong>Form factor</strong></td><td>OPAL-RT Type-H</td></tr><tr><td><strong>Isolation</strong></td><td>None</td></tr><tr><td><strong>Operating temperature</strong></td><td>0–40 °C (32–104°F)</td></tr><tr><td><strong>Storage temperature</strong></td><td>–40 to 85 °C (–40 to 185 °F)</td></tr><tr><td><strong>Relative humidity</strong></td><td>10–90 %, non-condensing</td></tr><tr><td><strong>Maximum altitude</strong></td><td>2,000 m</td></tr><tr><td><strong>Intended use</strong></td><td>Indoor use only</td></tr></tbody></table>

## Digital inputs

<table data-search="false"><thead><tr><th>Category</th><th>Specification</th></tr></thead><tbody><tr><td><strong>Number of channels and banks</strong></td><td>32 channels divided into 4 banks of 8 channels. Each bank is configurable in software as inputs or outputs. By default, all banks are set as inputs.</td></tr><tr><td></td><td></td></tr><tr><td><strong>Voltage range</strong></td><td>3.3 V or 5 V TTL, configurable by banks via software. By default, all banks are set to 5 V TTL</td></tr><tr><td><strong>Input threshold at 5 V</strong></td><td>V<sub>IL</sub> =1.5 V V<sub>IH</sub> =3.5 V</td></tr><tr><td><strong>Input threshold at 3.5 V</strong></td><td>V<sub>IL</sub> =0.8 V V<sub>IH</sub> =2 V</td></tr><tr><td><strong>Input impedance</strong></td><td>> 100 kΩ</td></tr><tr><td><strong>Isolation</strong></td><td>None</td></tr><tr><td><strong>Minimum pulse</strong></td><td>50 ns</td></tr><tr><td><strong>Maximum toggling rate</strong></td><td>> 20 Mb/s</td></tr><tr><td><strong>Rise / fall time (no load)</strong></td><td>No minimum required (Schmitt-trigger input)</td></tr><tr><td><strong>Propagation delay</strong></td><td>≤ 25 ns</td></tr></tbody></table>

## Digital outputs

<table data-search="false"><thead><tr><th>Category</th><th>Specification</th></tr></thead><tbody><tr><td><strong>Number of channels</strong></td><td>16</td></tr><tr><td><strong>Voltage range</strong></td><td><ul><li>12 V (internally supplied “12V_PROT” rail, fixed voltage)</li><li>5-30 V (supplied by the user)</li></ul><p>The supply voltage used by digital outputs has to be routed externally into the DB37 connector (P2).</p></td></tr><tr><td><strong>Output voltage at 5 V</strong></td><td>V<sub>OL</sub>=0.55 V V<sub>OH</sub>=4.3 V</td></tr><tr><td><strong>Output voltage at 3.3 V</strong></td><td>V<sub>OL</sub>=0.55 V V<sub>OH</sub>=2.7 V</td></tr><tr><td><strong>Output impedance</strong></td><td>~ 50 Ω</td></tr><tr><td><strong>Isolation</strong></td><td>None</td></tr><tr><td><strong>Maximum toggling rate</strong></td><td>> 20 Mb/s</td></tr><tr><td><strong>Output rise/fall time</strong></td><td>&#x3C; 4 ns (no load)</td></tr><tr><td><strong>Propagation delay</strong></td><td>&#x3C; 15 ns</td></tr></tbody></table>

## Analog inputs

<table data-search="false"><thead><tr><th>Category</th><th>Specification</th></tr></thead><tbody><tr><td><strong>Number of channels</strong></td><td>16</td></tr><tr><td><strong>Maximum sampling frequency</strong></td><td>5 MSPS</td></tr><tr><td><strong>Input voltage range</strong></td><td>± 10 V differential and single-ended</td></tr><tr><td><strong>Resolution</strong></td><td>16 bits</td></tr><tr><td><strong>Input impedance</strong></td><td><ul><li>114 kΩ ± 1% to GND</li><li>228 kΩ ± 2% Differential</li></ul></td></tr><tr><td><strong>Absolute maximum input voltage</strong></td><td>± 50 V relative to GND</td></tr><tr><td><strong>Small signal bandwidth (-3 dB)</strong></td><td>1 MHz</td></tr><tr><td><strong>Absolute accuracy</strong></td><td>±10 mV on the ±10 V range</td></tr><tr><td><strong>Noise</strong></td><td>&#x3C; 2 mVrms</td></tr><tr><td><strong>Recommended warm-up time</strong></td><td>5 minutes</td></tr></tbody></table>

## Analog outputs

<table data-search="false"><thead><tr><th>Category</th><th>Specification</th></tr></thead><tbody><tr><td><strong>Number of channels</strong></td><td>16</td></tr><tr><td><strong>Maximum sampling frequency</strong></td><td>10 MSPS</td></tr><tr><td><strong>Output voltage range</strong></td><td>± 10 V</td></tr><tr><td><strong>Resolution</strong></td><td>16 bits</td></tr><tr><td><strong>Output impedance</strong></td><td>&#x3C; 3 Ω</td></tr><tr><td><strong>Maximum output current</strong></td><td>35 mA (Z<sub>LOAD</sub> > 285 Ω @ 10 V)</td></tr><tr><td><strong>Rise / fall time (no load)</strong></td><td>&#x3C; 60 ns typical (20 V step, 10%-90%)</td></tr><tr><td><strong>Accuracy</strong></td><td>±10 mV on the ±10 V range</td></tr><tr><td><strong>Output latency</strong></td><td>&#x3C; 325 ns</td></tr><tr><td><strong>Maximum noise</strong></td><td>&#x3C; 2 mV<sub>rms</sub></td></tr><tr><td><strong>Recommended warm-up time</strong></td><td>5 minutes</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/op48hxx/input-output-modules/op48h10-description/specifications.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
