> For the complete documentation index, see [llms.txt](https://www.opal-rt.com/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://www.opal-rt.com/docs/op48hxx/input-output-modules/op48h30-description.md).

# OP48H30 Description

<figure><img src="https://3093736625-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FbcPue20dkjC0cIJWTMqQ%2Fuploads%2F2EMpFLu8CtBv7b5xsGKv%2FOP48H30-board.png?alt=media&amp;token=9ae7f256-c4f1-4a4a-a262-0219649474a8" alt="" width="563"><figcaption></figcaption></figure>

The **OP48H30** is a **high-density input/output type H module** designed for OPAL-RT OP48xx unit.  It features **64 configurable digital input/output channels, 16 analog inputs** and **up to 48 analog outputs** with simultaneous sampling, enabling reliable and high-performance signal processing for real-time simulation and hardware-in-the-loop (HIL) applications.

For compatibility information, refer to the [Hardware Platforms Compatibility](https://www.opal-rt.com/docs/op48hxx/overview/hardware-platforms-compatibility.md) table.

{% hint style="info" %}
The OP48H30 module uses **HD62F connectors** instead of **DB37F connectors**. An **OP8331 splitter cable (HD62M to 2 × DB37F)** can be used to split a single HD62 port into two DB37 ports. The splitter cable is **sold separately**.
{% endhint %}

## Key features

* 64 digital input or output channels divided into 4 banks of 16 channels. Each bank is configurable as inputs or outputs by software.
  * Input: 0-30 V single-ended range with user-programmable VTH/VTL thresholds.
  * Outputs: 4.8 V internally supplied voltage or 5-30V with voltage rail externally supplied by the user.
* 16 analog input channels, sampling rate at 2 MSPS on 16 bits, ±10 V single-ended or differential range.
* Analog Output: 48 channels at 1 MSPS on 16 bits, or 24 channels at 2 MSPS on 16 bits, factory-calibrated ±10 V range

## Channel architecture

### Digital Input channels

Four banks of 16 channels are provided (up to **64 total digital inputs**), each bank has software-configurable VTH and VTL input thresholds adjustable from 0 to 30 V.

<figure><img src="https://3093736625-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FbcPue20dkjC0cIJWTMqQ%2Fuploads%2FWoVYpc09RpK5kB8VF5w1%2FOP48H30_DI_arch.png?alt=media&amp;token=f2c59cf2-7461-45c4-b3ee-662dc9d864b5" alt="OP48H30 Digital Input circuit"><figcaption><p>OP48H3t0 Digital Input High-Level Circuit Diagram (per channel)</p></figcaption></figure>

### Digital Output channels

* **Four banks of 16 output channels is provided** (up to **64 total digital inputs**)
* The supply voltage used by digital outputs has to be routed externally into the DB62 connector (P2 and P4). The user can choose between:
  * Use the internal 4.8V from the OP48H30.
  * Connecting its own supply (5-30V V range, referred to GND, see diagram below)
* Each output channel implements an **output solid-state relay** that opens if any condition below is met:
  * There is an overtemperature fault (see section below) on any Digital OUT bank
  * There is an overvoltage condition on the V<sub>USER</sub> supply rail
  * The simulator is disabling the Digital OUT banks

<figure><img src="https://3093736625-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FbcPue20dkjC0cIJWTMqQ%2Fuploads%2FoOaroBgyOSXzS3dsD3Ry%2FOP48H30_DO_arch.png?alt=media&amp;token=8e2a005f-797b-48a3-b70b-97c632efad3a" alt="OP48H20 Digital Output High-Level Circuit Diagram"><figcaption><p>OP48H30 Digital Output High-Level Circuit Diagram (per channel)</p></figcaption></figure>

### Analog input channels

**A single bank of 16 analog input channels** is provided. Each channel uses a 16-bit resolution analog-to-digital (ADC) converter. Each ADC can sample up to 2 MSPS, giving a total throughput of 16 MSPS, all channels being simultaneously sampled.&#x20;

* ±10 V differential input range (with a ±5 V common-mode rejection) or ±10 V with AIN\_N connected to GND
* 16-bit A/D conversion
* Factory-calibrated

<figure><img src="https://3093736625-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FbcPue20dkjC0cIJWTMqQ%2Fuploads%2FawDpdT6zftjfiYRQgs9o%2FOP48H30_AI_arch.png?alt=media&amp;token=14c38ed2-19df-4e1a-ba8d-e7be2b9112c6" alt="OP48H30 Analog Input High-Level Circuit Diagram (per channel)"><figcaption><p>OP48H30 Analog Input High-Level Circuit Diagram (per channel)</p></figcaption></figure>

### Analog output channels <a href="#analog-output-description" id="analog-output-description"></a>

**A single bank of 48 simultaneously sampled analog output channels** is provided. Each channel uses a 16-bit resolution digital-to-analog converter and provides a ±10V single-ended output voltage.

* The user can choose one of two sampling configurations below :
  * 48 channels at 1 MSPS, all channels are simultaneously sampled.
  * 24 channels at 2 MSPS, only even channels (CH00, CH02, CH04, …) are simultaneously sampled while odd channels (CH01, CH03, CH05, …) are deactivated.
* Factory-calibrated.

<figure><img src="https://3093736625-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FbcPue20dkjC0cIJWTMqQ%2Fuploads%2FWNWFuHAKVg04lFEnwWB2%2FOP48H30_AO_arch.png?alt=media&amp;token=f1a36801-77d5-4c67-b097-3b09c4f16227" alt=""><figcaption><p>OP48H30 Analog Output High-Level Circuit Diagram (per channel)</p></figcaption></figure>

## Thermal limitations of the digital output drivers <a href="#thermal-limitations-of-the-digital-output-drivers" id="thermal-limitations-of-the-digital-output-drivers"></a>

This section explains the safe operating conditions that must be observed to avoid overheating the output drivers. While most applications will not experience any limitations at all, one must understand the conditions that could cause overheating.

The OP48H30 output drivers’ temperature rises proportionally with:

* **The toggling rate (output frequency)** - The higher the output frequency, the higher the energy dissipated in the output drivers.
* **The output load** - (both resistive and capacitive loads) - A low impedance charge with a high capacitance will also increase the output current leading to a higher power dissipation.
* **The V**<sub>**user**</sub>**&#x20;voltage** - A V<sub>user</sub> of 30 V will cause more energy dissipation than one at 5V.
* **The number of active output drivers in a bank** - Outputs are grouped in a bank of 16 channels that are heating each other because of proximity. Consecutive channels are also in the same package. For example, channels 0 and 1 are in the same package, so channel 0 will increase the heat in channel 1 and inversely. However, channel 0 has less impact on channel 2 because they are both in different packages.

To protect the output drivers from overheating, the OP48H30 has a hardware overtemperature detection mechanism that stops the simulation and disables all the output drivers (both analog and digitals) when an overheating condition occurs. During this condition, the digital, and analog output values will be set as per the DOV mode (Default Output Values) that can be configured in RT-XSG.

The curves in the graph below represent the maximum toggling frequency under specific conditions that are defined in the table below.<br>

<figure><img src="https://3093736625-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FbcPue20dkjC0cIJWTMqQ%2Fuploads%2F5v3QVfQW0fJncGMrTVRj%2FOP48H30_overheating.png?alt=media&amp;token=8ccdee7f-51cf-4b0c-8bb8-fbb844bca9fa" alt=""><figcaption><p><mark style="background-color:red;">Curve 1</mark>: Interleaved channels, 25mA resistive load per channel<br><mark style="background-color:blue;">Curve 2</mark>: All channels, 25mA resistive load per channel<br><mark style="background-color:purple;">Curve 3</mark>: All channels, 25mA + 10nF load per channel<br><mark style="background-color:$warning;">Curve 4</mark>: Interleaved channels, 25mA + 10nF load per channel</p></figcaption></figure>

{% hint style="info" %}
**Interleaved channels means toggling either** all even or all odd channels but not both at the same time (Ex.: 0-2-4-6… or 1-3-5-7…).

**Using every other channel reduces the thermal stress on the output drivers** because they are in a different chip on the card.
{% endhint %}

**Example V**<sub>**user**</sub>**=24 V**

&#x20;If we have a load of 25 mA with 10 nF capacitance, Curve 3 reports that all channels can be used but the maximum frequency would be 0.55 Mbps (at 24 V). Reducing the channel load would proportionally allow a higher toggling rate. In the example above, reducing the load significantly would allow a higher toggling rate.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://www.opal-rt.com/docs/op48hxx/input-output-modules/op48h30-description.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
